** Description changed: This card remains unsupported out-of-the-box by the ath10k_pci kernel module. At this point, it looks like kvalo's ath10k-firmware repo just needs to be pulled in. --------------------------------------------------------------------------- HOW TO GET THIS CARD TO WORK: As of February 26, 2016, this has become rather simple. - According to the Linux Wireless wiki, support was added in kernel 4.2, - so if your kernel is older than this, you'll need to either use - backports or install a newer kernel. Your kernel is probably fine, but - if it's older than 4.2, see + According to the Linux Wireless wiki, support was added in kernel 4.2 + Your kernel is probably fine, but if it's older than 4.2, see https://wiki.ubuntu.com/Kernel/MainlineBuilds for info on installing a newer one. 1) Get the latest firmware from https://github.com/kvalo/ath10k- firmware/archive/master.zip 2) Unzip this file, and copy the contents of ath10k-firmware-master to /lib/firmware/ath10k. 3) Rename two of the firmware files like so: cd /lib/firmware/QCA6174/hw2.1 sudo mv firmware-5.bin_SW_RM.1.1.1-00157-QCARMSWPZ-1 firmware-5.bin cd /lib/firmware/QCA6174/hw3.0 sudo mv firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1 firmware-4.bin 4) Reboot your computer. Run "lshw -C network" to see if your card is recognized. If you created a "/lib/modprobe.d/ath10k.conf" file earlier to disable otp, you can remove it. I did, and the card still works fine. - Last updated Match 20, 2016 + Last updated Match 26, 2016
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1436940 Title: Qualcomm Atheros QCA6164 802.11ac Wireless Network Adapter [168c:0041] is not supported Status in linux package in Ubuntu: Confirmed Status in linux-firmware package in Ubuntu: Confirmed Status in linux source package in Vivid: Confirmed Status in linux source package in Wily: Confirmed Bug description: This card remains unsupported out-of-the-box by the ath10k_pci kernel module. At this point, it looks like kvalo's ath10k-firmware repo just needs to be pulled in. --------------------------------------------------------------------------- HOW TO GET THIS CARD TO WORK: As of February 26, 2016, this has become rather simple. According to the Linux Wireless wiki, support was added in kernel 4.2 Your kernel is probably fine, but if it's older than 4.2, see https://wiki.ubuntu.com/Kernel/MainlineBuilds for info on installing a newer one. 1) Get the latest firmware from https://github.com/kvalo/ath10k- firmware/archive/master.zip 2) Unzip this file, and copy the contents of ath10k-firmware-master to /lib/firmware/ath10k. 3) Rename two of the firmware files like so: cd /lib/firmware/QCA6174/hw2.1 sudo mv firmware-5.bin_SW_RM.1.1.1-00157-QCARMSWPZ-1 firmware-5.bin cd /lib/firmware/QCA6174/hw3.0 sudo mv firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1 firmware-4.bin 4) Reboot your computer. Run "lshw -C network" to see if your card is recognized. If you created a "/lib/modprobe.d/ath10k.conf" file earlier to disable otp, you can remove it. I did, and the card still works fine. Last updated Match 26, 2016 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1436940/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
