On 5/11/20 4:10 PM, Brian Hechinger wrote:
>
> It never gets to the switch in the first place. Watching tcpdump on the dhcp
> server I only see the requests coming in but never sending anything out.
>
That's what I figured but wanted to be sure.
>
> Traceroute doesn't work oddly enough. It just times out.
>
That can be typical in some networks as a lot of firewalls drop ICMP packets by
default.
>> - How is Kea's interfaces-config map configured in kea-dhcp4.conf?
>
> "interfaces-config": {
> "interfaces": [ "*" ],
> "dhcp-socket-type": "udp"
> },
AFAIK everything looks fine. Can't give you an definitive answer as to why when
Kea sends a packet the OS thinks the host has no route:
- Could be a firewall or security context issue. Check IPTables, AppArmor,
SELinux, etc.
- As a test you could try changing to raw sockets (remove "dhcp-socket-type":
"udp"). If that does work I'm not sure why it would as it's a relayed request.
- Force Kea to use the kernel routing table by adding "outbound-interface":
"use-routing" to the configuration (after re-adding "dhcp-socket-type": "udp"
back to the config).
--
Thanks,
Joshua Schaeffer
_______________________________________________
Kea-users mailing list
[email protected]
https://lists.isc.org/mailman/listinfo/kea-users
