This bug is missing log files that will aid in diagnosing the problem.
While running an Ubuntu kernel (not a mainline or third-party kernel)
please enter the following command in a terminal window:
apport-collect 1883065
and then change the status of the bug to 'Confirmed'.
If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.
This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.
** Changed in: linux (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1883065
Title:
Dell Latitude/Precision: Linux hangs without plugged in power cable
Status in linux package in Ubuntu:
Incomplete
Bug description:
Already present reported in project *dell-sputnik*. (Note, it happened
here also without suspend/resume.):
1. https://bugs.launchpad.net/dell-sputnik/+bug/1661741
2. Quote from
https://bugs.launchpad.net/dell-sputnik/+bug/1661741/comments/26:
> A similar bug affects several Dell laptop models:
> - Dell 5480/5488 :
> https://bugs.launchpad.net/dell-sputnik/+bug/1866343
> - Dell E5470 :
> https://bugs.launchpad.net/dell-sputnik/+bug/1661741
> (Note that the bug https://bugs.launchpad.net/dell-sputnik/+bug/1661741
is not fixed; it has been changed, by error, to fixed. Please, it will be nice
if somebody can change the status to "confirmed")
> - Dell 7740 :
> https://bugs.launchpad.net/dell-sputnik/+bug/1871491
>
> I suppose that the bug can also affect Dell precision 7730
After experiencing this already on the Dell Latitude 5480/5488
(https://bugs.launchpad.net/dell-sputnik/+bug/1866343), we have seen
this now too with the Dell Precision 3540 (with dedicated AMD graphics
card).
Without the power cord plugged in, the system started fine, then
updating packages, including the Linux kernel, turning the system off,
and right back on, it went to GRUB, and GRUB was able to load Linux
and initrd, and starting Linux it hung.
Num lock key didn’t respond (but also didn’t blink – no idea if this
should work), and Ctrl + Alt + Del didn’t work either. So, the system
had to be powered off by pressing the power button for some (ten(?))
seconds.
Subsequent tries didn’t help, until we remembered the issues with the
other device, and plugging in the power cord fixed it.
With the power cable unplugged, it didn’t boot.
The state of the connected power cable only mattered, when starting
the Linux kernel. That means, plugging it in, when GRUB was active,
the system booted. Removing the cable, when GRUB was running, Linux
hung.
I tried to get Linux messages, but `debug nomodeset earlyprintk=efi`
didn’t get Linux to output any messages.
### Workarounds ###
I was able to get Linux booting by adding either one of the following
Linux kernel parameters.
1. `maxcpus=1` (once it started with `maxcpus=2`)
2. `nosmp`
2. `acpi=off`
3. `nolapic`
In this state, there was only one CPU online. Trying to bring one more
online, the system always froze instantly.
echo 1 | sudo tee /sys/devices/system/cpu/cpu1/online
(Nothing in pstore either.) (Where maxcpus=2` worked, we were able to
bring a third CPU online, but the system froze when trying the
fourth.)
### Reproducibilty ###
Letting the system sit over night, and trying again in the morning,
unfortunately, we did *not* test without a power cable plugged in, as
we had an idea to test the non-USB-Type-C power cable. With that the
system started.
Powering the system off, and unplugging the cable, the system booted
without issues. So something changed.
We weren’t able to get it into a state, where it doesn’t boot in the
last hour, but we would like this investigated, as we are giving these
systems to our users.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1883065/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
