Op 09-03-16 om 22:58 schreef [email protected]: > From: Clint Taylor <[email protected]> > > WARNING: Using ChromeOS with an eDP panel and a 4K@60 DP monitor connected > to DDI1 the system will hard hang during a cold boot. Occurs when DDI1 > is enabled when the cdclk is less then required. DP connected to DDI2 > and HPD on either port works correctly. > > Set cdclk based on the max required pixel clock based on VCO > selected. Track boot vco instead of boot cdclk. > > The vco is now tracked at the atomic level and all CRTCs updated if > the required vco is changed. Not tested with eDP v1.4 panels that > require 8640 vco due to availability. > > V1: initial version > V2: add vco tracking in intel_dp_compute_config(), rename > skl_boot_cdclk. > V3: rebase, V2 feedback not possible as encoders are not aware of > atomic. > V4: track target vco is atomic state. modeset all CRTCs if vco changes > V5: rename atomic variable, cleaner if/else logic, use existing vco if > encoder does not return a new vco value. check_patch.pl cleanup > V6: simplify logic in intel_modeset_checks. > V7: reorder an IF for readability and whitespace fix. > V8: use dev_cdclk for tracking new cdclk during atomic > > Signed-off-by: Clint Taylor <[email protected]> > Is the hang in the commit message introduced by this commit, or fixed by this commit?
~Maarten _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
