> First, if one is using select proprietary or out-of-tree modules (e.g. bcmwl, fglrx, NVIDIA proprietary graphics drivers, VitualBox, etc.) unless there is an extra package available for the version you are testing, you will need to uninstall the module first, in order to test the mainline kernel. If you do not uninstall these modules first, then the upstream kernel may fail to install, or boot.
Given that I'm using the nVidia drivers, I'm guessing this is not going to work. I guess I will have to wait until the next official kernel update -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1780872 Title: wake on lan is not working Status in linux package in Ubuntu: Incomplete Bug description: I'm dual-booting Ubuntu 18.04 and Windows 10. If I turn off my computer with Windows, I can turn it back on using wol. However, if I turn it off using Ubuntu the computer won't turn back on if I use wol. These are my network cards: ``` ignacio@ignacio-XPS-8930:~$ ifconfig docker0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255 inet6 fe80::42:e4ff:fe0a:9fee prefixlen 64 scopeid 0x20<link> ether 02:42:e4:0a:9f:ee txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 165 bytes 24102 (24.1 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 enp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.86.31 netmask 255.255.255.0 broadcast 192.168.86.255 inet6 fe80::955b:12c8:20b9:7645 prefixlen 64 scopeid 0x20<link> ether d8:9e:f3:85:42:8a txqueuelen 1000 (Ethernet) RX packets 50484 bytes 52395285 (52.3 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 29166 bytes 4575560 (4.5 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 19 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 1124 bytes 95423 (95.4 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1124 bytes 95423 (95.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 veth66fe4e4: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::2078:3ff:feb3:2aa1 prefixlen 64 scopeid 0x20<link> ether 22:78:03:b3:2a:a1 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 224 bytes 30503 (30.5 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 vethb50cc6f: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::5c0b:47ff:fef1:cfc9 prefixlen 64 scopeid 0x20<link> ether 5e:0b:47:f1:cf:c9 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 125 bytes 18006 (18.0 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlp3s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 5c:ea:1d:4c:61:a7 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ``` This is what ethtool tells me about my ethernet card: ``` ignacio@ignacio-XPS-8930:~$ sudo ethtool enp4s0 Settings for enp4s0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Current message level: 0x000060e4 (24804) link ifup rx_err tx_err hw wol Link detected: yes ``` And this is what happens when I try to activate wake on lan: ``` ignacio@ignacio-XPS-8930:~$ sudo ethtool -s enp4s0 wol g Cannot get current wake-on-lan settings: Operation not supported not setting wol ``` Finally, this is the infor about my distro: ``` ignacio@ignacio-XPS-8930:~$ lsb_release -rd Description: Ubuntu 18.04 LTS Release: 18.04 ``` Thanks for the help! ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ethtool 1:4.15-0ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Uname: Linux 4.15.0-23-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Mon Jul 9 18:58:08 2018 Dependencies: gcc-8-base 8-20180414-1ubuntu2 libc6 2.27-3ubuntu1 libgcc1 1:8-20180414-1ubuntu2 InstallationDate: Installed on 2018-07-07 (2 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) SourcePackage: ethtool UpgradeStatus: No upgrade log present (probably fresh install) --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC2: ignacio 4483 F.... pulseaudio /dev/snd/controlC0: ignacio 4483 F.... pulseaudio /dev/snd/controlC1: ignacio 4483 F.... pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-07 (5 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Dell Inc. XPS 8930 NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-4.15.0-23-generic root=UUID=da1fcc13-cc4b-41d4-a29f-063ccf97684e ro rootflags=subvol=@ quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-23-generic N/A linux-backports-modules-4.15.0-23-generic N/A linux-firmware 1.173.1 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip docker lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 05/31/2018 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.0.11 dmi.board.name: 0DF42J dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvr1.0.11:bd05/31/2018:svnDellInc.:pnXPS8930:pvr1.0.11:rvnDellInc.:rn0DF42J:rvrA00:cvnDellInc.:ct3:cvrNotSpecified: dmi.product.family: XPS dmi.product.name: XPS 8930 dmi.product.version: 1.0.11 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780872/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
