On Mon, 04 Apr 2016, Ville Syrjälä <[email protected]> wrote:
> On Fri, Mar 18, 2016 at 01:11:10PM +0200, Jani Nikula wrote:
>> In sequence block v2, and only in v2, the gpio source (i.e. IOSF port)
>> is specified separately.
>>
>> v2: initialize gpio_source to 0 and handle v1 and v2 in the same branch
>>
>> Signed-off-by: Jani Nikula <[email protected]>
>
> Reviewed-by: Ville Syrjälä <[email protected]>
Pushed to drm-intel-next-queued, thanks for the review.
BR,
Jani.
>
>> ---
>> drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 22 ++++++++++++++++++----
>> 1 file changed, 18 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
>> b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
>> index f687b2e9d8ca..af1a47b5224f 100644
>> --- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
>> +++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
>> @@ -198,7 +198,7 @@ static const u8 *mipi_exec_delay(struct intel_dsi
>> *intel_dsi, const u8 *data)
>>
>> static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
>> {
>> - u8 gpio_index, action;
>> + u8 gpio_source, gpio_index, action, port;
>> u16 function, pad;
>> u32 val;
>> struct drm_device *dev = intel_dsi->base.base.dev;
>> @@ -209,6 +209,12 @@ static const u8 *mipi_exec_gpio(struct intel_dsi
>> *intel_dsi, const u8 *data)
>>
>> gpio_index = *data++;
>>
>> + /* gpio source in sequence v2 only */
>> + if (dev_priv->vbt.dsi.seq_version == 2)
>> + gpio_source = (*data >> 1) & 3;
>> + else
>> + gpio_source = 0;
>> +
>> /* pull up/down */
>> action = *data++ & 1;
>>
>> @@ -225,6 +231,15 @@ static const u8 *mipi_exec_gpio(struct intel_dsi
>> *intel_dsi, const u8 *data)
>> if (dev_priv->vbt.dsi.seq_version >= 3) {
>> DRM_DEBUG_KMS("GPIO element v3 not supported\n");
>> goto out;
>> + } else {
>> + if (gpio_source == 0) {
>> + port = IOSF_PORT_GPIO_NC;
>> + } else if (gpio_source == 1) {
>> + port = IOSF_PORT_GPIO_SC;
>> + } else {
>> + DRM_DEBUG_KMS("unknown gpio source %u\n", gpio_source);
>> + goto out;
>> + }
>> }
>>
>> function = gtable[gpio_index].function_reg;
>> @@ -234,15 +249,14 @@ static const u8 *mipi_exec_gpio(struct intel_dsi
>> *intel_dsi, const u8 *data)
>> if (!gtable[gpio_index].init) {
>> /* program the function */
>> /* FIXME: remove constant below */
>> - vlv_iosf_sb_write(dev_priv, IOSF_PORT_GPIO_NC, function,
>> - 0x2000CC00);
>> + vlv_iosf_sb_write(dev_priv, port, function, 0x2000CC00);
>> gtable[gpio_index].init = 1;
>> }
>>
>> val = 0x4 | action;
>>
>> /* pull up/down */
>> - vlv_iosf_sb_write(dev_priv, IOSF_PORT_GPIO_NC, pad, val);
>> + vlv_iosf_sb_write(dev_priv, port, pad, val);
>> mutex_unlock(&dev_priv->sb_lock);
>>
>> out:
>> --
>> 2.1.4
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
