Jim, thank you for reporting this and helping make Ubuntu better.

Could you please provide the precise line item you are referring to?

** Description changed:

- I have no additional information, until I looked at the syslog, I didnt 
notice anything different other than a little extra hdd hits.
- Version: Ubuntu 3.13.0-74.118-generic 3.13.11-ckt30
- 00:00.0 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller 
[10de:03ea] (rev a1)
-       Subsystem: Hewlett-Packard Company Device [103c:2a58]
-       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Capabilities: [44] HyperTransport: Slave or Primary Interface
-               Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL-
-               Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
-               Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
DwFcInEn- LWO=16bit DwFcOutEn-
-               Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ 
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
-               Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit 
DwFcInEn- LWO=8bit DwFcOutEn-
-               Revision ID: 1.03
-               Link Frequency 0: 1.0GHz
-               Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
-               Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
-               Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
-               Link Frequency 1: 200MHz
-               Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
-               Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 
600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
-               Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- 
SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
-               Prefetchable memory behind bridge Upper: 00-00
-               Bus Number: 00
-       Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
-               Mapping Address Base: 00000000fee00000
+ I have no additional information, until I looked at the syslog, I didnt
+ notice anything different other than a little extra hdd hits.
  
- 00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP61 LPC Bridge [10de:03e0] 
(rev a2)
-       Subsystem: Hewlett-Packard Company Device [103c:2a58]
-       Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0
- 
- 00:01.1 SMBus [0c05]: NVIDIA Corporation MCP61 SMBus [10de:03eb] (rev a2)
-       Subsystem: Hewlett-Packard Company Device [103c:2a58]
-       Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Interrupt: pin A routed to IRQ 10
-       Region 0: I/O ports at fc00 [size=64]
-       Region 4: I/O ports at 1c00 [size=64]
-       Region 5: I/O ports at 1c40 [size=64]
-       Capabilities: [44] Power Management version 2
-               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
-               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
-       Kernel driver in use: nForce2_smbus
- 
- 00:01.2 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller 
[10de:03f5] (rev a2)
-       Subsystem: Hewlett-Packard Company Device [103c:2a58]
-       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
-       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
- 
- 00:02.0 USB controller [0c03]: NVIDIA Corporation MCP61 USB 1.1 Controller 
[10de:03f1] (rev a3) (prog-if 10 [OHCI])
-       Subsystem: Hewlett-Packard Company Device [103c:2a58]
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0 (750ns min, 250ns max)
-       Interrupt: pin A routed to IRQ 23
-       Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
-       Capabilities: [44] Power Management version 2
-               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
-               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
-       Kernel driver in use: ohci-pci
- 
- 00:02.1 USB controller [0c03]: NVIDIA Corporation MCP61 USB 2.0 Controller 
[10de:03f2] (rev a3) (prog-if 20 [EHCI])
-       Subsystem: Hewlett-Packard Company Device [103c:2a58]
-       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0 (750ns min, 250ns max)
-       Interrupt: pin B routed to IRQ 22
-       Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
-       Capabilities: [44] Debug port: BAR=1 offset=0098
-       Capabilities: [80] Power Management version 2
-               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
-               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
-       Kernel driver in use: ehci-pci
- 
- 00:04.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI bridge [10de:03f3] 
(rev a1) (prog-if 01 [Subtractive decode])
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
-       I/O behind bridge: 0000b000-0000bfff
-       Memory behind bridge: fde00000-fdefffff
-       Prefetchable memory behind bridge: fdd00000-fddfffff
-       Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
-       BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
-               PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
-       Capabilities: [b8] Subsystem: Hewlett-Packard Company Device [103c:2a58]
-       Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
-               Mapping Address Base: 00000000fee00000
- 
- 00:05.0 Audio device [0403]: NVIDIA Corporation MCP61 High Definition Audio 
[10de:03f0] (rev a2)
-       Subsystem: Hewlett-Packard Company Device [103c:2a58]
-       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0 (500ns min, 1250ns max)
-       Interrupt: pin B routed to IRQ 22
-       Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
-       Capabilities: [44] Power Management version 2
-               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
-               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
-       Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
-               Address: 0000000000000000  Data: 0000
-               Masking: 00000000  Pending: 00000000
-       Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
-       Kernel driver in use: snd_hda_intel
- 
- 00:06.0 IDE interface [0101]: NVIDIA Corporation MCP61 IDE [10de:03ec] (rev 
a2) (prog-if 8a [Master SecP PriP])
-       Subsystem: Hewlett-Packard Company Device [103c:2a58]
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0 (750ns min, 250ns max)
-       Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) 
[size=8]
-       Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
-       Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) 
[size=8]
-       Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
-       Region 4: I/O ports at f000 [size=16]
-       Capabilities: [44] Power Management version 2
-               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
-               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
-       Kernel driver in use: pata_amd
- 
- 00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
-       Subsystem: Hewlett-Packard Company Device [103c:2a58]
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
-       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0 (250ns min, 5000ns max)
-       Interrupt: pin A routed to IRQ 42
-       Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
-       Region 1: I/O ports at ec00 [size=8]
-       Capabilities: [44] Power Management version 2
-               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
-               Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
-       Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
-               Address: 00000000fee0100c  Data: 41a1
-               Masking: 000000fe  Pending: 00000000
-       Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
-       Kernel driver in use: forcedeth
- 
- 00:08.0 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller 
[10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
-       Subsystem: Hewlett-Packard Company Device [103c:2a58]
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0 (750ns min, 250ns max)
-       Interrupt: pin A routed to IRQ 20
-       Region 0: I/O ports at 09f0 [size=8]
-       Region 1: I/O ports at 0bf0 [size=4]
-       Region 2: I/O ports at 0970 [size=8]
-       Region 3: I/O ports at 0b70 [size=4]
-       Region 4: I/O ports at d800 [size=16]
-       Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
-       Capabilities: [44] Power Management version 2
-               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
-               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
-       Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
-               Address: 0000000000000000  Data: 0000
-       Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
-       Kernel driver in use: sata_nv
- 
- 00:08.1 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller 
[10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
-       Subsystem: Hewlett-Packard Company Device [103c:2a58]
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0 (750ns min, 250ns max)
-       Interrupt: pin B routed to IRQ 21
-       Region 0: I/O ports at 09e0 [size=8]
-       Region 1: I/O ports at 0be0 [size=4]
-       Region 2: I/O ports at 0960 [size=8]
-       Region 3: I/O ports at 0b60 [size=4]
-       Region 4: I/O ports at c400 [size=16]
-       Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
-       Capabilities: [44] Power Management version 2
-               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
-               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
-       Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
-               Address: 0000000000000000  Data: 0000
-       Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
-       Kernel driver in use: sata_nv
- 
- 00:09.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge 
[10de:03e8] (rev a2) (prog-if 00 [Normal decode])
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 32 bytes
-       Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
-       I/O behind bridge: 0000a000-0000afff
-       Memory behind bridge: f8000000-fbffffff
-       Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
-       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
-       BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
-               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
-       Capabilities: [40] Subsystem: Hewlett-Packard Company Device [103c:2a58]
-       Capabilities: [48] Power Management version 2
-               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
-               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
-       Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
-               Address: 00000000fee0300c  Data: 4161
-       Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
-               Mapping Address Base: 00000000fee00000
-       Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
-               DevCap: MaxPayload 256 bytes, PhantFunc 0
-                       ExtTag- RBE+
-               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
-                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
-                       MaxPayload 128 bytes, MaxReadReq 512 bytes
-               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
-               LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit 
Latency L0s <512ns, L1 <4us
-                       ClockPM- Surprise- LLActRep+ BwNot-
-               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
-                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
-               LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
DLActive+ BWMgmt- ABWMgmt-
-               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
-                       Slot #1, PowerLimit 75.000W; Interlock- NoCompl-
-               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
-                       Control: AttnInd Off, PwrInd On, Power- Interlock-
-               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
-                       Changed: MRL- PresDet+ LinkState+
-               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
-               RootCap: CRSVisible-
-               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
-       Capabilities: [100 v1] Virtual Channel
-               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
-               Arb:    Fixed- WRR32- WRR64- WRR128-
-               Ctrl:   ArbSelect=WRR32
-               Status: InProgress-
-               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
-                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
-                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
-                       Status: NegoPending- InProgress-
-       Kernel driver in use: pcieport
- 
- 00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge 
[10de:03e9] (rev a2) (prog-if 00 [Normal decode])
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 32 bytes
-       Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
-       I/O behind bridge: 00009000-00009fff
-       Memory behind bridge: fdc00000-fdcfffff
-       Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
-       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
-       BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
-               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
-       Capabilities: [40] Subsystem: Hewlett-Packard Company Device [103c:2a58]
-       Capabilities: [48] Power Management version 2
-               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
-               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
-       Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
-               Address: 00000000fee0300c  Data: 4171
-       Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
-               Mapping Address Base: 00000000fee00000
-       Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
-               DevCap: MaxPayload 256 bytes, PhantFunc 0
-                       ExtTag- RBE+
-               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
-                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
-                       MaxPayload 128 bytes, MaxReadReq 512 bytes
-               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
-               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <512ns, L1 <4us
-                       ClockPM- Surprise- LLActRep+ BwNot-
-               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
-                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
-               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
-               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
-                       Slot #2, PowerLimit 10.000W; Interlock- NoCompl-
-               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
-                       Control: AttnInd Off, PwrInd On, Power- Interlock-
-               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
Interlock-
-                       Changed: MRL- PresDet- LinkState-
-               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
-               RootCap: CRSVisible-
-               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
-       Capabilities: [100 v1] Virtual Channel
-               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
-               Arb:    Fixed- WRR32- WRR64- WRR128-
-               Ctrl:   ArbSelect=WRR32
-               Status: InProgress-
-               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
-                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
-                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
-                       Status: NegoPending- InProgress-
-       Kernel driver in use: pcieport
- 
- 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
-       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Capabilities: [80] HyperTransport: Host or Secondary Interface
-               Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- 
<EOCErr- DUL-
-               Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
-               Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
DwFcInEn- LWO=16bit DwFcOutEn-
-               Revision ID: 1.02
-               Link Frequency: 1.0GHz
-               Link Error: <Prot- <Ovfl- <EOC- CTLTm-
-               Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
-               Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- 
ExtRS- UCnfE-
- 
- 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 
[Athlon64/Opteron] Address Map [1022:1101]
-       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
- 
- 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 
[Athlon64/Opteron] DRAM Controller [1022:1102]
-       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
- 
- 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
-       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Capabilities: [f0] Secure device <?>
-       Kernel driver in use: k8temp
- 
- 02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT200 [GeForce 
GTX 260] [10de:05e2] (rev a1) (prog-if 00 [VGA controller])
-       Subsystem: eVga.com. Corp. Device [3842:1262]
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 32 bytes
-       Interrupt: pin A routed to IRQ 43
-       Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
-       Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
-       Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
-       Region 5: I/O ports at ac00 [size=128]
-       Expansion ROM at fbf80000 [disabled] [size=512K]
-       Capabilities: [60] Power Management version 3
-               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
-               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
-       Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
-               Address: 00000000fee0300c  Data: 41c1
-       Capabilities: [78] Express (v1) Endpoint, MSI 00
-               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 
<4us
-                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
-               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
-                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
-                       MaxPayload 128 bytes, MaxReadReq 512 bytes
-               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
-               LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit 
Latency L0s <1us, L1 <1us
-                       ClockPM- Surprise- LLActRep- BwNot-
-               LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk-
-                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
-               LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk- 
DLActive- BWMgmt- ABWMgmt-
-       Capabilities: [100 v1] Virtual Channel
-               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
-               Arb:    Fixed- WRR32- WRR64- WRR128-
-               Ctrl:   ArbSelect=Fixed
-               Status: InProgress-
-               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
-                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
-                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
-                       Status: NegoPending- InProgress-
-       Capabilities: [128 v1] Power Budgeting <?>
-       Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 
Len=024 <?>
-       Kernel driver in use: nouveau
- 
- ProblemType: Bug
- DistroRelease: Ubuntu 14.04
- Package: linux-image-3.13.0-74-generic 3.13.0-74.118
- ProcVersionSignature: Ubuntu 3.13.0-74.118-generic 3.13.11-ckt30
- Uname: Linux 3.13.0-74-generic x86_64
- ApportVersion: 2.14.1-0ubuntu3.19
- Architecture: amd64
- AudioDevicesInUse:
-  USER        PID ACCESS COMMAND
-  /dev/snd/controlC0:  geekmonk  11925 F.... pulseaudio
- CRDA: Error: [Errno 2] No such file or directory: 'iw'
- Date: Sun Dec 20 00:51:01 2015
- HibernationDevice: RESUME=UUID=ac68d222-2e0d-4072-be09-23b15e8b5451
- InstallationDate: Installed on 2014-09-23 (452 days ago)
- InstallationMedia: Ubuntu-Server 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.3)
- IwConfig:
-  eth0      no wireless extensions.
-  
-  lo        no wireless extensions.
- Lsusb:
-  Bus 001 Device 003: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 Card 
Reader Controller
-  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-  Bus 002 Device 003: ID 0557:2213 ATEN International Co., Ltd CS682 2-Port 
USB 2.0 DVI KVM Switch
-  Bus 002 Device 002: ID 0557:8021 ATEN International Co., Ltd 
-  Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- MachineType: HP-Pavilion GG781AA-ABA a6110n
- ProcEnviron:
-  LANGUAGE=en_US
-  TERM=xterm
-  PATH=(custom, no user)
-  LANG=en_US.UTF-8
-  SHELL=/bin/bash
- ProcFB: 0 nouveaufb
- ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-74-generic 
root=UUID=fc69fd4c-0e1f-422f-827f-2bcd9a13fde6 ro drm.debug=0xe plymouth:debug
- RelatedPackageVersions:
-  linux-restricted-modules-3.13.0-74-generic N/A
-  linux-backports-modules-3.13.0-74-generic  N/A
-  linux-firmware                             1.127.19
- RfKill:
-  
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 10/29/2007
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 5.13
  dmi.board.name: NARRA2
  dmi.board.vendor: ASUSTek Computer INC.
  dmi.board.version: 2.00
  dmi.chassis.type: 3
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvr5.13:bd10/29/2007:svnHP-Pavilion:pnGG781AA-ABAa6110n:pvr:rvnASUSTekComputerINC.:rnNARRA2:rvr2.00:cvnHewlett-Packard:ct3:cvrChassisVersion:
  dmi.product.name: GG781AA-ABA a6110n
  dmi.sys.vendor: HP-Pavilion

** Tags added: latest-bios-5.13

** Changed in: linux (Ubuntu)
   Importance: Undecided => Low

** Changed in: linux (Ubuntu)
       Status: Confirmed => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1527966

Title:
  after latest updates, this started

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I have no additional information, until I looked at the syslog, I
  didnt notice anything different other than a little extra hdd hits.

  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 10/29/2007
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 5.13
  dmi.board.name: NARRA2
  dmi.board.vendor: ASUSTek Computer INC.
  dmi.board.version: 2.00
  dmi.chassis.type: 3
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvr5.13:bd10/29/2007:svnHP-Pavilion:pnGG781AA-ABAa6110n:pvr:rvnASUSTekComputerINC.:rnNARRA2:rvr2.00:cvnHewlett-Packard:ct3:cvrChassisVersion:
  dmi.product.name: GG781AA-ABA a6110n
  dmi.sys.vendor: HP-Pavilion

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1527966/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to     : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Reply via email to