Sorry Rob I can't get the text to be organized properly.
I'll try again. Hi Rob, thank you for your quick response. Currently I have 1 INA3221 board left so I can still test. I now use the library of Rob Tillaart "INA3221_RT" #include "INA3221.h" INA3221 INA(0x40); And the commands for initialization and default setup. INA.begin(); ch = 0 to 2 U = INA.getBusVoltage(ch); I = INA.getCurrent_mA(ch); I hope this is enough info, Thank you very much for the effort. kind regards, Bill. On Sunday, August 10, 2025 at 11:45:44 AM UTC+2 Bill Beek wrote: > Hi Rob, thank you for your quick response. > Currently I have 1 INA3221 board left so I can still test. > I now use the library of Rob Tillaart "INA3221_RT" > #include "INA3221.h" INA3221 > INA(0x40); > And the commands for initialization and default setup. > INA.begin(); > ch = 0 to 2 > U = INA.getBusVoltage(ch); > I = INA.getCurrent_mA(ch); > I hope this is enough info, > Thank you very much for the effort. kind regards, Bill. > > > On Saturday, August 9, 2025 at 8:05:05 PM UTC+2 Rob CJ wrote: > >> Hi Bill, >> >> What I could do is only implement the functions you are using instead of >> porting all functions. That would save time. I do not have such a device >> so I cannot test it so if I have something you become the tester 🙂. >> >> Can you tell me which Arduino functions you use from this library? >> >> Kind regards, >> >> Rob >> >> >> >> ------------------------------ >> *Van:* [email protected] <[email protected]> namens Bill >> Beek <[email protected]> >> *Verzonden:* zaterdag 9 augustus 2025 19:49 >> *Aan:* jallib <[email protected]> >> *Onderwerp:* Re: [jallib] INA3221 board >> >> Hi Rob, >> TNX for your replay, >> I looked at it and found it too complicated to implement all the >> functions. By the way, I only use the Volt and Amp functions. So far I use >> an Arduino Nano and the INA3221 in a triple output power supply . But I >> like JAL much more. >> >> On Saturday, August 9, 2025 at 7:01:01 PM UTC+2 Rob CJ wrote: >> >> Hi Bill, >> >> Let's hope that somebody created something for JAL that can be turned >> into a JAL library. >> >> I had a quick look at the Arduino library and it seems to be a number of >> small but readable functions and 'only' about 500 lines of source code so >> it seems douable to make a JAL library out of it. How far did you get >> porting it? >> >> Kind regards, >> >> Rob >> >> >> >> ------------------------------ >> *Van:* [email protected] <[email protected]> namens Bill >> Beek <[email protected]> >> *Verzonden:* vrijdag 8 augustus 2025 20:21 >> *Aan:* jallib <[email protected]> >> *Onderwerp:* [jallib] INA3221 board >> >> Hi all, is there anyone who has made a library for the INA3221 >> Three-Channel Shunt Current and Supply Voltage Monitor module (I2C)? I've >> been looking at the arduino lib to convert it to a JAL lib, but it's a bit >> too complicated for me. Greetings, Bill >> >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion visit >> https://groups.google.com/d/msgid/jallib/d1457069-00f6-4edf-9e52-2ca8078b25b5n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/jallib/d1457069-00f6-4edf-9e52-2ca8078b25b5n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion visit >> https://groups.google.com/d/msgid/jallib/59fb5bce-a58a-4e0b-ae12-441bb1b3e0f7n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/jallib/59fb5bce-a58a-4e0b-ae12-441bb1b3e0f7n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/jallib/0b07cd1d-a2f2-43fb-9c05-370cdc0e13d2n%40googlegroups.com.
