This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed- xenial' to 'verification-done-xenial'. If the problem still exists, change the tag 'verification-needed-xenial' to 'verification-failed- xenial'.
If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: verification-needed-xenial -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1775235 Title: Ubuntu 16.04 (4.4.0-127) hangs on boot with virtio-scsi MQ enabled Status in linux package in Ubuntu: Invalid Status in linux source package in Xenial: Fix Committed Bug description: == SRU Justification == The bug reporter noticed that Xenial guests running on Nutanix AHV stopped booting after they were upgraded to 4.4.0-127. Only guests with scsi mq enabled suffered from this problem. AHV is one of the few hypervisor products to offer multiqueue for virtio-scsi devices. Upon further investigation, the saw that the kernel would hang during the scanning of scsi targets. More specifically, immediately after coming across a target without any luns present. It was found the following commit introduced this regression: commit f1f609d8015e1d34d39458924dcd9524fccd4307 Author: Jay Vosburgh <jay.vosbu...@canonical.com> Date: Thu Apr 19 21:40:00 2018 +0200 The patch spins on the target's 'reqs' counter waiting for the target to quiesce. Further study revealed that virtio-scsi itself is broken in a way that it doesn't increment the 'reqs' counter when submitting requests on MQ in certain conditions. That caused the counter to go to -1 (on the completion of the first request) and the CPU to hang indefinitely. This regression is fixed by the requested SAUCE patch. == Fix == UBUNTU: SAUCE: (no-up) virtio-scsi: Increment reqs counter. == Regression Potential == Low. Limited to virtio and fixes a regression. == Test Case == A test kernel was built with this patch and tested by the original bug reporter. The bug reporter states the test kernel resolved the bug. We noticed that Ubuntu 16.04 guests running on Nutanix AHV stopped booting after they were upgraded to the latest kernel (4.4.0-127). Only guests with scsi mq enabled suffered from this problem. AHV is one of the few hypervisor products to offer multiqueue for virtio-scsi devices. Upon further investigation, we could see that the kernel would hang during the scanning of scsi targets. More specifically, immediately after coming across a target without any luns present. That's the first time the kernel destroys a target (given it doesn't have luns). This could be confirmed with gdb (attached to qemu's gdbserver): #0 0xffffffffc0045039 in ?? () #1 0xffff88022c753c98 in ?? () #2 0xffffffff815d1de6 in scsi_target_destroy (starget=0xffff88022ad62400) at /build/linux-E14mqW/linux-4.4.0/drivers/scsi/scsi_scan.c:322 This shows the guest vCPU stuck on virtio-scsi's implementation of target_destroy. Despite lacking symbols, we managed to examine the virtio_scsi_target_state to see that the 'reqs' counter was invalid: (gdb) p *(struct virtio_scsi_target_state *)starget->hostdata $6 = {tgt_seq = {sequence = 0}, reqs = {counter = -1}, req_vq = 0xffff88022cbdd9e8} (gdb) This drew our attention to the following patch which is exclusive to the Ubuntu kernel: commit f1f609d8015e1d34d39458924dcd9524fccd4307 Author: Jay Vosburgh <jay.vosbu...@canonical.com> Date: Thu Apr 19 21:40:00 2018 +0200 In a nutshell, the patch spins on the target's 'reqs' counter waiting for the target to quiesce: --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -785,6 +785,10 @@ static int virtscsi_target_alloc(struct scsi_target *starget) static void virtscsi_target_destroy(struct scsi_target *starget) { struct virtio_scsi_target_state *tgt = starget->hostdata; + + /* we can race with concurrent virtscsi_complete_cmd */ + while (atomic_read(&tgt->reqs)) + cpu_relax(); kfree(tgt); } Personally, I think this is a catastrophic way of waiting for a target to quiesce since virtscsi_target_destroy() is called with IRQs disabled from scsi_scan.c:scsi_target_destroy(). Devices which take a long time to quiesce during a target_destroy() could hog the CPU for relatively long periods of time. Nevertheless, further study revealed that virtio-scsi itself is broken in a way that it doesn't increment the 'reqs' counter when submitting requests on MQ in certain conditions. That caused the counter to go to -1 (on the completion of the first request) and the CPU to hang indefinitely. The following patch fixes the issue: --- old/linux-4.4.0/drivers/scsi/virtio_scsi.c 2018-06-04 10:23:07.000000000 -0700 +++ new/linux-4.4.0/drivers/scsi/virtio_scsi.c 2018-06-05 10:03:29.083428545 -0700 @@ -641,9 +641,10 @@ scsi_target(sc->device)->hostdata; struct virtio_scsi_vq *req_vq; - if (shost_use_blk_mq(sh)) + if (shost_use_blk_mq(sh)) { req_vq = virtscsi_pick_vq_mq(vscsi, sc); - else + atomic_inc(&tgt->reqs); + } else req_vq = virtscsi_pick_vq(vscsi, tgt); return virtscsi_queuecommand(vscsi, req_vq, sc); Signed-off-by: Felipe Franciosi <fel...@nutanix.com> Please consider this a urgent fix as all of our customers which use Ubuntu 16.04 and have MQ enabled for better performance will be affected by your latest update. Our workaround is to recommend that they disable SCSI MQ while you work on the issue. Best regards, Felipe To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1775235/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
