rusart, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com /daily-live/current/ .
If it remains an issue, could you please run the following command in the development release from a Terminal (Applications->Accessories->Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux <replace-with-bug-number> Also, could you please test the latest upstream kernel available following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Please do not test the daily kernel folder, but the one all the way at the bottom. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.12-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** This bug is no longer a duplicate of bug 638791 old and faulty rt2860sta [The self compiled rt2860sta works.] ** Summary changed: - Can't connect to Access Point D-Link DWL-2100AP with WPA(2) Personal + 1814:0781 Can't connect to Access Point D-Link DWL-2100AP with WPA(2) Personal ** Changed in: linux (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/362533 Title: 1814:0781 Can't connect to Access Point D-Link DWL-2100AP with WPA(2) Personal Status in “linux” package in Ubuntu: Incomplete Bug description: Can't connect to Access Point D-Link DWL-2100AP WPA(2) Personal with RaLink RT2860 (Fujitsu-Siemens Amilo Pi3540): 04:00.0 Network controller [0280]: RaLink RT2860 [1814:0781] Subsystem: Lite-On Communications Inc Device [11ad:6600] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting <?> Kernel driver in use: rt2860 Kernel modules: rt2860sta Problem has been fixed after setting on access point (!) Cypher algorithm from "Auto" to "AES". Maybe there is errors in communication between controller and access point. Description: Ubuntu 9.04 Release: 9.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/362533/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
