This bug was fixed in the package linux-oem - 4.13.0-1024.27
---------------
linux-oem (4.13.0-1024.27) xenial; urgency=medium
* linux-oem: 4.13.0-1024.27 -proposed tracker (LP: #1763296)
* [8086:3e92] display becomes blank after S3 (LP: #1763271)
- drm/i915/edp: Allow alternate fixed mode for eDP if available.
- drm/i915/dp: rename intel_dp_is_edp to intel_dp_is_port_edp
- drm/i915/dp: make is_edp non-static and rename to intel_dp_is_edp
- drm/i915/edp: Do not do link training fallback or prune modes on EDP
* No network with e1000e driver on 4.13.0-38-generic (LP: #1762693)
- e1000e: Fix e1000_check_for_copper_link_ich8lan return value.
linux-oem (4.13.0-1023.25) xenial; urgency=medium
* linux-oem: 4.13.0-1023.25 -proposed tracker (LP: #1761464)
* Fix Runtime PM for r8169 (LP: #1757422)
- r8169: only enable PCI wakeups when WOL is active
- PCI: Add pcim_set_mwi(), a device-managed pci_set_mwi()
- r8169: switch to device-managed functions in probe
- r8169: remove netif_napi_del in probe error path
- r8169: remove unneeded rpm ops in rtl_shutdown
- r8169: improve runtime pm in rtl8169_check_link_status
- r8169: improve runtime pm in general and suspend unused ports
* Ryzen/Raven Ridge USB ports do not work (LP: #1756700)
- xhci: Fix front USB ports on ASUS PRIME B350M-A
- SAUCE: xhci: Fix USB ports for Dell Inspiron 5775
* Miscellaneous Ubuntu changes
- Rebase to 4.13.0-39.44
[ Ubuntu: 4.13.0-39.44 ]
* linux: 4.13.0-39.44 -proposed tracker (LP: #1761456)
* intel-microcode 3.20180312.0 causes lockup at login screen(w/ linux-
image-4.13.0-37-generic) (LP: #1759920) // CVE-2017-5715 (Spectre v2
Intel) // CVE-2017-5754
- x86/mm: Reinitialize TLB state on hotplug and resume
* intel-microcode 3.20180312.0 causes lockup at login screen(w/ linux-
image-4.13.0-37-generic) (LP: #1759920) // CVE-2017-5715 (Spectre v2 Intel)
- Revert "x86/mm: Only set IBPB when the new thread cannot ptrace current
thread"
- x86/speculation: Use Indirect Branch Prediction Barrier in context switch
* DKMS driver builds fail with: Cannot use CONFIG_STACK_VALIDATION=y, please
install libelf-dev, libelf-devel or elfutils-libelf-devel (LP: #1760876)
- [Packaging] include the retpoline extractor in the headers
* retpoline hints: primary infrastructure and initial hints (LP: #1758856)
- [Packaging] retpoline-extract: flag *0xNNN(%reg) branches
- x86/speculation, objtool: Annotate indirect calls/jumps for objtool
- x86/speculation, objtool: Annotate indirect calls/jumps for objtool on
32bit
- x86/paravirt, objtool: Annotate indirect calls
- [Packaging] retpoline -- add safe usage hint support
- [Packaging] retpoline-check -- only report additions
- [Packaging] retpoline -- widen indirect call/jmp detection
- [Packaging] retpoline -- elide %rip relative indirections
- [Packaging] retpoline -- clear hint information from packages
- KVM: x86: Make indirect calls in emulator speculation safe
- KVM: VMX: Make indirect call speculation safe
- x86/boot, objtool: Annotate indirect jump in secondary_startup_64()
- SAUCE: early/late -- annotate indirect calls in early/late initialisation
code
- SAUCE: vga_set_mode -- avoid jump tables
- [Config] retpoline -- switch to new format
- [Packaging] retpoline hints -- handle missing files when RETPOLINE not
enabled
- [Packaging] final-checks -- remove check for empty retpoline files
* retpoline: ignore %cs:0xNNN constant indirections (LP: #1752655)
- [Packaging] retpoline -- elide %cs:0xNNNN constants on i386
* zfs system process hung on container stop/delete (LP: #1754584)
- SAUCE: Fix non-prefaulted page deadlock (LP: #1754584)
* zfs-linux 0.6.5.11-1ubuntu5 ADT test failure with linux 4.15.0-1.2
(LP: #1737761)
- SAUCE: (noup) Update zfs to 0.6.5.11-1ubuntu3.2
* AT_BASE_PLATFORM in AUXV is absent on kernels available on Ubuntu 17.10
(LP: #1759312)
- powerpc/64s: Fix NULL AT_BASE_PLATFORM when using DT CPU features
* btrfs and tar sparse truncate archives (LP: #1757565)
- Btrfs: move definition of the function btrfs_find_new_delalloc_bytes
- Btrfs: fix reported number of inode blocks after buffered append writes
* efifb broken on ThunderX-based Gigabyte nodes (LP: #1758375)
- drivers/fbdev/efifb: Allow BAR to be moved instead of claiming it
* Intel i40e PF reset due to incorrect MDD detection (continues...)
(LP: #1723127)
- i40e/i40evf: Account for frags split over multiple descriptors in check
linearize
* Fix an issue that when system in S3, USB keyboard can't wake up the system.
(LP: #1759511)
- ACPI / PM: Allow deeper wakeup power states with no _SxD nor _SxW
* [8086:3e92] display becomes blank after S3 (LP: #1759188)
- drm/i915: Apply Display WA #1183 on skl, kbl, and cfl
* add audio kernel patches for Raven (LP: #1758364)
- ALSA: hda: Add Raven PCI ID
- ALSA: hda/realtek - Fix ALC700 family no sound issue
* Cpu utilization showing system time for kvm guests (performance) (sysstat)
(LP: #1755979)
- KVM: PPC: Book3S HV: Fix guest time accounting with
VIRT_CPU_ACCOUNTING_GEN
* Kernel panic on a nfsroot system (LP: #1734327)
- Revert "UBUNTU: SAUCE: LSM stacking: add stacking support to apparmor
network hooks"
- Revert "UBUNTU: SAUCE: LSM stacking: LSM: Infrastructure management of the
remaining blobs"
* can't record sound via front headset port on the Dell Precision 3630
(LP: #1759088)
- ALSA: hda/realtek - Fix Dell headset Mic can't record
* speaker can't output sound anymore after system resumes from S3 on a lenovo
machine with alc257 (LP: #1758829)
- ALSA: hda/realtek - Fix speaker no sound after system resume
* hda driver initialization takes too much time on the machine with coffeelake
audio controller [8086:a348] (LP: #1758800)
- ALSA: hda - Force polling mode on CFL for fixing codec communication
* Let headset-mode initialization be called on Dell Precision 3930
(LP: #1757584)
- ALSA: hda/realtek - Add headset mode support for Dell laptop
* ubuntu_zram_smoke test will cause soft lockup on Artful ThunderX ARM64
(LP: #1755073)
- SAUCE: crypto: thunderx_zip: Fix fallout from CONFIG_VMAP_STACK
* [Hyper-V] include kvp fix for Avoid reading past allocated blocks from KVP
file (LP: #1750349)
- hv: kvp: Avoid reading past allocated blocks from KVP file
* IMA policy parsing is broken in 4.13 (LP: #1755804)
- ima/policy: fix parsing of fsuuid
* external mic not work on Dell OptiPlex 7460 AIO (LP: #1755954)
- ALSA: hda/realtek - Add headset mode support for Dell laptop
* sbsa watchdog crashes thunderx2 system (LP: #1755595)
- watchdog: sbsa: use 32-bit read for WCV
* CVE-2018-8043
- net: phy: mdio-bcm-unimac: fix potential NULL dereference in
unimac_mdio_probe()
-- Timo Aaltonen <timo.aalto...@canonical.com> Thu, 12 Apr 2018
11:12:33 +0300
** Changed in: linux-oem (Ubuntu Xenial)
Status: Fix Committed => Fix Released
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5715
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5754
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2018-8043
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1762693
Title:
No network with e1000e driver on 4.13.0-38-generic
Status in HWE Next:
New
Status in linux package in Ubuntu:
Fix Released
Status in linux-oem package in Ubuntu:
Fix Released
Status in linux source package in Xenial:
Invalid
Status in linux-oem source package in Xenial:
Fix Released
Status in linux source package in Artful:
Fix Committed
Status in linux-oem source package in Artful:
Invalid
Bug description:
===SRU Justification===
[Impact]
e1000e stops working since 4.13.0-38-generic/4.13.0-1022-oem.
The regression was introduced by patches in LP: #1730550.
[Fix]
Commit 4110e02eb45ea447ec6f5459c9934de0a273fb91 fixes the issue.
e1000e now reports correct link status.
[Test]
With the extra commit, the e1000e starts to working again.
[Regression Potential]
Low.
It says:
Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up")
So it's pretty clear this patch is to fix the regression.
It's in upstream linux-stable, so only Arftul needs this patch.
===Original Bug Report===
When my computer boots with the most recent kernel 4.13.0-38-generic, I don't
have a working network connection. ethtool reports that my network interface
doesn't have a connection:
martin@dogmeat ~ % cat ethtool.txt
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: Unknown!
Duplex: Unknown! (255)
Port: Twisted Pair
PHYAD: 2
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown (auto)
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
dmesg contains suspicious e1000e error messages:
martin@dogmeat ~ % tail -n 40 dmesg.txt
[ 20.211715] Could not find valid key in user session keyring for sig
specified in mount option: [459a10809c211381]
[ 20.211716] One or more global auth toks could not properly register; rc =
[-2]
[ 20.211717] Error parsing options; rc = [-2]
[ 25.824466] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 25.969587] e1000e 0000:00:1f.6 eth0: changing MTU from 1500 to 1492
[ 30.034472] e1000e 0000:00:1f.6 eth0: changing MTU from 1492 to 1500
[ 35.808558] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 35.939670] e1000e 0000:00:1f.6 eth0: changing MTU from 1500 to 1492
[ 40.037526] e1000e 0000:00:1f.6 eth0: changing MTU from 1492 to 1500
[ 46.048494] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 46.263237] e1000e 0000:00:1f.6 eth0: changing MTU from 1500 to 1492
[ 51.022052] e1000e 0000:00:1f.6 eth0: changing MTU from 1492 to 1500
[ 51.244686] ahci 0000:00:17.0: port does not support device sleep
[ 56.800544] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 56.935347] e1000e 0000:00:1f.6 eth0: changing MTU from 1500 to 1492
[ 61.036903] e1000e 0000:00:1f.6 eth0: changing MTU from 1492 to 1500
[ 67.040536] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 67.199669] e1000e 0000:00:1f.6 eth0: changing MTU from 1500 to 1492
[ 72.038713] e1000e 0000:00:1f.6 eth0: changing MTU from 1492 to 1500
[ 78.048576] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 78.170825] e1000e 0000:00:1f.6 eth0: changing MTU from 1500 to 1492
[ 83.038119] e1000e 0000:00:1f.6 eth0: changing MTU from 1492 to 1500
[ 88.800521] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 88.938939] e1000e 0000:00:1f.6 eth0: changing MTU from 1500 to 1492
[ 93.021350] e1000e 0000:00:1f.6 eth0: changing MTU from 1492 to 1500
[ 99.040543] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 99.163603] e1000e 0000:00:1f.6 eth0: changing MTU from 1500 to 1492
[ 104.038668] e1000e 0000:00:1f.6 eth0: changing MTU from 1492 to 1500
[ 110.048532] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 110.191137] e1000e 0000:00:1f.6 eth0: changing MTU from 1500 to 1492
[ 115.022823] e1000e 0000:00:1f.6 eth0: changing MTU from 1492 to 1500
[ 120.800524] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 120.910537] e1000e 0000:00:1f.6 eth0: changing MTU from 1500 to 1492
[ 125.019509] e1000e 0000:00:1f.6 eth0: changing MTU from 1492 to 1500
[ 131.040530] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 131.164741] e1000e 0000:00:1f.6 eth0: changing MTU from 1500 to 1492
[ 136.039268] e1000e 0000:00:1f.6 eth0: changing MTU from 1492 to 1500
[ 142.048536] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 142.186891] e1000e 0000:00:1f.6 eth0: changing MTU from 1500 to 1492
[ 147.038361] e1000e 0000:00:1f.6 eth0: changing MTU from 1492 to 1500
Everything works fine when I boot Linux 4.13.0-37-generic.
ProblemType: Bug
DistroRelease: Ubuntu 17.10
Package: linux-image-4.13.0-38-generic 4.13.0-38.43
ProcVersionSignature: Ubuntu 4.13.0-38.43-generic 4.13.16
Uname: Linux 4.13.0-38-generic x86_64
ApportVersion: 2.20.7-0ubuntu3.7
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: martin 2756 F.... pulseaudio
CurrentDesktop: MATE
Date: Tue Apr 10 11:34:19 2018
EcryptfsInUse: Yes
IwConfig:
lo no wireless extensions.
eth0 no wireless extensions.
MachineType: System manufacturer System Product Name
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-38-generic
root=UUID=8ee32f29-87ea-4229-8807-35171b6dfeed ro quiet splash nomdmonddf
nomdmonisw nomdmonddf nomdmonisw nomdmonddf nomdmonisw nomdmonddf nomdmonisw
vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-4.13.0-38-generic N/A
linux-backports-modules-4.13.0-38-generic N/A
linux-firmware 1.169.3
RfKill:
SourcePackage: linux
UpgradeStatus: Upgraded to artful on 2018-01-23 (76 days ago)
dmi.bios.date: 09/20/2016
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 2002
dmi.board.asset.tag: Default string
dmi.board.name: H170-PRO/USB 3.1
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: Rev X.0x
dmi.chassis.asset.tag: Default string
dmi.chassis.type: 3
dmi.chassis.vendor: Default string
dmi.chassis.version: Default string
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvr2002:bd09/20/2016:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH170-PRO/USB3.1:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring:
dmi.product.family: To be filled by O.E.M.
dmi.product.name: System Product Name
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1762693/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
