https://bugs.kde.org/show_bug.cgi?id=490484
--- Comment #65 from Mitch Rauth <mi...@rauth.at> ---
Hi Gilles,
here are the results from the smartmontools. Looks quite normal to me.
C:\Program Files\smartmontools\bin>smartctl.exe -a /dev/sda
smartctl 7.4 2023-08-01 r5530 [x86_64-w64-mingw32-w10-22H2] (sf-7.4-1)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TEAM T253X6001T
Serial Number: TPBF2110010011300722
LU WWN Device Id: 0 000000 000000000
Firmware Version: SBFMJ1.3
User Capacity: 1.024.209.543.168 bytes [1,02 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jul 27 16:52:19 2024 MS
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (65535) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always
- 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always
- 13755
12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always
- 405
168 Unknown_Attribute 0x0012 100 100 000 Old_age Always
- 0
170 Unknown_Attribute 0x0003 081 081 010 Pre-fail Always
- 283
173 Unknown_Attribute 0x0012 100 100 000 Old_age Always
- 4128863
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always
- 15
194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always
- 33 (Min/Max 33/33)
218 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always
- 1
231 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always
- 93
241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always
- 13237
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Conveyance offline Completed without error 00% 13755 -
# 2 Extended offline Completed without error 00% 13754 -
# 3 Extended offline Completed without error 00% 13750 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been
run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
The above only provides legacy SMART information - try 'smartctl -x' for more
C:\Program Files\smartmontools\bin>
--
You are receiving this mail because:
You are watching all bug changes.
