Hi, my 16.04 is suffering from this bug even though a fix has been
released (apparently) 3 years ago.
Here's a (slightly sanitized) snippet of the syslog:
===============================================
Jul 19 15:06:48 udisksd[2434]: message repeated 13 times: [ Error updating ATA
smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)]
Jul 19 15:06:57 udisksd[2434]: Error performing housekeeping for drive
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002: Error
updating SMART data: sk_disk_smart_status: Input/output error
(udisks-error-quark, 0)
Jul 19 15:07:18 udisksd[2434]: Error updating ATA smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
Jul 19 15:08:20 udisksd[2434]: message repeated 2 times: [ Error updating ATA
smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)]
Jul 19 15:09:21 udisksd[2434]: Error updating ATA smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
Jul 19 15:12:25 udisksd[2434]: message repeated 6 times: [ Error updating ATA
smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)]
Jul 19 15:12:32 smartd[1034]: Device: /dev/sda [SAT], SMART Usage Attribute:
194 Temperature_Celsius changed from 38 to 40
Jul 19 15:12:32 smartd[1034]: Device: /dev/sda [SAT], Read SMART Self-Test Log
worked again, warning condition reset after 1 email
Jul 19 15:12:32 smartd[1034]: Device: /dev/sda [SAT], Read Summary SMART Error
Log failed
Jul 19 15:12:32 smartd[1034]: Device: /dev/sdb [SAT], SMART Usage Attribute:
190 Airflow_Temperature_Cel changed from 68 to 66
Jul 19 15:12:32 smartd[1034]: Device: /dev/sdb [SAT], SMART Usage Attribute:
194 Temperature_Celsius changed from 32 to 34
Jul 19 15:12:33 smartd[1034]: Device: /dev/sdc [SAT], SMART Prefailure
Attribute: 1 Raw_Read_Error_Rate changed from 120 to 99
Jul 19 15:12:33 smartd[1034]: Device: /dev/sdc [SAT], SMART Usage Attribute:
194 Temperature_Celsius changed from 36 to 38
Jul 19 15:12:33 smartd[1034]: Device: /dev/sdc [SAT], SMART Usage Attribute:
195 ECC_Uncorr_Error_Count changed from 120 to 99
Jul 19 15:12:56 udisksd[2434]: Error updating ATA smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
Jul 19 15:14:59 udisksd[2434]: message repeated 4 times: [ Error updating ATA
smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)]
Jul 19 15:15:29 udisksd[2434]: Error updating ATA smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
Jul 19 15:16:31 udisksd[2434]: message repeated 2 times: [ Error updating ATA
smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)]
Jul 19 15:16:57 udisksd[2434]: Error performing housekeeping for drive
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002: Error
updating SMART data: sk_disk_smart_status: Input/output error
(udisks-error-quark, 0)
Jul 19 15:17:01 udisksd[2434]: Error updating ATA smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
Jul 19 15:17:32 udisksd[2434]: Error updating ATA smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
Jul 19 15:21:07 udisksd[2434]: message repeated 7 times: [ Error updating ATA
smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)]
Jul 19 15:21:37 udisksd[2434]: Error updating ATA smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
Jul 19 15:22:08 udisksd[2434]: Error updating ATA smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
Jul 19 15:26:44 udisksd[2434]: message repeated 9 times: [ Error updating ATA
smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)]
Jul 19 15:26:57 udisksd[2434]: Error performing housekeeping for drive
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002: Error
updating SMART data: sk_disk_smart_status: Input/output error
(udisks-error-quark, 0)
Jul 19 15:27:15 udisksd[2434]: Error updating ATA smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
Jul 19 15:29:48 udisksd[2434]: message repeated 4 times: [ Error updating ATA
smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)]
Jul 19 15:30:18 udisksd[2434]: Error updating ATA smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
Jul 19 15:34:52 udisksd[2434]: message repeated 9 times: [ Error updating ATA
smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)]
Jul 19 15:35:23 udisksd[2434]: Error updating ATA smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
Jul 19 15:36:55 udisksd[2434]: message repeated 3 times: [ Error updating ATA
smart for
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002:
sk_disk_smart_status: Input/output error (udisks-error-quark, 0)]
Jul 19 15:36:57 udisksd[2434]: Error performing housekeeping for drive
/org/freedesktop/UDisks2/drives/KINGSTON_SUV400S37480G_50026B72650C5002: Error
updating SMART data: sk_disk_smart_status: Input/output error
(udisks-error-quark, 0)
===============================================
I have 3 drives in this computer:
the affected Kingston SSD (sda)
an unaffected mechanical HDD (sdb)
an older and unaffected Corsair SSD (sdc)
The Kingston is brand-new (a recent upgrade to an old computer originally built
at the end of 2010)
Here's smartctl's output for this drive:
===============================================
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-31-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: KINGSTON SUV400S37480G
Serial Number: 50026B72650C5002
LU WWN Device Id: 0 550380 440010000
Firmware Version: 0C3FD6SD
User Capacity: 480,103,981,056 bytes [480 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: M.2
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: Unknown(0x0ffe), ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Jul 19 15:48:44 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Read SMART Thresholds failed: scsi error badly formed scsi parameters
=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error badly formed scsi parameters
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 5) minutes.
Conveyance self-test routine
recommended polling time: ( 0) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 48
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 --- Pre-fail Always
- 0
5 Reallocated_Sector_Ct 0x0033 100 100 --- Pre-fail Always
- 0
9 Power_On_Hours 0x0032 100 100 --- Old_age Always
- 38
12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always
- 12
100 Unknown_Attribute 0x0032 100 100 --- Old_age Always
- 146240
101 Unknown_Attribute 0x0032 100 100 --- Old_age Always
- 115136
170 Unknown_Attribute 0x0032 100 100 --- Old_age Always
- 0
171 Unknown_Attribute 0x0032 100 100 --- Old_age Always
- 0
172 Unknown_Attribute 0x0032 100 100 --- Old_age Always
- 0
174 Unknown_Attribute 0x0032 100 100 --- Old_age Always
- 1
175 Program_Fail_Count_Chip 0x0032 100 100 --- Old_age Always
- 0
176 Erase_Fail_Count_Chip 0x0032 100 100 --- Old_age Always
- 0
177 Wear_Leveling_Count 0x0032 100 100 --- Old_age Always
- 21
178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 --- Old_age Always
- 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 --- Old_age Always
- 2633
183 Runtime_Bad_Block 0x0032 100 100 --- Old_age Always
- 1
187 Reported_Uncorrect 0x0033 100 100 --- Pre-fail Always
- 0
194 Temperature_Celsius 0x0022 042 100 --- Old_age Always
- 42 (Min/Max 22/46)
195 Hardware_ECC_Recovered 0x0032 100 100 --- Old_age Always
- 0
196 Reallocated_Event_Count 0x0032 100 100 --- Old_age Always
- 0
197 Current_Pending_Sector 0x0032 100 100 --- Old_age Always
- 0
199 UDMA_CRC_Error_Count 0x0012 100 100 --- Old_age Always
- 0
201 Unknown_SSD_Attribute 0x0032 100 100 --- Old_age Always
- 0
204 Soft_ECC_Correction 0x0032 100 100 --- Old_age Always
- 0
231 Temperature_Celsius 0x0032 100 100 --- Old_age Always
- 0
233 Media_Wearout_Indicator 0x0032 100 100 --- Old_age Always
- 260
234 Unknown_Attribute 0x0032 100 100 --- Old_age Always
- 180
241 Total_LBAs_Written 0x0032 100 100 --- Old_age Always
- 238
242 Total_LBAs_Read 0x0032 100 100 --- Old_age Always
- 118
250 Read_Error_Retry_Rate 0x0032 100 100 --- Old_age Always
- 0
Read SMART Log Directory failed: scsi error badly formed scsi parameters
Read SMART Error Log failed: scsi error badly formed scsi parameters
Read SMART Self-test Log failed: scsi error badly formed scsi parameters
Read SMART Selective Self-test Log failed: scsi error badly formed scsi
parameters
===============================================
I don't really mind the fact that a new SSD isn't supported completely
right out-of-the-box, but I do mind the syslog-spamming.
Is there a way to turn off the warning messages?
Alternatively, a fix would be very much appreciated ;-)
BTW, I don't know if this is a regression when compared to earlier
Ubuntu releases. I reinstalled the system from scratch when I got the
Kingston SSD.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to libatasmart in Ubuntu.
https://bugs.launchpad.net/bugs/1143495
Title:
udisks reporting input/output error that seems to be nonsense
Status in libatasmart:
Confirmed
Status in udisks:
Unknown
Status in libatasmart package in Ubuntu:
Fix Released
Status in udisks package in Ubuntu:
Invalid
Status in udisks2 package in Ubuntu:
Invalid
Bug description:
My syslog is full of entries that look like this:
Mar 3 12:06:45 faldara udisksd[2630]: Error performing housekeeping
for drive
/org/freedesktop/UDisks2/drives/WDC_WD360GD_00FNA0_WD_WMAH91337618:
Error updating SMART data: sk_disk_smart_status: Input/output error
(udisks-error-quark, 0)
And opening the disks utility shows invalid smart data, and choosing
to update the smart data also reports an I/O error. Using smartctl on
the command line though says this disk is fine:
root@faldara:~# smartctl -a /dev/sdc
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-7-generic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Raptor
Device Model: WDC WD360GD-00FNA0
Serial Number: WD-WMAH91337618
Firmware Version: 35.06K35
User Capacity: 37,019,566,080 bytes [37.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Mar 3 23:25:55 2013 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1572) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 28) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0007 088 084 021 Pre-fail Always
- 2100
4 Start_Stop_Count 0x0032 095 095 040 Old_age Always
- 5566
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always
- 0
9 Power_On_Hours 0x0032 080 080 000 Old_age Always
- 14706
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always
- 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always
- 5255
194 Temperature_Celsius 0x0022 109 253 000 Old_age Always
- 34
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always
- 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0009 200 125 051 Pre-fail Offline
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed without error 00% 942 -
# 2 Extended offline Completed without error 00% 232 -
# 3 Extended offline Completed without error 00% 145 -
# 4 Extended offline Completed without error 00% 62 -
# 5 Extended offline Completed without error 00% 761 -
# 6 Extended offline Completed without error 00% 562 -
# 7 Extended offline Completed without error 00% 696 -
# 8 Extended offline Completed without error 00% 192 -
# 9 Extended offline Completed without error 00% 888 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@faldara:~#
To manage notifications about this bug go to:
https://bugs.launchpad.net/libatasmart/+bug/1143495/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
