I have try to replace the bundle id directly into the .plist:
<key>CFBundleIdentifier</key>
<string>$(PRODUCT_BUNDLE_IDENTIFIER)</string>
by
<key>CFBundleIdentifier</key>
<string>ca.amotus.NubtisuApp</string>
But the resulting xcode project is still got replaced by
com.yourcompany.NubitusApp, now that is strange, so the .pro value have no
impact and something is just kind of replacing the value to this
com.yourcompany.(Application Name). If I open the xcodeproject I can see that
replaced value. I have no idea where it’s coming from. Anybody have an idea for
this?
From: Boris Ralchenko <bralche...@ics.com>
Sent: June 18, 2020 3:09 PM
To: Jérôme Godbout <godbo...@amotus.ca>
Cc: interest@qt-project.org
Subject: Re: [Interest] Building iOS from command line
I do have the bundle ID specified explicitly in the Info.plist.
I prefer Xcode for debugging/packaging. It appears to be more efficient way
when I needed to figure out command line build, less tools to take care of. It
is possible that QtCreator GUI has something that command line tools have not.
<key>CFBundleIcons~ipad</key>
<dict/>
<key>CFBundleIdentifier</key>
<string>com.viewpoint.kiosk</string>
<key>CFBundleInfoDictionaryVersion</key>
<string>6.0</string>
<key>CFBundleName</key>
<string>ViewPoint</string>
<key>CFBundlePackageType</key>
<string>APPL</string>
<key>CFBundleShortVersionString</key>
<string>1.0</string>
<key>CFBundleSignature</key>
<string>com.viewpoint.kiosk</string>
<key>CFBundleVersion</key>
<string>1.0</string>
Regards,
Boris Ralchenko.
On Jun 18, 2020, at 2:58 PM, Jérôme Godbout
<godbo...@amotus.ca<mailto:godbo...@amotus.ca>> wrote:
Hi,
I have an Info.plist that I have into my project. I have the following entry
into my Info.plist file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN"
"http://www.apple.com/DTDs/PropertyList-1.0.dtd";>
<plist version="1.0">
<dict>
<key>CFBundleDisplayName</key>
<string>${PRODUCT_NAME}</string>
<key>CFBundleExecutable</key>
<string>${EXECUTABLE_NAME}</string>
<key>CFBundleGetInfoString</key>
<string>Created by Qt/QMake</string>
<key>CFBundleIdentifier</key>
<string>$(PRODUCT_BUNDLE_IDENTIFIER)</string>
<key>CFBundleName</key>
<string>${PRODUCT_NAME}</string>
<key>CFBundlePackageType</key>
<string>APPL</string>
...
</dict>
From my .pro:
Q_PRODUCT_BUNDLE_IDENTIFIER.value = ca.amotus.NubitusApp
From my ios .pri (I use the same .pri for all iOS application):
DISTFILES += ios/Info.plist
Q_PRODUCT_BUNDLE_IDENTIFIER.name = PRODUCT_BUNDLE_IDENTIFIER
QMAKE_MAC_XCODE_SETTINGS += Q_PRODUCT_BUNDLE_IDENTIFIERQMAKE_INFO_PLIST =
ios/Info.plist
I was guessing the replacement should have happen. or does the above variables
only work when inside QtCreator GUI?
From: Boris Ralchenko <bralche...@ics.com<mailto:bralche...@ics.com>>
Sent: June 18, 2020 2:46 PM
To: Jérôme Godbout <godbo...@amotus.ca<mailto:godbo...@amotus.ca>>
Cc: interest@qt-project.org<mailto:interest@qt-project.org>
Subject: Re: [Interest] Building iOS from command line
Hi Jérôme,
We have a separate Info.plist for command line build, it should solve the
bundle ID issue. I don’t remember exactly the details, it was couple of years
ago. But I did check - there is an Info.plist in the repository. I suspect Qt
Creator generates one too, but I rely on the one from Xcode.
Regards,
Boris Ralchenko.
On Jun 18, 2020, at 2:30 PM, Jérôme Godbout
<godbo...@amotus.ca<mailto:godbo...@amotus.ca>> wrote:
Hi,
I’m trying to build my project from my CI system to generate the .ipa (and stop
releasing by hand over. But I seem to be missing something into my way of doing
it (I managed to do it for Android, armv7/armv8 .apk and .aab). Here is my
steps raw command line steps (not the provisioning, certificate and the
keychain are installed and work with a Xamarin and Unity application with the
same setup, the question is not about those parts).
I’m building on lastest MacOS X, xcode is up to date and Qt 5.15.0
"/Users/Shared/Qt/5.15.0/ios/bin/qmake" Nubitus.pro -spec macx-ios-clang
CONFIG+=release CONFIG+=iphoneos CONFIG+=device CONFIG+=qtquickcompiler -after
make -f Makefile qmake_all
make
The Qmake generate the makefile, make qmake_all work just fine, but the make
build give me the following error:
Xcode couldn't find any iOS App Development provisioning profiles matching
'com.yourcompany.NubitusApp'
but my .pro clearly indicate
Q_PRODUCT_BUNDLE_IDENTIFIER.value = ca.amotus.NubitusApp
When building from inside QtCreator this work and the provisioning is also
working just fine. so my question: Why is the build any different? is QtCreator
doing any extra steps not print into the output? is there any env variables
required for Q_PRODUCT_BUNDLE_IDENTIFIER to be used? Did I miss a step?!
Extra points question: will this generate an .ipa or .app ? How does one
generate a .ipa from the command lines out of the result build by Qt make?
Thanks,
_______________________________________________
Interest mailing list
Interest@qt-project.org<mailto:Interest@qt-project.org>
https://lists.qt-project.org/listinfo/interest
_______________________________________________
Interest mailing list
Interest@qt-project.org
https://lists.qt-project.org/listinfo/interest
