** This bug is no longer a duplicate of bug 1861070
Raspberry Pi 4B: USB OTG is not working
** Package changed: linux-raspi2 (Ubuntu) => linux-raspi (Ubuntu)
** Also affects: linux-raspi (Ubuntu Focal)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-raspi2 in Ubuntu.
https://bugs.launchpad.net/bugs/1864132
Title:
g_ether missing eem support
Status in linux-raspi package in Ubuntu:
New
Status in linux-raspi source package in Eoan:
New
Status in linux-raspi source package in Focal:
New
Bug description:
I am looking into enabling EEM with g_ether by module option
use_eem=1, and g_ether won't be loaded because it has no EEM support
compiled.
Expected: EEM is compiled with g_ether (no such option for g_cdc) so
that it can be enabled by use_eem=1.
My "/sys/module/g_ether/parameters":
-r--r--r-- 1 root root 4096 Feb 20 13:40 bcdDevice
-r--r--r-- 1 root root 4096 Feb 20 13:40 dev_addr
-r--r--r-- 1 root root 4096 Feb 20 13:40 host_addr
-r--r--r-- 1 root root 4096 Feb 20 13:40 iManufacturer
-r--r--r-- 1 root root 4096 Feb 20 13:40 iProduct
-r--r--r-- 1 root root 4096 Feb 20 13:40 iSerialNumber
-r--r--r-- 1 root root 4096 Feb 20 13:40 idProduct
-r--r--r-- 1 root root 4096 Feb 20 13:40 idVendor
-rw-r--r-- 1 root root 4096 Feb 20 14:08 qmult
modinfo g_ether:
parm: idVendor:USB Vendor ID (ushort)
parm: idProduct:USB Product ID (ushort)
parm: bcdDevice:USB Device version (BCD) (ushort)
parm: iSerialNumber:SerialNumber string (charp)
parm: iManufacturer:USB Manufacturer string (charp)
parm: iProduct:USB Product string (charp)
parm: qmult:queue length multiplier at high/super speed (uint)
parm: dev_addr:Device Ethernet Address (charp)
parm: host_addr:Host Ethernet Address (charp)
parm: use_eem:use CDC EEM mode (bool)
dmesg:
...
[ 4.474689] udc-core: couldn't find an available UDC - added [g_ether] to
list of pending drivers
...
[ 5.768660] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in
SPRAM
[ 5.772414] g_ether fe980000.usb: failed to start g_ether: -2
...
---- should it be another bug? -----
There is another issue that when my laptop is connected and the with my Pi 4
reboot, the cdc_ether function provided to my laptop will not be available
again until I reconnect the cable (I have USB Y-cable + type-c adapter so I can
unplug on laptop side w/o Pi 4 losing power). I remember it was working as
expected when I was testing out OTG function.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1864132/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
