uname -a
Linux Desktop 3.16.7-031607-generic #201410301735 SMP Thu Oct 30 17:37:43 UTC
2014 x86_64 x86_64 x86_64 GNU/Linux
First time I tested it, it successfully printed 3 jobs and than
disconnected. I turned off and on the printer and checked again. This
time it successfully printed 5 jobs without disconnection between and
after.
$ uname -a
Linux Desktop 3.18.21-031821-generic #201509020527 SMP Wed Sep 2 05:29:06 UTC
2015 x86_64 x86_64 x86_64 GNU/Linux
The issue exist here too: successfully printed first and second jobs but
then it disconnected. Here is output:
$ tail -f /var/log/syslog
Oct 3 15:55:37 Desktop colord: Profile added:
icc-0383c34650771ce95ef93fe916867725
Oct 3 15:55:37 Desktop colord: Profile added:
icc-6ad6d63767ce0393245528ada92f1cb2
Oct 3 15:55:37 Desktop colord: Profile added:
icc-c227f46f246694ba9971f270cb61a0c1
Oct 3 15:55:37 Desktop colord: Profile added:
icc-b0701c2ccf059287d0b067464df8bda9
Oct 3 15:55:37 Desktop colord: Profile added:
icc-ea421e3a65cfa796e2732ce36086e327
Oct 3 15:55:37 Desktop colord: Profile added:
icc-353a6bcabda00f04b6988f89126ce6f5
Oct 3 15:55:37 Desktop colord: Profile added:
icc-654b99c87e67edb1c1cfb0dcb7fa9d04
Oct 3 15:55:37 Desktop colord: Profile added: Samsung-ML-1250-Gray..
Oct 3 15:55:37 Desktop colord: Device added: cups-Samsung-ML-1250
Oct 3 15:55:57 Desktop blueman-mechanism: Exiting
Oct 3 15:59:01 Desktop kernel: [ 260.620350] usblp0: removed
Oct 3 15:59:12 Desktop kernel: [ 271.696027] usb 2-1: reset full-speed USB
device number 2 using uhci_hcd
Oct 3 15:59:12 Desktop kernel: [ 271.816062] usb 2-1: device descriptor
read/64, error -71
Oct 3 15:59:12 Desktop kernel: [ 272.040045] usb 2-1: device descriptor
read/64, error -71
Oct 3 15:59:12 Desktop kernel: [ 272.256049] usb 2-1: reset full-speed USB
device number 2 using uhci_hcd
Oct 3 15:59:12 Desktop kernel: [ 272.376056] usb 2-1: device descriptor
read/64, error -71
Oct 3 15:59:13 Desktop kernel: [ 272.600047] usb 2-1: device descriptor
read/64, error -71
Oct 3 15:59:13 Desktop kernel: [ 272.816074] usb 2-1: reset full-speed USB
device number 2 using uhci_hcd
Oct 3 15:59:13 Desktop kernel: [ 273.228042] usb 2-1: device not accepting
address 2, error -71
Oct 3 15:59:13 Desktop kernel: [ 273.340053] usb 2-1: reset full-speed USB
device number 2 using uhci_hcd
Oct 3 15:59:14 Desktop kernel: [ 273.748058] usb 2-1: device not accepting
address 2, error -71
Oct 3 15:59:14 Desktop kernel: [ 273.748254] usb 2-1: USB disconnect, device
number 2
Oct 3 15:59:14 Desktop udev-configure-printer: remove
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 15:59:14 Desktop kernel: [ 273.860050] usb 2-1: new full-speed USB
device number 3 using uhci_hcd
Oct 3 15:59:14 Desktop kernel: [ 274.048361] usb 2-1: New USB device found,
idVendor=04e8, idProduct=300e
Oct 3 15:59:14 Desktop kernel: [ 274.048369] usb 2-1: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
Oct 3 15:59:14 Desktop kernel: [ 274.048372] usb 2-1: Product: Samsung Laser
Printer ML-1250
Oct 3 15:59:14 Desktop kernel: [ 274.048375] usb 2-1: Manufacturer: Samsung
Electronics Co., Ltd.
Oct 3 15:59:14 Desktop kernel: [ 274.056180] usblp 2-1:1.0: usblp0: USB
Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300E
Oct 3 15:59:14 Desktop mtp-probe: checking bus 2, device 3:
"/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1"
Oct 3 15:59:14 Desktop mtp-probe: bus: 2, device: 3 was not an MTP device
Oct 3 15:59:14 Desktop udev-configure-printer: add
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 15:59:14 Desktop udev-configure-printer: device devpath is
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 15:59:14 Desktop udev-configure-printer: MFG:Samsung MDL:ML-1250 SERN:-
serial:-
Oct 3 15:59:15 Desktop kernel: [ 275.235484] usblp0: removed
Oct 3 15:59:15 Desktop kernel: [ 275.248268] usblp 2-1:1.0: usblp0: USB
Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300E
Oct 3 15:59:15 Desktop hp[1918]: io/hpmud/pp.c 627: unable to read device-id
ret=-1
Oct 3 15:59:16 Desktop python: io/hpmud/pp.c 627: unable to read device-id
ret=-1
Oct 3 15:59:16 Desktop udev-configure-printer: URI matches without serial
number: usb://Samsung/ML-1250
Oct 3 15:59:16 Desktop udev-configure-printer: No serial number URI matches so
using those without
Oct 3 15:59:16 Desktop udev-configure-printer: URI of detected printer:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 15:59:16 Desktop udev-configure-printer: URI of print queue:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 15:59:16 Desktop udev-configure-printer: Queue
ipp://localhost:631/printers/Samsung-ML-1250 has matching device URI
Oct 3 15:59:44 Desktop kernel: [ 304.315894] usblp0: removed
Oct 3 15:59:56 Desktop kernel: [ 315.972069] usb 2-1: reset full-speed USB
device number 3 using uhci_hcd
Oct 3 15:59:56 Desktop kernel: [ 316.092058] usb 2-1: device descriptor
read/64, error -71
Oct 3 15:59:56 Desktop kernel: [ 316.316057] usb 2-1: device descriptor
read/64, error -71
Oct 3 15:59:57 Desktop kernel: [ 316.532059] usb 2-1: reset full-speed USB
device number 3 using uhci_hcd
Oct 3 15:59:57 Desktop kernel: [ 316.652048] usb 2-1: device descriptor
read/64, error -71
Oct 3 15:59:57 Desktop kernel: [ 316.876035] usb 2-1: device descriptor
read/64, error -71
Oct 3 15:59:57 Desktop kernel: [ 317.092059] usb 2-1: reset full-speed USB
device number 3 using uhci_hcd
Oct 3 15:59:58 Desktop kernel: [ 317.500084] usb 2-1: device not accepting
address 3, error -71
Oct 3 15:59:58 Desktop kernel: [ 317.612041] usb 2-1: reset full-speed USB
device number 3 using uhci_hcd
Oct 3 15:59:58 Desktop kernel: [ 318.020046] usb 2-1: device not accepting
address 3, error -71
Oct 3 15:59:58 Desktop kernel: [ 318.020251] usb 2-1: USB disconnect, device
number 3
Oct 3 15:59:58 Desktop udev-configure-printer: remove
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 15:59:58 Desktop udev-configure-printer: URI of detected printer:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 15:59:58 Desktop udev-configure-printer: URI of print queue:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 15:59:58 Desktop udev-configure-printer: Queue
ipp://localhost:631/printers/Samsung-ML-1250 has matching device URI
Oct 3 15:59:58 Desktop udev-configure-printer: Disabled printer
ipp://localhost:631/printers/Samsung-ML-1250 as the corresponding device was
unplugged or turned off
Oct 3 15:59:58 Desktop kernel: [ 318.132048] usb 2-1: new full-speed USB
device number 4 using uhci_hcd
Oct 3 15:59:58 Desktop kernel: [ 318.252041] usb 2-1: device descriptor
read/64, error -71
Oct 3 15:59:59 Desktop kernel: [ 318.476055] usb 2-1: device descriptor
read/64, error -71
Oct 3 15:59:59 Desktop kernel: [ 318.692022] usb 2-1: new full-speed USB
device number 5 using uhci_hcd
Oct 3 15:59:59 Desktop kernel: [ 318.812042] usb 2-1: device descriptor
read/64, error -71
Oct 3 15:59:59 Desktop kernel: [ 319.036042] usb 2-1: device descriptor
read/64, error -71
Oct 3 15:59:59 Desktop kernel: [ 319.252046] usb 2-1: new full-speed USB
device number 6 using uhci_hcd
Oct 3 16:00:00 Desktop kernel: [ 319.660068] usb 2-1: device not accepting
address 6, error -71
Oct 3 16:00:00 Desktop kernel: [ 319.772038] usb 2-1: new full-speed USB
device number 7 using uhci_hcd
Oct 3 16:00:00 Desktop kernel: [ 320.180074] usb 2-1: device not accepting
address 7, error -71
Oct 3 16:00:00 Desktop kernel: [ 320.180122] usb usb2-port1: unable to
enumerate USB device
$ uname -a
Linux Desktop 3.19.0-30-generic #33~14.04.1-Ubuntu SMP Tue Sep 22 09:27:00 UTC
2015 x86_64 x86_64 x86_64 GNU/Linux
lsusb shows printer is connected but it's even not printed first job.
Here is output:
$ tail -f /var/log/syslog
Oct 3 16:07:23 Desktop kernel: [ 149.061541] audit: type=1400
audit(1443877643.756:34): apparmor="STATUS" operation="profile_replace"
profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action"
pid=1828 comm="apparmor_parser"
Oct 3 16:07:23 Desktop kernel: [ 149.061552] audit: type=1400
audit(1443877643.756:35): apparmor="STATUS" operation="profile_replace"
profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1828
comm="apparmor_parser"
Oct 3 16:07:23 Desktop kernel: [ 149.062064] audit: type=1400
audit(1443877643.756:36): apparmor="STATUS" operation="profile_replace"
profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action"
pid=1828 comm="apparmor_parser"
Oct 3 16:07:23 Desktop kernel: [ 149.062079] audit: type=1400
audit(1443877643.756:37): apparmor="STATUS" operation="profile_replace"
profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1828
comm="apparmor_parser"
Oct 3 16:07:23 Desktop kernel: [ 149.062351] audit: type=1400
audit(1443877643.756:38): apparmor="STATUS" operation="profile_replace"
profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1828
comm="apparmor_parser"
Oct 3 16:07:23 Desktop kernel: [ 149.084231] audit: type=1400
audit(1443877643.780:39): apparmor="STATUS" operation="profile_replace"
profile="unconfined" name="/usr/bin/evince" pid=1829 comm="apparmor_parser"
Oct 3 16:07:24 Desktop anacron[1882]: Anacron 2.3 started on 2015-10-03
Oct 3 16:07:24 Desktop anacron[1882]: Normal exit (0 jobs run)
Oct 3 16:07:24 Desktop /usr/sbin/irqbalance: Balancing is ineffective on
systems with a single cache domain. Shutting down
Oct 3 16:07:24 Desktop kernel: [ 149.912346] init: plymouth-stop pre-start
process (1955) terminated with status 1
I turned it off/on. After this it printed 2 jobs and also disconnected:
Oct 3 16:14:52 Desktop kernel: [ 598.080163] usb 2-1: USB disconnect, device
number 2
Oct 3 16:14:52 Desktop kernel: [ 598.080410] usblp0: removed
Oct 3 16:14:52 Desktop udev-configure-printer: remove
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 16:15:00 Desktop kernel: [ 605.916020] usb 2-1: new full-speed USB
device number 3 using uhci_hcd
Oct 3 16:15:00 Desktop kernel: [ 606.104199] usb 2-1: New USB device found,
idVendor=04e8, idProduct=300e
Oct 3 16:15:00 Desktop kernel: [ 606.104206] usb 2-1: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
Oct 3 16:15:00 Desktop kernel: [ 606.104210] usb 2-1: Product: Samsung Laser
Printer ML-1250
Oct 3 16:15:00 Desktop kernel: [ 606.104213] usb 2-1: Manufacturer: Samsung
Electronics Co., Ltd.
Oct 3 16:15:00 Desktop kernel: [ 606.111462] usblp 2-1:1.0: usblp0: USB
Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300E
Oct 3 16:15:00 Desktop mtp-probe: checking bus 2, device 3:
"/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1"
Oct 3 16:15:00 Desktop mtp-probe: bus: 2, device: 3 was not an MTP device
Oct 3 16:15:00 Desktop udev-configure-printer: add
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 16:15:00 Desktop udev-configure-printer: device devpath is
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 16:15:00 Desktop udev-configure-printer: MFG:Samsung MDL:ML-1250 SERN:-
serial:-
Oct 3 16:15:02 Desktop kernel: [ 607.431427] usblp0: removed
Oct 3 16:15:02 Desktop kernel: [ 607.442350] usblp 2-1:1.0: usblp0: USB
Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300E
Oct 3 16:15:02 Desktop hp[2067]: io/hpmud/pp.c 627: unable to read device-id
ret=-1
Oct 3 16:15:02 Desktop python: io/hpmud/pp.c 627: unable to read device-id
ret=-1
Oct 3 16:15:02 Desktop udev-configure-printer: URI matches without serial
number: usb://Samsung/ML-1250
Oct 3 16:15:02 Desktop udev-configure-printer: No serial number URI matches so
using those without
Oct 3 16:15:02 Desktop udev-configure-printer: URI of detected printer:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 16:15:02 Desktop udev-configure-printer: URI of print queue:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 16:15:02 Desktop udev-configure-printer: Queue
ipp://localhost:631/printers/Samsung-ML-1250 has matching device URI
Oct 3 16:15:02 Desktop udev-configure-printer: Re-enabled printer
ipp://localhost:631/printers/Samsung-ML-1250
Oct 3 16:15:44 Desktop kernel: [ 649.413134] usblp0: removed
Oct 3 16:15:56 Desktop kernel: [ 661.948056] usb 2-1: reset full-speed USB
device number 3 using uhci_hcd
Oct 3 16:15:56 Desktop kernel: [ 662.068030] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:15:56 Desktop kernel: [ 662.292056] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:15:57 Desktop kernel: [ 662.508047] usb 2-1: reset full-speed USB
device number 3 using uhci_hcd
Oct 3 16:15:57 Desktop kernel: [ 662.628057] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:15:57 Desktop kernel: [ 662.856039] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:15:57 Desktop kernel: [ 663.072037] usb 2-1: reset full-speed USB
device number 3 using uhci_hcd
Oct 3 16:15:58 Desktop kernel: [ 663.480070] usb 2-1: device not accepting
address 3, error -71
Oct 3 16:15:58 Desktop kernel: [ 663.592046] usb 2-1: reset full-speed USB
device number 3 using uhci_hcd
Oct 3 16:15:58 Desktop kernel: [ 664.000046] usb 2-1: device not accepting
address 3, error -71
Oct 3 16:15:58 Desktop kernel: [ 664.000267] usb 2-1: USB disconnect, device
number 3
Oct 3 16:15:58 Desktop udev-configure-printer: remove
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 16:15:58 Desktop udev-configure-printer: URI of detected printer:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 16:15:58 Desktop udev-configure-printer: URI of print queue:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 16:15:58 Desktop udev-configure-printer: Queue
ipp://localhost:631/printers/Samsung-ML-1250 has matching device URI
Oct 3 16:15:58 Desktop udev-configure-printer: Disabled printer
ipp://localhost:631/printers/Samsung-ML-1250 as the corresponding device was
unplugged or turned off
Oct 3 16:15:58 Desktop kernel: [ 664.112044] usb 2-1: new full-speed USB
device number 4 using uhci_hcd
Oct 3 16:15:59 Desktop kernel: [ 664.300593] usb 2-1: New USB device found,
idVendor=04e8, idProduct=300e
Oct 3 16:15:59 Desktop kernel: [ 664.300601] usb 2-1: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
Oct 3 16:15:59 Desktop kernel: [ 664.300605] usb 2-1: Product: Samsung Laser
Printer ML-1250
Oct 3 16:15:59 Desktop kernel: [ 664.300608] usb 2-1: Manufacturer: Samsung
Electronics Co., Ltd.
Oct 3 16:15:59 Desktop kernel: [ 664.307840] usblp 2-1:1.0: usblp0: USB
Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300E
Oct 3 16:15:59 Desktop mtp-probe: checking bus 2, device 4:
"/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1"
Oct 3 16:15:59 Desktop mtp-probe: bus: 2, device: 4 was not an MTP device
Oct 3 16:15:59 Desktop udev-configure-printer: add
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 16:15:59 Desktop udev-configure-printer: device devpath is
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 16:15:59 Desktop udev-configure-printer: MFG:Samsung MDL:ML-1250 SERN:-
serial:-
Oct 3 16:16:00 Desktop kernel: [ 665.437252] usblp0: removed
Oct 3 16:16:00 Desktop kernel: [ 665.448700] usblp 2-1:1.0: usblp0: USB
Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300E
Oct 3 16:16:00 Desktop hp[2111]: io/hpmud/pp.c 627: unable to read device-id
ret=-1
Oct 3 16:16:00 Desktop python: io/hpmud/pp.c 627: unable to read device-id
ret=-1
Oct 3 16:16:00 Desktop udev-configure-printer: URI matches without serial
number: usb://Samsung/ML-1250
Oct 3 16:16:00 Desktop udev-configure-printer: No serial number URI matches so
using those without
Oct 3 16:16:00 Desktop udev-configure-printer: URI of detected printer:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 16:16:00 Desktop udev-configure-printer: URI of print queue:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 16:16:00 Desktop udev-configure-printer: Queue
ipp://localhost:631/printers/Samsung-ML-1250 has matching device URI
Oct 3 16:16:00 Desktop udev-configure-printer: Re-enabled printer
ipp://localhost:631/printers/Samsung-ML-1250
Oct 3 16:16:24 Desktop kernel: [ 689.751370] usblp0: removed
Oct 3 16:16:34 Desktop kernel: [ 699.732038] usb 2-1: reset full-speed USB
device number 4 using uhci_hcd
Oct 3 16:16:34 Desktop kernel: [ 699.852038] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:16:34 Desktop kernel: [ 700.076058] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:16:34 Desktop kernel: [ 700.292046] usb 2-1: reset full-speed USB
device number 4 using uhci_hcd
Oct 3 16:16:35 Desktop kernel: [ 700.412058] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:16:35 Desktop kernel: [ 700.636052] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:16:35 Desktop kernel: [ 700.852047] usb 2-1: reset full-speed USB
device number 4 using uhci_hcd
Oct 3 16:16:35 Desktop kernel: [ 701.260034] usb 2-1: device not accepting
address 4, error -71
Oct 3 16:16:36 Desktop kernel: [ 701.372065] usb 2-1: reset full-speed USB
device number 4 using uhci_hcd
Oct 3 16:16:36 Desktop kernel: [ 701.784044] usb 2-1: device not accepting
address 4, error -71
Oct 3 16:16:36 Desktop kernel: [ 701.784274] usb 2-1: USB disconnect, device
number 4
Oct 3 16:16:36 Desktop udev-configure-printer: remove
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 16:16:36 Desktop udev-configure-printer: URI of detected printer:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 16:16:36 Desktop udev-configure-printer: URI of print queue:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 16:16:36 Desktop udev-configure-printer: Queue
ipp://localhost:631/printers/Samsung-ML-1250 has matching device URI
Oct 3 16:16:36 Desktop udev-configure-printer: Disabled printer
ipp://localhost:631/printers/Samsung-ML-1250 as the corresponding device was
unplugged or turned off
Oct 3 16:16:36 Desktop kernel: [ 701.896051] usb 2-1: new full-speed USB
device number 5 using uhci_hcd
Oct 3 16:16:36 Desktop kernel: [ 702.016045] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:16:36 Desktop kernel: [ 702.240054] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:16:37 Desktop kernel: [ 702.456045] usb 2-1: new full-speed USB
device number 6 using uhci_hcd
Oct 3 16:16:37 Desktop kernel: [ 702.576031] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:16:37 Desktop kernel: [ 702.800052] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:16:37 Desktop kernel: [ 703.016041] usb 2-1: new full-speed USB
device number 7 using uhci_hcd
Oct 3 16:16:38 Desktop kernel: [ 703.424129] usb 2-1: device not accepting
address 7, error -71
Oct 3 16:16:38 Desktop kernel: [ 703.536062] usb 2-1: new full-speed USB
device number 8 using uhci_hcd
Oct 3 16:16:38 Desktop kernel: [ 703.944085] usb 2-1: device not accepting
address 8, error -71
Oct 3 16:16:38 Desktop kernel: [ 703.944126] usb usb2-port1: unable to
enumerate USB device
Oct 3 16:17:01 Desktop CRON[2150]: (root) CMD ( cd / && run-parts --report
/etc/cron.hourly)
$ uname -a
Linux Desktop 4.3.0-040300rc3-generic #201509271225 SMP Sun Sep 27 12:26:47 UTC
2015 x86_64 x86_64 x86_64 GNU/Linux
I booted machine with this kernel but I didn't turned off/on the
printer. So, as was with kernel 3.19, printed didn't done even first job
although lsusb saying it is connected:
$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04e8:300e Samsung Electronics Co., Ltd Laser Printer
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
But syslog output didn't changed from what it was before and after I
sent first job to print:
$ tail -f /var/log/syslog
Oct 3 16:21:49 Desktop dbus[516]: [system] Successfully activated service
'org.freedesktop.UDisks2'
Oct 3 16:21:49 Desktop udisksd[1530]: Acquired the name
org.freedesktop.UDisks2 on the system message bus
Oct 3 16:21:55 Desktop dbus[516]: [system] Activating service
name='org.blueman.Mechanism' (using servicehelper)
Oct 3 16:21:56 Desktop blueman-mechanism: Starting blueman-mechanism
Oct 3 16:21:56 Desktop dbus[516]: [system] Successfully activated service
'org.blueman.Mechanism'
Oct 3 16:21:56 Desktop blueman-mechanism: loading Config
Oct 3 16:21:56 Desktop blueman-mechanism: loading Network
Oct 3 16:21:56 Desktop blueman-mechanism: loading Ppp
Oct 3 16:21:56 Desktop blueman-mechanism: loading RfKill
Oct 3 16:22:26 Desktop blueman-mechanism: Exiting
Again I turned off/on the printer and tried to print. This time it
printed only first job and disconnected again:
Oct 3 16:31:11 Desktop kernel: [ 663.552110] usb 2-1: USB disconnect, device
number 2
Oct 3 16:31:11 Desktop kernel: [ 663.552349] usblp0: removed
Oct 3 16:31:11 Desktop udev-configure-printer: remove
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 16:31:18 Desktop kernel: [ 670.856019] usb 2-1: new full-speed USB
device number 3 using uhci_hcd
Oct 3 16:31:18 Desktop kernel: [ 671.044982] usb 2-1: New USB device found,
idVendor=04e8, idProduct=300e
Oct 3 16:31:18 Desktop kernel: [ 671.044990] usb 2-1: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
Oct 3 16:31:18 Desktop kernel: [ 671.044994] usb 2-1: Product: Samsung Laser
Printer ML-1250
Oct 3 16:31:18 Desktop kernel: [ 671.044997] usb 2-1: Manufacturer: Samsung
Electronics Co., Ltd.
Oct 3 16:31:18 Desktop kernel: [ 671.054046] usblp 2-1:1.0: usblp0: USB
Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300E
Oct 3 16:31:18 Desktop mtp-probe: checking bus 2, device 3:
"/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1"
Oct 3 16:31:18 Desktop mtp-probe: bus: 2, device: 3 was not an MTP device
Oct 3 16:31:18 Desktop udev-configure-printer: add
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 16:31:18 Desktop udev-configure-printer: device devpath is
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 16:31:18 Desktop udev-configure-printer: MFG:Samsung MDL:ML-1250 SERN:-
serial:-
Oct 3 16:31:19 Desktop kernel: [ 672.304425] usblp0: removed
Oct 3 16:31:19 Desktop kernel: [ 672.312051] usblp 2-1:1.0: usblp0: USB
Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300E
Oct 3 16:31:19 Desktop hp[1918]: io/hpmud/pp.c 627: unable to read device-id
ret=-1
Oct 3 16:31:20 Desktop python: io/hpmud/pp.c 627: unable to read device-id
ret=-1
Oct 3 16:31:20 Desktop udev-configure-printer: URI matches without serial
number: usb://Samsung/ML-1250
Oct 3 16:31:20 Desktop udev-configure-printer: No serial number URI matches so
using those without
Oct 3 16:31:20 Desktop udev-configure-printer: URI of detected printer:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 16:31:20 Desktop udev-configure-printer: URI of print queue:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 16:31:20 Desktop udev-configure-printer: Queue
ipp://localhost:631/printers/Samsung-ML-1250 has matching device URI
Oct 3 16:31:20 Desktop udev-configure-printer: Re-enabled printer
ipp://localhost:631/printers/Samsung-ML-1250
Oct 3 16:32:30 Desktop kernel: [ 742.539217] usblp0: removed
Oct 3 16:32:40 Desktop kernel: [ 753.188045] usb 2-1: reset full-speed USB
device number 3 using uhci_hcd
Oct 3 16:32:40 Desktop kernel: [ 753.308027] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:32:41 Desktop kernel: [ 753.532042] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:32:41 Desktop kernel: [ 753.748035] usb 2-1: reset full-speed USB
device number 3 using uhci_hcd
Oct 3 16:32:41 Desktop kernel: [ 753.868023] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:32:41 Desktop kernel: [ 754.092021] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:32:41 Desktop kernel: [ 754.308037] usb 2-1: reset full-speed USB
device number 3 using uhci_hcd
Oct 3 16:32:42 Desktop kernel: [ 754.720025] usb 2-1: device not accepting
address 3, error -71
Oct 3 16:32:42 Desktop kernel: [ 754.832027] usb 2-1: reset full-speed USB
device number 3 using uhci_hcd
Oct 3 16:32:42 Desktop kernel: [ 755.240021] usb 2-1: device not accepting
address 3, error -71
Oct 3 16:32:42 Desktop kernel: [ 755.240103] usb 2-1: USB disconnect, device
number 3
Oct 3 16:32:42 Desktop udev-configure-printer: remove
/devices/pci0000:00/0000:00:1d.0/usb2/2-1
Oct 3 16:32:42 Desktop udev-configure-printer: URI of detected printer:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 16:32:42 Desktop udev-configure-printer: URI of print queue:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Oct 3 16:32:42 Desktop udev-configure-printer: Queue
ipp://localhost:631/printers/Samsung-ML-1250 has matching device URI
Oct 3 16:32:42 Desktop udev-configure-printer: Disabled printer
ipp://localhost:631/printers/Samsung-ML-1250 as the corresponding device was
unplugged or turned off
Oct 3 16:32:42 Desktop kernel: [ 755.352035] usb 2-1: new full-speed USB
device number 4 using uhci_hcd
Oct 3 16:32:43 Desktop kernel: [ 755.472031] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:32:43 Desktop kernel: [ 755.696022] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:32:43 Desktop kernel: [ 755.912030] usb 2-1: new full-speed USB
device number 5 using uhci_hcd
Oct 3 16:32:43 Desktop kernel: [ 756.032042] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:32:43 Desktop kernel: [ 756.256039] usb 2-1: device descriptor
read/64, error -71
Oct 3 16:32:44 Desktop kernel: [ 756.472033] usb 2-1: new full-speed USB
device number 6 using uhci_hcd
Oct 3 16:32:44 Desktop kernel: [ 756.880023] usb 2-1: device not accepting
address 6, error -71
Oct 3 16:32:44 Desktop kernel: [ 756.992034] usb 2-1: new full-speed USB
device number 7 using uhci_hcd
Oct 3 16:32:44 Desktop kernel: [ 757.400041] usb 2-1: device not accepting
address 7, error -71
Oct 3 16:32:44 Desktop kernel: [ 757.400089] usb usb2-port1: unable to
enumerate USB device
Conclusion. I don't understand what's happening with this printer. Turning off
USB-reattaching helps but not too much. No we can print mo jobs until printer
will disconnect. Could the issue be in printer hardware? Some time ago it was
broken and then repeared at the service center. So the only idea I have is to
check it with windows computer. Any other suggestions?
Thanks.
P.S. So using /usr/share/cups/usb/org.cups.usb-quirks now is not
necessary as I understood.
** Changed in: linux (Ubuntu)
Status: Incomplete => New
** Changed in: cups (Ubuntu)
Status: Incomplete => New
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1495971
Title:
Samsung ML-1250 prints only first job and then disconnects
Status in cups package in Ubuntu:
New
Status in linux package in Ubuntu:
Confirmed
Bug description:
We have:
lsusb
Bus 004 Device 009: ID 04e8:300e Samsung Electronics Co., Ltd Laser Printer
Just connected printer and started to print first job:
tail -f /var/log/syslog
Sep 15 14:50:18 desktop udev-configure-printer: URI matches without serial
number: usb://Samsung/ML-1250
Sep 15 14:50:18 desktop udev-configure-printer: No serial number URI matches
so using those without
Sep 15 14:50:18 desktop udev-configure-printer: URI of detected printer:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Sep 15 14:50:18 desktop udev-configure-printer: URI of print queue:
usb://HP/LaserJet%201200?serial=00CNCF203187, normalized: laserjet 1200 serial
00cncf203187
Sep 15 14:50:18 desktop udev-configure-printer: About to add queue for
usb://Samsung/ML-1250
Sep 15 14:50:20 desktop udev-add-printer: add_queue:
URIs=['usb://Samsung/ML-1250']
Sep 15 14:50:20 desktop udev-add-printer: D-Bus method call failed:
org.freedesktop.DBus.Error.ServiceUnknown: The name
com.redhat.NewPrinterNotification was not provided by any .service files
Sep 15 14:50:23 desktop udev-add-printer: PPD:
foomatic-db-compressed-ppds:0/ppd/foomatic-ppd/Samsung-ML-1250-pxlmono.ppd;
Status: 0
Sep 15 14:50:24 desktop colord: Profile added: ML-1250-Gray..
Sep 15 14:50:24 desktop colord: Device added: cups-ML-1250
Sep 15 14:53:51 desktop kernel: [22676.268686] usblp0: removed
Sep 15 14:54:03 desktop kernel: [22688.117044] usblp 4-2:1.0: usblp0: USB
Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300E
Sep 15 14:54:03 desktop kernel: [22688.117121] usblp0: removed
Sep 15 14:54:03 desktop kernel: [22688.228040] usb 4-2: reset full-speed USB
device number 4 using uhci_hcd
Sep 15 14:54:03 desktop kernel: [22688.348039] usb 4-2: device descriptor
read/64, error -71
Sep 15 14:54:03 desktop kernel: [22688.572040] usb 4-2: device descriptor
read/64, error -71
Sep 15 14:54:04 desktop kernel: [22688.788044] usb 4-2: reset full-speed USB
device number 4 using uhci_hcd
Sep 15 14:54:04 desktop kernel: [22688.908039] usb 4-2: device descriptor
read/64, error -71
Sep 15 14:54:04 desktop kernel: [22689.132029] usb 4-2: device descriptor
read/64, error -71
Sep 15 14:54:04 desktop kernel: [22689.348038] usb 4-2: reset full-speed USB
device number 4 using uhci_hcd
Sep 15 14:54:05 desktop kernel: [22689.756029] usb 4-2: device not accepting
address 4, error -71
Sep 15 14:54:05 desktop kernel: [22689.868029] usb 4-2: reset full-speed USB
device number 4 using uhci_hcd
Sep 15 14:54:05 desktop kernel: [22690.276040] usb 4-2: device not accepting
address 4, error -71
Sep 15 14:54:05 desktop kernel: [22690.276130] usblp: can't set desired
altsetting 0 on interface 0
Sep 15 14:54:05 desktop kernel: [22690.276265] usb 4-2: USB disconnect,
device number 4
Sep 15 14:54:05 desktop udev-configure-printer: remove
/devices/pci0000:00/0000:00:1a.1/usb4/4-2
Sep 15 14:54:05 desktop udev-configure-printer: URI of detected printer:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Sep 15 14:54:05 desktop udev-configure-printer: URI of print queue:
usb://HP/LaserJet%201200?serial=00CNCF203187, normalized: laserjet 1200 serial
00cncf203187
Sep 15 14:54:05 desktop udev-configure-printer: URI of print queue:
usb://Samsung/ML-1250, normalized: samsung ml 1250
Sep 15 14:54:05 desktop udev-configure-printer: Queue
ipp://localhost:631/printers/ML-1250 has matching device URI
Sep 15 14:54:05 desktop udev-configure-printer: Disabled printer
ipp://localhost:631/printers/ML-1250 as the corresponding device was unplugged
or turned off
Sep 15 14:54:05 desktop kernel: [22690.388029] usb 4-2: new full-speed USB
device number 5 using uhci_hcd
Sep 15 14:54:05 desktop kernel: [22690.508023] usb 4-2: device descriptor
read/64, error -71
Sep 15 14:54:06 desktop kernel: [22690.732024] usb 4-2: device descriptor
read/64, error -71
Sep 15 14:54:06 desktop kernel: [22690.948037] usb 4-2: new full-speed USB
device number 6 using uhci_hcd
Sep 15 14:54:06 desktop kernel: [22691.068035] usb 4-2: device descriptor
read/64, error -71
Sep 15 14:54:06 desktop kernel: [22691.292039] usb 4-2: device descriptor
read/64, error -71
Sep 15 14:54:06 desktop kernel: [22691.508031] usb 4-2: new full-speed USB
device number 7 using uhci_hcd
Sep 15 14:54:07 desktop kernel: [22691.916031] usb 4-2: device not accepting
address 7, error -71
Sep 15 14:54:07 desktop kernel: [22692.028039] usb 4-2: new full-speed USB
device number 8 using uhci_hcd
Sep 15 14:54:07 desktop kernel: [22692.436036] usb 4-2: device not accepting
address 8, error -71
Sep 15 14:54:07 desktop kernel: [22692.436071] usb usb4-port2: unable to
enumerate USB device
Sep 15 14:55:01 desktop CRON[6650]: (master) CMD (~/temp/ipv6save)
Sep 15 14:55:04 desktop CRON[6649]: (CRON) info (No MTA installed, discarding
output)
So as we see it prints first job and then disconnects for some unknown
reason. lsusb also confirms it:
lsusb
Bus 002 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 Card
Reader Controller
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
The only workaround is to turn off and on the printer. I've checked it
on two different desktops with the same result. Also I've tried
another cable but it not helped.
Some additional info:
Kubuntu/Xubuntu 14.04.3 LTS
Linux 3.19.0-28 x86_64
Tried Samsung ML-1250 Foomatic/pxlmono recommended driver
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: udev 204-5ubuntu20.13
ProcVersionSignature: Ubuntu 3.19.0-28.30~14.04.1-generic 3.19.8-ckt5
Uname: Linux 3.19.0-28-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.13
Architecture: amd64
CurrentDesktop: KDE
CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order
/var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission
denied
CustomUdevRuleFiles: 60-ssd-scheduler.rules
Date: Tue Sep 15 15:12:00 2015
InstallationDate: Installed on 2014-04-01 (531 days ago)
InstallationMedia: Kubuntu 14.04 LTS "Trusty Tahr" - Daily amd64 (20140331)
MachineType: Hewlett-Packard HP Compaq dc7800p Small Form Factor
ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-28-generic
root=UUID=a8420fcb-26e9-480c-8cb0-7d33d308db8c ro rootflags=subvol=@ quiet
splash vt.handoff=7
SourcePackage: systemd
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 07/21/2011
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: 786F1 v01.32
dmi.board.asset.tag: CZC81123H7
dmi.board.name: 0AA8h
dmi.board.vendor: Hewlett-Packard
dmi.chassis.asset.tag: CZC81123H7
dmi.chassis.type: 4
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias:
dmi:bvnHewlett-Packard:bvr786F1v01.32:bd07/21/2011:svnHewlett-Packard:pnHPCompaqdc7800pSmallFormFactor:pvr:rvnHewlett-Packard:rn0AA8h:rvr:cvnHewlett-Packard:ct4:cvr:
dmi.product.name: HP Compaq dc7800p Small Form Factor
dmi.sys.vendor: Hewlett-Packard
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1495971/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
