Kernel SRU request submitted:
https://lists.ubuntu.com/archives/kernel-team/2020-July/thread.html#112154
Updating status to 'In Progress'.
** Changed in: linux (Ubuntu Focal)
Status: New => In Progress
** Changed in: ubuntu-z-systems
Status: Triaged => In Progress
** Description changed:
+ SRU Justification:
+ ==================
+
+ [Impact]
+
+ * Linux kernel panics due to kernel page fault in IRQ context when
+ running zfcp_erp_timeout_handler() calling zfcp_erp_notify().
+
+ [Fix]
+
+ * 936e6b85da0476dd2edac7c51c68072da9fb4ba2 936e6b85da04 "scsi: zfcp: Fix
+ panic on ERP timeout for previously dismissed ERP action"
+
+ [Test Case]
+
+ * Requires an IBM z13/z13s or LinuxONE Rockhopper/Emperor system (or
+ newer) connected to zfcp capcble storage sub-system.
+
+ * Initiate an (ERP) timeout (maybe by injection or by causing a slow
+ recovery otherwise).
+
+ * Monitor the system log for any kernel panics.
+
+ [Regression Potential]
+
+ * The regression can be considered as medium since the modification is
+ platform specific / limited to s390x and again limited to the zfcp
+ layer.
+
+ * Within zfcp it's further limited to the error recovery procedure (ERP)
+ of fcp and only touches zfcp_erp.c, means the code path is mainly active
+ under error conditions.
+
+ [Other]
+
+ * The above fix is upstream accepted with v5.8-rc3, hence will make it's
+ way to groovy with kernel 5.8.
+
+ * Therefore this SRU request was submitted for bionic and focal only and
+ not for groovy.
+
+ __________
+
Description: zfcp: Fix panic on ERP timeout for previously dismissed ERP
Symptom: Linux kernel panic due to kernel page fault in IRQ context
- when running zfcp_erp_timeout_handler() calling
- zfcp_erp_notify().
+ when running zfcp_erp_timeout_handler() calling
+ zfcp_erp_notify().
Problem: Suppose that, for unrelated reasons, FSF requests on behalf
- of recovery are very slow and can run into the ERP timeout.
- In the case at hand, we did adapter recovery to a large
- degree. However due to the slowness a LUN open is pending so
- the corresponding fc_rport remains blocked. After
- fast_io_fail_tmo we trigger close physical port recovery for
- the port under which the LUN should have been opened. The
- new higher order port recovery dismisses the pending LUN
- open ERP action and dismisses the pending LUN open FSF
- request. Such dismissal decouples the ERP action from the
- pending corresponding FSF request by setting
- zfcp_fsf_req->erp_action to NULL (among other things)
- [zfcp_erp_strategy_check_fsfreq()].
- If now the ERP timeout for the pending open LUN request runs
- out, we must not use zfcp_fsf_req->erp_action in the ERP
- timeout handler. This is a problem since v4.15 commit
- 75492a51568b ("s390/scsi: Convert timers to use
- timer_setup()"). Before that we intentionally only passed
- zfcp_erp_action as context argument to
- zfcp_erp_timeout_handler().
- Note: The lifetime of the corresponding zfcp_fsf_req object
- continues until a (late) response or an (unrelated) adapter
- recovery.
+ of recovery are very slow and can run into the ERP timeout.
+ In the case at hand, we did adapter recovery to a large
+ degree. However due to the slowness a LUN open is pending so
+ the corresponding fc_rport remains blocked. After
+ fast_io_fail_tmo we trigger close physical port recovery for
+ the port under which the LUN should have been opened. The
+ new higher order port recovery dismisses the pending LUN
+ open ERP action and dismisses the pending LUN open FSF
+ request. Such dismissal decouples the ERP action from the
+ pending corresponding FSF request by setting
+ zfcp_fsf_req->erp_action to NULL (among other things)
+ [zfcp_erp_strategy_check_fsfreq()].
+ If now the ERP timeout for the pending open LUN request runs
+ out, we must not use zfcp_fsf_req->erp_action in the ERP
+ timeout handler. This is a problem since v4.15 commit
+ 75492a51568b ("s390/scsi: Convert timers to use
+ timer_setup()"). Before that we intentionally only passed
+ zfcp_erp_action as context argument to
+ zfcp_erp_timeout_handler().
+ Note: The lifetime of the corresponding zfcp_fsf_req object
+ continues until a (late) response or an (unrelated) adapter
+ recovery.
Solution: Just like the regular response path ignores dismissed
- requests [zfcp_fsf_req_complete() =>
- zfcp_fsf_protstatus_eval() => return early] the ERP timeout
- handler now needs to ignore dismissed requests. So simply
- return early in the ERP timeout handler if the FSF request
- is marked as dismissed in its status flags. To protect
- against the race where zfcp_erp_strategy_check_fsfreq()
- dismisses and sets zfcp_fsf_req->erp_action to NULL after
- our previous status flag check, return early if
- zfcp_fsf_req->erp_action is NULL. After all, the former ERP
- action does not need to be woken up as that was already done
- as part of the dismissal above [zfcp_erp_action_dismiss()].
+ requests [zfcp_fsf_req_complete() =>
+ zfcp_fsf_protstatus_eval() => return early] the ERP timeout
+ handler now needs to ignore dismissed requests. So simply
+ return early in the ERP timeout handler if the FSF request
+ is marked as dismissed in its status flags. To protect
+ against the race where zfcp_erp_strategy_check_fsfreq()
+ dismisses and sets zfcp_fsf_req->erp_action to NULL after
+ our previous status flag check, return early if
+ zfcp_fsf_req->erp_action is NULL. After all, the former ERP
+ action does not need to be woken up as that was already done
+ as part of the dismissal above [zfcp_erp_action_dismiss()].
Upstream-ID: 936e6b85da0476dd2edac7c51c68072da9fb4ba2 -> kernel 5.8
Will be integrated by kernel 5.8 by groovy.
Please check that this also be integrated into 20.04
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1887774
Title:
[UBUNTU 20.04] zfcp: Fix panic on ERP timeout for previously dismissed
ERP
Status in Ubuntu on IBM z Systems:
In Progress
Status in linux package in Ubuntu:
New
Status in linux source package in Focal:
In Progress
Status in linux source package in Groovy:
New
Bug description:
SRU Justification:
==================
[Impact]
* Linux kernel panics due to kernel page fault in IRQ context when
running zfcp_erp_timeout_handler() calling zfcp_erp_notify().
[Fix]
* 936e6b85da0476dd2edac7c51c68072da9fb4ba2 936e6b85da04 "scsi: zfcp:
Fix panic on ERP timeout for previously dismissed ERP action"
[Test Case]
* Requires an IBM z13/z13s or LinuxONE Rockhopper/Emperor system (or
newer) connected to zfcp capcble storage sub-system.
* Initiate an (ERP) timeout (maybe by injection or by causing a slow
recovery otherwise).
* Monitor the system log for any kernel panics.
[Regression Potential]
* The regression can be considered as medium since the modification is
platform specific / limited to s390x and again limited to the zfcp
layer.
* Within zfcp it's further limited to the error recovery procedure
(ERP) of fcp and only touches zfcp_erp.c, means the code path is
mainly active under error conditions.
[Other]
* The above fix is upstream accepted with v5.8-rc3, hence will make
it's way to groovy with kernel 5.8.
* Therefore this SRU request was submitted for bionic and focal only
and not for groovy.
__________
Description: zfcp: Fix panic on ERP timeout for previously dismissed ERP
Symptom: Linux kernel panic due to kernel page fault in IRQ context
when running zfcp_erp_timeout_handler() calling
zfcp_erp_notify().
Problem: Suppose that, for unrelated reasons, FSF requests on behalf
of recovery are very slow and can run into the ERP timeout.
In the case at hand, we did adapter recovery to a large
degree. However due to the slowness a LUN open is pending so
the corresponding fc_rport remains blocked. After
fast_io_fail_tmo we trigger close physical port recovery for
the port under which the LUN should have been opened. The
new higher order port recovery dismisses the pending LUN
open ERP action and dismisses the pending LUN open FSF
request. Such dismissal decouples the ERP action from the
pending corresponding FSF request by setting
zfcp_fsf_req->erp_action to NULL (among other things)
[zfcp_erp_strategy_check_fsfreq()].
If now the ERP timeout for the pending open LUN request runs
out, we must not use zfcp_fsf_req->erp_action in the ERP
timeout handler. This is a problem since v4.15 commit
75492a51568b ("s390/scsi: Convert timers to use
timer_setup()"). Before that we intentionally only passed
zfcp_erp_action as context argument to
zfcp_erp_timeout_handler().
Note: The lifetime of the corresponding zfcp_fsf_req object
continues until a (late) response or an (unrelated) adapter
recovery.
Solution: Just like the regular response path ignores dismissed
requests [zfcp_fsf_req_complete() =>
zfcp_fsf_protstatus_eval() => return early] the ERP timeout
handler now needs to ignore dismissed requests. So simply
return early in the ERP timeout handler if the FSF request
is marked as dismissed in its status flags. To protect
against the race where zfcp_erp_strategy_check_fsfreq()
dismisses and sets zfcp_fsf_req->erp_action to NULL after
our previous status flag check, return early if
zfcp_fsf_req->erp_action is NULL. After all, the former ERP
action does not need to be woken up as that was already done
as part of the dismissal above [zfcp_erp_action_dismiss()].
Upstream-ID: 936e6b85da0476dd2edac7c51c68072da9fb4ba2 -> kernel 5.8
Will be integrated by kernel 5.8 by groovy.
Please check that this also be integrated into 20.04
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-z-systems/+bug/1887774/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
