Hi Joe,
The original intent of the patch was not forcing a 6Gbs drive down to
1.5Gbs after hotplug.
Noting,
SSTATUS = 275 = 0x113 = 0001 0001 0011
That corresponds to ACTIVE PM STATE | GEN1 SPEED | DEVICE DETECTED
spd = 1 (corresponds to 1.5Gbps)
One question, the print for mask came after these 2 lines of code,
right?
/* unconditionally mask off the highest bit */
bit = fls(mask) - 1;
mask &= ~(1 << bit);
In your debug kernel, would please remove the following 2 lines of code
(so the code falls thru)
if (spd > 1)
mask &= (1 << (spd - 1)) - 1;
else <=====
return -EINVAL; <===== Remove these 2 lines of
code.
And finally, at the end __sata_set_spd_needed(), would you please print
out these values?
spd
target
*scontrol
The original patch didn't force changing mask, but, it does "return -EINVAL", I
think it
may fix the problem just letting it fall thru to the end of
sata_down_spd_limit(), but it would
still help to see the original debug values and these new ones with possible
fix. Thank you.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1783906
Title:
Linux 4.15 and onwards fails to initialize some hard drives
Status in linux package in Ubuntu:
In Progress
Status in linux source package in Bionic:
In Progress
Status in linux source package in Cosmic:
In Progress
Bug description:
I have two hard drives, the main hard drive is a TOSHIBA DT01ACA200
the second backup hard drive is a Western Digital WD5003AZEX. I
installed lubuntu 18.04.1 on the Toshiba HDD and it boots just fine,
the issue is with the second hard drive, when installing the WD HDD
wouldn't even come as an option to install, and after boot the WD HDD
still wouldn't come up, this is the dmesg with the stock kernel (4.15)
https://paste.ubuntu.com/p/kpxh94v2SK/
ata6 is the WD HDD that refuses to work. The messages:
[ 302.107650] ata6: SError: { CommWake 10B8B Dispar DevExch }
[ 302.107658] ata6: hard resetting link
[ 307.860291] ata6: link is slow to respond, please be patient (ready=0)
[ 312.120898] ata6: COMRESET failed (errno=-16)
[ 363.445120] INFO: task kworker/u8:5:201 blocked for more than 120 seconds.
[ 363.445131] Not tainted 4.15.0-29-generic #31-Ubuntu
[ 363.445135] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
this message.
[ 363.445140] kworker/u8:5 D 0 201 2 0x80000000
[ 363.445155] Workqueue: events_unbound async_run_entry_fn
[ 363.445157] Call Trace:
[ 363.445171] __schedule+0x291/0x8a0
[ 363.445177] schedule+0x2c/0x80
[ 363.445182] ata_port_wait_eh+0x7c/0xf0
[ 363.445186] ? wait_woken+0x80/0x80
[ 363.445189] ata_port_probe+0x28/0x40
[ 363.445192] async_port_probe+0x2e/0x52
[ 363.445196] async_run_entry_fn+0x3c/0x150
[ 363.445199] process_one_work+0x1de/0x410
[ 363.445203] worker_thread+0x32/0x410
[ 363.445207] kthread+0x121/0x140
[ 363.445210] ? process_one_work+0x410/0x410
[ 363.445214] ? kthread_create_worker_on_cpu+0x70/0x70
[ 363.445218] ret_from_fork+0x22/0x40
Repeat constantly. Also when I try to turn off the computer, the
computer seem to freeze, the lights of the keyboard and mouse turn off
and the computer just stay on.
I tried Tiny Core 9.0 which has linux 4.14.10, and i didn't had this
issue, i also installed linux 4.14 on this lubuntu 18.04 using Ukuu
Kernel Update Utility. And with this kernel version, or any previous
version the WD HDD does work again. Here's a dmesg of lubuntu 18.04
with linux 4.14 and the WD HDD finally coming up at the end:
https://paste.ubuntu.com/p/Gd3cGFbjTJ/
Also tried with with linux 4.17 but the WD HDD would also refuse to
work on this version. Here's another dmesg with this version:
https://paste.ubuntu.com/p/PmNn96vZZv/
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: linux-image-4.15.0-29-generic 4.15.0-29.31
ProcVersionSignature: Ubuntu 4.15.0-29.31-generic 4.15.18
Uname: Linux 4.15.0-29-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version
k4.15.0-29-generic.
ApportVersion: 2.20.9-0ubuntu7.2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: testtest 756 F.... pulseaudio
/dev/snd/controlC1: testtest 756 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'NVidia_1'/'HDA NVidia at 0xfe020000 irq 22'
Mixer name : 'Realtek ALC1200'
Components : 'HDA:10ec0888,10ec0000,00100101
HDA:10de0002,10de0101,00100000'
Controls : 56
Simple ctrls : 21
Card1.Amixer.info:
Card hw:1 'NVidia'/'HDA NVidia at 0xfcffc000 irq 16'
Mixer name : 'Nvidia GPU 42 HDMI/DP'
Components : 'HDA:10de0042,38422651,00100100'
Controls : 21
Simple ctrls : 3
CurrentDesktop: LXDE
Date: Thu Jul 26 17:10:58 2018
HibernationDevice: RESUME=UUID=17e70869-516d-4b63-b900-e92e3c4b73b6
InstallationDate: Installed on 2018-07-26 (0 days ago)
InstallationMedia: Lubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64
(20180725)
MachineType: 113 1
ProcFB: 0 nouveaufb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-29-generic
root=UUID=71cf0a32-7827-49be-a2c0-cd50a72c26a1 ro quiet splash vt.handoff=1
RelatedPackageVersions:
linux-restricted-modules-4.15.0-29-generic N/A
linux-backports-modules-4.15.0-29-generic N/A
linux-firmware 1.173.1
RfKill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 09/30/2008
dmi.bios.vendor: Phoenix Technologies, LTD
dmi.bios.version: 6.00 PG
dmi.board.name: 113-M2-E113
dmi.board.vendor: EVGA
dmi.board.version: 1
dmi.chassis.asset.tag: Unknow
dmi.chassis.type: 3
dmi.chassis.vendor: EVGA
dmi.chassis.version: 113-M2-E113
dmi.modalias:
dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd09/30/2008:svn113:pn1:pvr1:rvnEVGA:rn113-M2-E113:rvr1:cvnEVGA:ct3:cvr113-M2-E113:
dmi.product.name: 1
dmi.product.version: 1
dmi.sys.vendor: 113
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1783906/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
