hello,
i am currently using kea for a management network of NIDs in a SP
environment and was wondering if what i am looking to do is possible.
we have nodes in different physical locations that will be have multiple
Access layer devices for these NIDs to connect to.
currently i have this setup that works for my four devices per node (cisco
routers) that are using VRRP and layer 2 trunking to then share one IP which
i need to be sent as the default route to the NIDs which is 10.18.0.254...
"subnet4": [
{
// test same node but all access devices sharing the same IP
"subnet": "10.18.0.0/24",
"pools": [
{
"pool": "10.18.0.1 - 10.18.0.247",
"option-data":[
{
"name":"routers",
"data":"10.18.0.254"
}
]
}
]
},
what I would like to do is instead have the node devices each use their own
IPs so i can remove the layer2 trunking and VRRP. to accomplish this i
attemped the following:
{
// test same node but access devices have different IPs and NIDs
are getting multiple defaults at once
"subnet": "10.18.0.0/24",
"pools": [
{
"pool": "10.18.0.1 - 10.18.1.247",
"option-data":[
{
"name":"routers",
"data":"10.18.1.254,10.18.1.253,10.18.1.252"
}
]
}
]
},
what i was hoping to accomplish with this is that every NID would get
multiple default routes and then could use whatever worked... high hope that
did not work.
so what i am wondering now is i can specify a specific IP as the subnet to
which the default router will correspond and then share a pool between them.
something like this:
{
// test same node but access devices with different IPs are separate to
get correct default but share pools
"subnet": "10.18.0.254/24,
"pools": [
{
"pool": "10.18.0.1 - 10.18.0.250",
"option-data":[
{
"name":"routers",
"data":"10.18.0.254"
}
]
}
]
},
{
// test same node but access devices with different IPs are separate to
get correct default but share pools
"subnet": "10.18.0.253/24",
"pools": [
{
"pool": "10.18.0.1 - 10.18.0.250",
"option-data":[
{
"name":"routers",
"data":"10.18.0.253"
}
]
}
]
},
{
// test same node but access devices with different IPs are separate to
get correct default but share pools
"subnet": "10.18.0.252/24",
"pools": [
{
"pool": "10.18.0.1 - 10.18.0.250",
"option-data":[
{
"name":"routers",
"data":"10.18.0.252"
}
]
}
]
},
let me know if anyone has attempted this or has any suggestions
thanks
--
Sent from: http://kea-users.7364.n8.nabble.com/
_______________________________________________
ISC funds the development of this software with paid support subscriptions.
Contact us at https://www.isc.org/contact/ for more information.
To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users.
Kea-users mailing list
[email protected]
https://lists.isc.org/mailman/listinfo/kea-users
