This bug is missing log files that will aid in diagnosing the problem.
While running an Ubuntu kernel (not a mainline or third-party kernel)
please enter the following command in a terminal window:
apport-collect 1780872
and then change the status of the bug to 'Confirmed'.
If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.
This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.
** Changed in: linux (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1780872
Title:
wake on lan is not working
Status in linux package in Ubuntu:
Incomplete
Bug description:
I'm dual-booting Ubuntu 18.04 and Windows 10. If I turn off my
computer with Windows, I can turn it back on using wol. However, if I
turn it off using Ubuntu the computer won't turn back on if I use wol.
These are my network cards:
```
ignacio@ignacio-XPS-8930:~$ ifconfig
docker0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255
inet6 fe80::42:e4ff:fe0a:9fee prefixlen 64 scopeid 0x20<link>
ether 02:42:e4:0a:9f:ee txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 165 bytes 24102 (24.1 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.86.31 netmask 255.255.255.0 broadcast 192.168.86.255
inet6 fe80::955b:12c8:20b9:7645 prefixlen 64 scopeid 0x20<link>
ether d8:9e:f3:85:42:8a txqueuelen 1000 (Ethernet)
RX packets 50484 bytes 52395285 (52.3 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 29166 bytes 4575560 (4.5 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 19
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 1124 bytes 95423 (95.4 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1124 bytes 95423 (95.4 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
veth66fe4e4: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::2078:3ff:feb3:2aa1 prefixlen 64 scopeid 0x20<link>
ether 22:78:03:b3:2a:a1 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 224 bytes 30503 (30.5 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vethb50cc6f: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::5c0b:47ff:fef1:cfc9 prefixlen 64 scopeid 0x20<link>
ether 5e:0b:47:f1:cf:c9 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 125 bytes 18006 (18.0 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp3s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 5c:ea:1d:4c:61:a7 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
```
This is what ethtool tells me about my ethernet card:
```
ignacio@ignacio-XPS-8930:~$ sudo ethtool enp4s0
Settings for enp4s0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Current message level: 0x000060e4 (24804)
link ifup rx_err tx_err hw wol
Link detected: yes
```
And this is what happens when I try to activate wake on lan:
```
ignacio@ignacio-XPS-8930:~$ sudo ethtool -s enp4s0 wol g
Cannot get current wake-on-lan settings: Operation not supported
not setting wol
```
Finally, this is the infor about my distro:
```
ignacio@ignacio-XPS-8930:~$ lsb_release -rd
Description: Ubuntu 18.04 LTS
Release: 18.04
```
Thanks for the help!
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: ethtool 1:4.15-0ubuntu1
ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18
Uname: Linux 4.15.0-23-generic x86_64
NonfreeKernelModules: nvidia_modeset nvidia
ApportVersion: 2.20.9-0ubuntu7.2
Architecture: amd64
CurrentDesktop: ubuntu:GNOME
Date: Mon Jul 9 18:58:08 2018
Dependencies:
gcc-8-base 8-20180414-1ubuntu2
libc6 2.27-3ubuntu1
libgcc1 1:8-20180414-1ubuntu2
InstallationDate: Installed on 2018-07-07 (2 days ago)
InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426)
SourcePackage: ethtool
UpgradeStatus: No upgrade log present (probably fresh install)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780872/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
