Please help me fix this... I am building this custom probe but the strip chart
doesn't show new values. Hope somebody could able to help me... thanks in
advance.
<header>
type = "custom-snmp"
package = "com.alpha-horizons"
probe_name = "snmp.alpha-horizons.MOT-DC-HUMID-TH02"
human_name = "MOT-DC-HUMID-TH02"
display_name = "Alpha Horizons/Environment/MOT-DC-HUMID-TH02"
version = "1.0"
address_type = "IP"
port_number = "161"
flags = "NOICMPFALLBACK,NOLINKS,MINIMAL"
poll_interval = "10"
</header>
<snmp-device-properties>
nomib2 = "true"
maxvars = "5"
pdutype = "get-request"
</snmp-device-properties>
<parameters>
"C_HiCrit" = "60"
"C_HiAlrm" = "50"
"C_Normal" = "20"
"C_LoAlrm" = "19"
"C_LoCrit" = "5"
</parameters>
<snmp-device-variables>
SensorName, 1.3.6.1.4.1.3052.17.1.1.1.1.4.12.3.1, DEFAULT
Event_State, 1.3.6.1.4.1.3052.17.1.1.1.1.5.12.3.1, DEFAULT
Value_Int, 1.3.6.1.4.1.3052.17.1.1.1.1.6.12.3.1, DEFAULT
Value_Str, 1.3.6.1.4.1.3052.17.1.1.1.1.7.12.3.1, DEFAULT
Alias_Value_Str, 1.3.6.1.4.1.3052.17.1.1.1.1.10.12.3.1, DEFAULT
</snmp-device-variables>
<snmp-device-thresholds>
critical: ( $Value_Int > ${C_HiCrit} ) "$Alias_Value_Str - Humidity is Very
High"
alarm: ( $Value_Int > ${C_HiAlrm} ) "$Alias_Value_Str - Humidity is High"
okay: ( $Value_Int > ${C_Normal} ) "$Alias_Value_Str - Humidity is Normal"
alarm: ( $Value_Int < ${C_LoAlrm} ) "$Alias_Value_Str - Humidity is Low"
critical: ( $Value_Int < ${C_LoCrit} ) "$Alias_Value_Str - Humidity is Very
Low"
</snmp-device-thresholds>
<snmp-device-display>
\P0\
\B\Temperature Sensor\P0\
${SensorName} ${chartable:${Value_Int}} %\P0\
</snmp-device-display>
-------------------- m2f --------------------
Read this topic online here:
http://forums.intermapper.com/viewtopic.php?p=4428#4428
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
