https://bugs.kde.org/show_bug.cgi?id=511145
Bug ID: 511145
Summary: Add support in the GUI for multiple wired connection
Classification: I don't know
Product: kde
Version First unspecified
Reported In:
Platform: Debian testing
OS: Linux
Status: REPORTED
Severity: normal
Priority: NOR
Component: general
Assignee: [email protected]
Reporter: [email protected]
Target Milestone: ---
Hello, I hope I'm reporting a bug to the correct component, if not, please move
it where it is appropriate.
SUMMARY
STEPS TO REPRODUCE
1. Connect PC to network via cable
2. try to configure a second wired connection
OBSERVED RESULT
It is not possible to activate more than one wired connection at the same time
EXPECTED RESULT
It should be possible to activate more than one wired connection at the same
time
SOFTWARE/OS VERSIONS
Operating System: Debian GNU/Linux 13
KDE Plasma Version: 6.3.6
KDE Frameworks Version: 6.13.0
Qt Version: 6.8.2
Kernel Version: 6.12.48+deb13-amd64 (64-bit)
Graphics Platform: Wayland
ADDITIONAL INFORMATION
My PC is connected to the network via cable, this is managed by KDE Plasma
without issues.
I also have a reMarkable; a device that when connected to the PC, is recognized
as an additional wired connection, and the device is reachable at a specific ip
address.
The output of "ip a", after attaching the device is the following
----
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: enp57s0f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state
UP group default qlen 1000
link/ether 80:fa:5b:69:6c:40 brd ff:ff:ff:ff:ff:ff
altname enx80fa5b696c40
inet 192.168.178.121/24 brd 192.168.178.255 scope global dynamic
noprefixroute enp57s0f1
valid_lft 845353sec preferred_lft 845353sec
inet6 fe80::82fa:5bff:fe69:6c40/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: wlp58s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
link/ether ce:c4:fe:fd:52:76 brd ff:ff:ff:ff:ff:ff permaddr
3c:6a:a7:1b:d8:ca
altname wlx3c6aa71bd8ca
6: enxf2868cb519fc: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
state UP group default qlen 1000
link/ether f2:86:8c:b5:19:fc brd ff:ff:ff:ff:ff:ff
----
If I connect to enxf2868cb519fc, my device, from the KDE Network settings, then
the connection to enp57s0f1 is dropped.
Apparently it is not possible to activate both connections from KDE.
My current workaround is to open a console and execute "dhcpcd" as
administrator, after a moment both connections are active, and also shown as
such from the KDE Plasma settings.
--
You are receiving this mail because:
You are watching all bug changes.
