Hi Patrick,

On Mon, May 11, 2015 at 4:49 PM, Patrick Ohly <[email protected]>
wrote:

> On Mon, 2015-05-11 at 15:55 +0300, Vitaly Chernooky wrote:
> > Hi Leon,
> >
> > On Fri, May 8, 2015 at 4:32 PM, Leon Anavi <[email protected]>
> > wrote:
> >         Hi Pedro,
> >
> >         On 8.05.2015 14:59, [email protected] wrote:
> >                 Hi all,
> >                 I have started an attempt to build tizen ivi for the
> >                 Renesas R-Car M2 ARM platform (Koelsch board), one of
> >                 the goals would be to attempt graphics hw acceleration
> >                 with the proprietary drivers.
> >                 There are some instructions available in the wiki
> >                 regarding using gbs. Nevertheless I wonder whether
> >                 someone did or is in the process going the same using
> >                 yocto?
> >
> >         Building Tizen:Common or any of the Tizen profiles based on it
> >         (like IVI) for ARM using Yocto isn't easy task. In my opinion
> >         the Yocto recipes are not perfect and you will have numerous
> >         challenges if you try to build them for any devices with CPU
> >         different from Intel.
> >
> >
> > I have different opinion on it. According to my experience with Yocto,
> > it is much more easier to build for ARM with Yocto than with gbs ;)
>
> The comment was about the "Tizen on Yocto" recipes, not Yocto. The
> recipes have issues that you don't see when building recipes manually
> written for Yocto.
>
> These recipes get converted from .spec files to .bb files based on the
> build configuration for x86. All architecture specific tweaks in Tizen
> get lost at that point and have to be added back manually to the
> generated .bb files.
>
> The spec2yocto conversion tool also does not have enough information
> available in the .spec files about dependencies (is a tool needed or
> something to link against?) and has to use heuristics, which fail in
> some cases when doing cross-compilation.
>

It looks like you have skipped my announce of successful building of "Tizen
IVI on Yocto" for ARM-based board DRA7XX. And as far as I recall Leon have
used few my recipes changes in his buildings. It was the reason why I
expected than Leon would understand me :)

With best regards,


> --
> Best Regards, Patrick Ohly
>
> The content of this message is my personal opinion only and although
> I am an employee of Intel, the statements I make here in no way
> represent Intel's position on the issue, nor am I authorized to speak
> on behalf of Intel on this matter.
>
>
>
>


-- 
*Vitaly Chernooky | Senior Developer - Product Engineering and Development*
GlobalLogic
P *+380.44.4929695 ext.1136* M *+380.63.6011802* S cvv_2k
www.globallogic.com

http://www.globallogic.com/email_disclaimer.txt
_______________________________________________
IVI mailing list
[email protected]
https://lists.tizen.org/listinfo/ivi

Reply via email to