From: Ville Syrjälä <[email protected]>
Currently we re-read a bunch of static eDP panel caps from the DPCD
over and over again. Let's do it only once to save some time and effort.
v2: Make thing less confusing with intel_edp_init_dpcd() (Chris)
Move no_aux_handshake setup in there as well
v3: Move tps3/rate printout to intel_dp_long_pulse() so that
we'll still get them on eDP as well
Cc: Chris Wilson <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Reviewed-by: Chris Wilson <[email protected]> (v1)
---
drivers/gpu/drm/i915/intel_dp.c | 165 ++++++++++++++++++++++------------------
1 file changed, 89 insertions(+), 76 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1fe9bb745de5..0d8c3c3fccd7 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3395,20 +3395,94 @@ intel_dp_link_down(struct intel_dp *intel_dp)
}
static bool
-intel_dp_get_dpcd(struct intel_dp *intel_dp)
+intel_dp_read_dpcd(struct intel_dp *intel_dp)
{
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = dig_port->base.base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
-
if (drm_dp_dpcd_read(&intel_dp->aux, 0x000, intel_dp->dpcd,
sizeof(intel_dp->dpcd)) < 0)
return false; /* aux transfer failed */
DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd),
intel_dp->dpcd);
- if (intel_dp->dpcd[DP_DPCD_REV] == 0)
- return false; /* DPCD not present */
+ return intel_dp->dpcd[DP_DPCD_REV] != 0;
+}
+
+static bool
+intel_edp_init_dpcd(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv =
+ to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
+
+ /* this function is meant to be called only once */
+ WARN_ON(intel_dp->dpcd[DP_DPCD_REV] != 0);
+
+ if (!intel_dp_read_dpcd(intel_dp))
+ return false;
+
+ if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
+ dev_priv->no_aux_handshake = intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
+ DP_NO_AUX_HANDSHAKE_LINK_TRAINING;
+
+ /* Check if the panel supports PSR */
+ drm_dp_dpcd_read(&intel_dp->aux, DP_PSR_SUPPORT,
+ intel_dp->psr_dpcd,
+ sizeof(intel_dp->psr_dpcd));
+ if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) {
+ dev_priv->psr.sink_support = true;
+ DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
+ }
+
+ if (INTEL_GEN(dev_priv) >= 9 &&
+ (intel_dp->psr_dpcd[0] & DP_PSR2_IS_SUPPORTED)) {
+ uint8_t frame_sync_cap;
+
+ dev_priv->psr.sink_support = true;
+ drm_dp_dpcd_read(&intel_dp->aux,
+ DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
+ &frame_sync_cap, 1);
+ dev_priv->psr.aux_frame_sync = frame_sync_cap ? true : false;
+ /* PSR2 needs frame sync as well */
+ dev_priv->psr.psr2_support = dev_priv->psr.aux_frame_sync;
+ DRM_DEBUG_KMS("PSR2 %s on sink",
+ dev_priv->psr.psr2_support ? "supported" : "not
supported");
+ }
+
+ /* Read the eDP Display control capabilities registers */
+ if ((intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] &
DP_DPCD_DISPLAY_CONTROL_CAPABLE) &&
+ drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV,
+ intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd) ==
+ sizeof(intel_dp->edp_dpcd)))
+ DRM_DEBUG_KMS("EDP DPCD : %*ph\n", (int)
sizeof(intel_dp->edp_dpcd),
+ intel_dp->edp_dpcd);
+
+ /* Intermediate frequency support */
+ if (intel_dp->edp_dpcd[0] >= 0x03) { /* eDp v1.4 or higher */
+ __le16 sink_rates[DP_MAX_SUPPORTED_RATES];
+ int i;
+
+ drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES,
+ sink_rates, sizeof(sink_rates));
+
+ for (i = 0; i < ARRAY_SIZE(sink_rates); i++) {
+ int val = le16_to_cpu(sink_rates[i]);
+
+ if (val == 0)
+ break;
+
+ /* Value read is in kHz while drm clock is saved in
deca-kHz */
+ intel_dp->sink_rates[i] = (val * 200) / 10;
+ }
+ intel_dp->num_sink_rates = i;
+ }
+
+ return true;
+}
+
+
+static bool
+intel_dp_get_dpcd(struct intel_dp *intel_dp)
+{
+ if (!intel_dp_read_dpcd(intel_dp))
+ return false;
if (drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_COUNT,
&intel_dp->sink_count, 1) < 0)
@@ -3431,68 +3505,6 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
if (!is_edp(intel_dp) && !intel_dp->sink_count)
return false;
- /* Check if the panel supports PSR */
- memset(intel_dp->psr_dpcd, 0, sizeof(intel_dp->psr_dpcd));
- if (is_edp(intel_dp)) {
- drm_dp_dpcd_read(&intel_dp->aux, DP_PSR_SUPPORT,
- intel_dp->psr_dpcd,
- sizeof(intel_dp->psr_dpcd));
- if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) {
- dev_priv->psr.sink_support = true;
- DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
- }
-
- if (INTEL_INFO(dev)->gen >= 9 &&
- (intel_dp->psr_dpcd[0] & DP_PSR2_IS_SUPPORTED)) {
- uint8_t frame_sync_cap;
-
- dev_priv->psr.sink_support = true;
- drm_dp_dpcd_read(&intel_dp->aux,
- DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
- &frame_sync_cap, 1);
- dev_priv->psr.aux_frame_sync = frame_sync_cap ? true :
false;
- /* PSR2 needs frame sync as well */
- dev_priv->psr.psr2_support =
dev_priv->psr.aux_frame_sync;
- DRM_DEBUG_KMS("PSR2 %s on sink",
- dev_priv->psr.psr2_support ? "supported" : "not
supported");
- }
-
- /* Read the eDP Display control capabilities registers */
- memset(intel_dp->edp_dpcd, 0, sizeof(intel_dp->edp_dpcd));
- if ((intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] &
DP_DPCD_DISPLAY_CONTROL_CAPABLE) &&
- (drm_dp_dpcd_read(&intel_dp->aux,
DP_EDP_DPCD_REV,
- intel_dp->edp_dpcd,
sizeof(intel_dp->edp_dpcd)) ==
-
sizeof(intel_dp->edp_dpcd)))
- DRM_DEBUG_KMS("EDP DPCD : %*ph\n", (int)
sizeof(intel_dp->edp_dpcd),
- intel_dp->edp_dpcd);
- }
-
- DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",
- yesno(intel_dp_source_supports_hbr2(intel_dp)),
- yesno(drm_dp_tps3_supported(intel_dp->dpcd)));
-
- /* Intermediate frequency support */
- if (is_edp(intel_dp) && (intel_dp->edp_dpcd[0] >= 0x03)) { /* eDp v1.4
or higher */
- __le16 sink_rates[DP_MAX_SUPPORTED_RATES];
- int i;
-
- drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES,
- sink_rates, sizeof(sink_rates));
-
- for (i = 0; i < ARRAY_SIZE(sink_rates); i++) {
- int val = le16_to_cpu(sink_rates[i]);
-
- if (val == 0)
- break;
-
- /* Value read is in kHz while drm clock is saved in
deca-kHz */
- intel_dp->sink_rates[i] = (val * 200) / 10;
- }
- intel_dp->num_sink_rates = i;
- }
-
- intel_dp_print_rates(intel_dp);
-
if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
DP_DWN_STRM_PORT_PRESENT))
return true; /* native DP sink */
@@ -4235,6 +4247,12 @@ intel_dp_long_pulse(struct intel_connector
*intel_connector)
if (intel_encoder->type != INTEL_OUTPUT_EDP)
intel_encoder->type = INTEL_OUTPUT_DP;
+ DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",
+ yesno(intel_dp_source_supports_hbr2(intel_dp)),
+ yesno(drm_dp_tps3_supported(intel_dp->dpcd)));
+
+ intel_dp_print_rates(intel_dp);
+
intel_dp_probe_oui(intel_dp);
ret = intel_dp_probe_mst(intel_dp);
@@ -5396,14 +5414,9 @@ static bool intel_edp_init_connector(struct intel_dp
*intel_dp,
pps_unlock(intel_dp);
/* Cache DPCD and EDID for edp. */
- has_dpcd = intel_dp_get_dpcd(intel_dp);
+ has_dpcd = intel_edp_init_dpcd(intel_dp);
- if (has_dpcd) {
- if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
- dev_priv->no_aux_handshake =
- intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
- DP_NO_AUX_HANDSHAKE_LINK_TRAINING;
- } else {
+ if (!has_dpcd) {
/* if this fails, presume the device is a ghost */
DRM_INFO("failed to retrieve link info, disabling eDP\n");
goto out_vdd_off;
--
2.7.4
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
