Hi Philippe, I had the same problem. It may be a problem of the x86_64 cross-compiler, indeed, or Qt's configure does not recognize the target platform when I use the cross-compiler of VS 2015. With VS 2013 there was no such problem.
IIRC I solved it by using the 64-bit native compiler. - Michael. > -----Original Message----- > From: interest-bounces+sue=sf.mpg...@qt-project.org [mailto:interest- > bounces+sue=sf.mpg...@qt-project.org] On Behalf Of Philippe > Sent: Saturday, October 17, 2015 12:47 PM > To: interest@qt-project.org > Subject: Re: [Interest] MSVC 2015, configure 64 bit, missing 'arch.exe' > > After 6 hours on the case, I found a solution, but it's a hack... maybe it > can be > be useful to some... > > First of all, the following did not help: reinstalling VC-2015, cleaning > temp folders, multiple rebooting, multiple attempts on a fresh Qt tree. > > Using nmake as you suggested is the way... > But if I run nnake for the 64bit config (x86), it fails indeed, with > this error: > > .\arch.cpp: fatal error C1902: Program database manager mismatch; please > check your installation > > But if I run nnake for the 32bit config (x86), it works. And if I erase the > arch > binaries and then run nnake for the 64bit config (x86_amd64), it now works! > And with the arch.exe prebuilt like this, the rest of configure stge works, > and the full 64 bit Qt can be built later with success... > > So, still a mystery, but I have a solution. > > Philippe > > On Fri, 16 Oct 2015 16:21:40 -0700 > Thiago Macieira <thiago.macie...@intel.com> wrote: > > > On Saturday 17 October 2015 00:26:54 Philippe wrote: > > > I don't have the problem with the 32 bit configure. But with the 64 bit, > > > I always get the following error during configure. Any idea? > > > > > > Running configuration tests... > > > jom: C:\Qt\5.5.1\64\qtbase\config.tests\arch\Makefile [arch.obj] Error 2 > > > Could not find output file 'arch.exe' or 'arch' in > > > C:/Qt/5.5.1/64/qtbase/config. tests/arch : No such file or directory > > > Press any key to continue . . . > > > > Your compiler is probably broken and failed to compile the arch.exe > > executable. > > > > Go into that directory and run nmake. See if it produces a binary. > > > > -- > > Thiago Macieira - thiago.macieira (AT) intel.com > > Software Architect - Intel Open Source Technology Center > > > > _______________________________________________ > > Interest mailing list > > Interest@qt-project.org > > http://lists.qt-project.org/mailman/listinfo/interest > > > _______________________________________________ > Interest mailing list > Interest@qt-project.org > http://lists.qt-project.org/mailman/listinfo/interest _______________________________________________ Interest mailing list Interest@qt-project.org http://lists.qt-project.org/mailman/listinfo/interest
