Note: I took out support@ so it does not generate an extra ticket.
Second that.
The only question is, say, Cat4509 full of 48port cards. Do you want 200
charts - one per interface? I don't, plus I don't need to know what's going
on on those interfaces anyway most of the time.
I noticed that CPU history is collected anyway (even if you don't setup a
chart for it). Maybe it's a feature of the DB, because, I know that that was
not happening before (v4...).
Also, in case of CPU, I usually gather most important CPU counters on one
chart to save on screen space and for trend observation, etc...
I'd say, in the right click menu, it would be useful to have a "generate
charts" option and to have a sub-menu where one could select what to
generate:
I see something like:
Generate Charts --->|-All Counters (including all interfaces)
|-Routed Interfaces
|-Unnumbered Interfaces
|-CPU
|-Memory Usage (Used with Total set for upper limit)
|-Disk/Flash Usage (Used with Total set for upper limit)
That is what I can think of the top of my head. Or maybe analyze the probe
for 'chartable counters' and dump them into that submenu. That would be
nice.
PS. I hope my 'menu' keeps it's formatting properly.
__________________________________________________________
Andrey Gordon | Integrity Interactive | Network Engineer | +1.781.398.3518
> From: Manickaraja Arumugam <[EMAIL PROTECTED]>
> Reply-To: InterMapper Discussion <[email protected]>
> Date: Wed, 29 Oct 2008 15:56:48 +0530
> To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
> Cc: InterMapper Discussion <[email protected]>
> Subject: [IM-Talk] New Feature request
>
> Hi Dartware,
>
>
> 1. Automatic creation of charts while adding the device to the
> Intermapper.
>
> a. What are the information can be created while adding eq. CPU, Memory,
> Flash/Disk and Interface (bandwidth mbps, utilization %, errors/Discards on
> the selected interfaces)
> Why I need this feature?
> It will reduce lots of our time and manual error to create and name the
> charts for each device. Please assume how much difficult would be and time
> consuming activity needed for creating 400 more devices.
>
> 2. I need able to view and click the belonging chart's from the device
> icon.
>
> a. This could be possible if I do right click the device icon it should
> list the charts it belonging to like CPU, memory, interface and custom charts.
>
> Why I need this feature?
>
> Already we have crossed around 400 devices, viewing and finding these charts
> say (approx 500 device X 6 charts = 3000 charts) This also saves lots of our
> time.
>
>
> Hi All,
>
> Please share your views also.
>
>
> Regards
>
> Manicka Raja A
> Assistant Manager - Corporate IT
>
> A R I C E N T
> ESPEE IT Park
> Plot-5, Jawaharlal Nehru Salai,
> Ekkattuthangal,
> Chennai - 600 097 India
> Main +9 144.442.2667 7
> Fax +9 144.442.2610 0
> Mobile +9 199.400.1130 8
> Voip +6 666.520.6677
>
>
>
> ________________________________
> "DISCLAIMER: This message is proprietary to Aricent and is intended solely for
> the use of the individual to whom it is addressed. It may contain privileged
> or confidential information and should not be circulated or used for any
> purpose other than for what it is intended. If you have received this message
> in error,please notify the originator immediately. If you are not the intended
> recipient, you are notified that you are strictly prohibited from using,
> copying, altering, or disclosing the contents of this message. Aricent accepts
> no responsibility for loss or damage arising from the use of the information
> transmitted by this email including damage from virus."
> ____________________________________________________________________
> List archives:
> http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
> To unsubscribe: send email to: [EMAIL PROTECTED]
>
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
