On Wed, Oct 21, 2015 at 09:04:39AM +0200, Daniel Vetter wrote:
> On Tue, Oct 20, 2015 at 11:49:48AM -0200, Paulo Zanoni wrote:
> > The hardware already takes care of disabling and recompressing FBC
> > when we do a page flip, so all we need to do is to update the fence
> > registers and move on.
> >
> > One of the important things to notice is that on the pre-gen6
> > platforms the fence is programmed on the FBC control register and the
> > documentation says we can't update the control register while FBC is
> > enabled. This would basically mean we'd have to to disable+enable FBC
> > at every flip in order to make sure the hardware tracking still works,
> > which doesn't seem to make too much sense. So I sent an email to the
> > hardware team requesting some clarification. The information I got was
> > this:
> >
> > "I don't think any hardware is latching on to 0x100100, 0x100104, or
> > the old fence number in FBC_CTL. Instructions against changing on the
> > fly would be to simplify testing and ensure you don't miss any
> > invalidation that happened right at that time."
> >
> > So I guess we're fine for flips. But I can't really say I tested FBC
> > on these ancient platforms - nor that I'll ever propose enabling FBC
> > by default on them exactly because of problems like these.
> >
> > Testcase: igt/kms_frontbuffer_tracking/fbc*-fliptrack
> > Signed-off-by: Paulo Zanoni <[email protected]>
>
> Iirc on pre-g4x flips don't invalidate the fbc compression, and we do
> actually have to disable fbc entirely.
Nope. At least my gen2 was doing fine with hw flip nuke >1 year ago.
> There's some funky language that if
> you want to flip with fbc you have to track the new backbuffer.
>
> So I'm not entirely sure this is correct for the i8x case. Otoh we don't
> ever enable it, so we could also just nuke the i8x fbc code. Either way it
> doesn't matter to much.
>
> > ---
> > drivers/gpu/drm/i915/i915_drv.h | 1 +
> > drivers/gpu/drm/i915/i915_reg.h | 3 +
> > drivers/gpu/drm/i915/intel_display.c | 1 -
> > drivers/gpu/drm/i915/intel_drv.h | 2 +
> > drivers/gpu/drm/i915/intel_fbc.c | 98
> > +++++++++++++++++++++++++++++++-
> > drivers/gpu/drm/i915/intel_frontbuffer.c | 1 +
> > 6 files changed, 103 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h
> > b/drivers/gpu/drm/i915/i915_drv.h
> > index c334525..f04f56f 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -930,6 +930,7 @@ struct i915_fbc {
> > bool (*fbc_enabled)(struct drm_i915_private *dev_priv);
> > void (*enable_fbc)(struct intel_crtc *crtc);
> > void (*disable_fbc)(struct drm_i915_private *dev_priv);
> > + void (*flip_prepare)(struct drm_i915_private *dev_priv);
> > };
> >
> > /**
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h
> > index 9ebf032..3620b59 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -2028,6 +2028,7 @@ enum skl_disp_power_wells {
> > #define FBC_CTL_C3_IDLE (1<<13)
> > #define FBC_CTL_STRIDE_SHIFT (5)
> > #define FBC_CTL_FENCENO_SHIFT (0)
> > +#define FBC_CTL_FENCENO_MASK 0xF
> > #define FBC_COMMAND 0x0320c
> > #define FBC_CMD_COMPRESS (1<<0)
> > #define FBC_STATUS 0x03210
> > @@ -2064,6 +2065,7 @@ enum skl_disp_power_wells {
> > #define DPFC_CTL_LIMIT_1X (0<<6)
> > #define DPFC_CTL_LIMIT_2X (1<<6)
> > #define DPFC_CTL_LIMIT_4X (2<<6)
> > +#define DPFC_CTL_FENCE_MASK 0xF
> > #define DPFC_RECOMP_CTL 0x320c
> > #define DPFC_RECOMP_STALL_EN (1<<27)
> > #define DPFC_RECOMP_STALL_WM_SHIFT (16)
> > @@ -2086,6 +2088,7 @@ enum skl_disp_power_wells {
> > #define FBC_CTL_FALSE_COLOR (1<<10)
> > /* The bit 28-8 is reserved */
> > #define DPFC_RESERVED (0x1FFFFF00)
> > +#define ILK_DPFC_FENCE_MASK 0xF
> > #define ILK_DPFC_RECOMP_CTL 0x4320c
> > #define ILK_DPFC_STATUS 0x43210
> > #define ILK_DPFC_FENCE_YOFF 0x43218
> > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index 1fc1d24..e83a428 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -11470,7 +11470,6 @@ static int intel_crtc_page_flip(struct drm_crtc
> > *crtc,
> > to_intel_plane(primary)->frontbuffer_bit);
> > mutex_unlock(&dev->struct_mutex);
> >
> > - intel_fbc_disable_crtc(intel_crtc);
> > intel_frontbuffer_flip_prepare(dev,
> >
> > to_intel_plane(primary)->frontbuffer_bit);
> >
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h
> > b/drivers/gpu/drm/i915/intel_drv.h
> > index dc55e4c..1e08c8a 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1287,6 +1287,8 @@ void intel_fbc_invalidate(struct drm_i915_private
> > *dev_priv,
> > enum fb_op_origin origin);
> > void intel_fbc_flush(struct drm_i915_private *dev_priv,
> > unsigned int frontbuffer_bits, enum fb_op_origin origin);
> > +void intel_fbc_flip_prepare(struct drm_i915_private *dev_priv,
> > + unsigned int frontbuffer_bits);
> > void intel_fbc_cleanup_cfb(struct drm_i915_private *dev_priv);
> >
> > /* intel_hdmi.c */
> > diff --git a/drivers/gpu/drm/i915/intel_fbc.c
> > b/drivers/gpu/drm/i915/intel_fbc.c
> > index d9d7e54..9477379 100644
> > --- a/drivers/gpu/drm/i915/intel_fbc.c
> > +++ b/drivers/gpu/drm/i915/intel_fbc.c
> > @@ -82,6 +82,22 @@ static void i8xx_fbc_disable(struct drm_i915_private
> > *dev_priv)
> > DRM_DEBUG_KMS("disabled FBC\n");
> > }
> >
> > +static void i8xx_fbc_flip_prepare(struct drm_i915_private *dev_priv)
> > +{
> > + struct intel_crtc *crtc = dev_priv->fbc.crtc;
> > + struct drm_framebuffer *fb = crtc->base.primary->fb;
> > + struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> > + uint32_t val;
> > +
> > + /* Although the documentation suggests we can't change DPFC_CONTROL
> > + * while compression is enabled, the hardware guys said that updating
> > + * the fence register bits during a flip is fine. */
> > + val = I915_READ(FBC_CONTROL);
> > + val &= ~FBC_CTL_FENCENO_MASK;
> > + val |= obj->fence_reg;
> > + I915_WRITE(FBC_CONTROL, val);
> > +}
> > +
> > static void i8xx_fbc_enable(struct intel_crtc *crtc)
> > {
> > struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
> > @@ -161,6 +177,22 @@ static void g4x_fbc_enable(struct intel_crtc *crtc)
> > DRM_DEBUG_KMS("enabled fbc on plane %c\n", plane_name(crtc->plane));
> > }
> >
> > +static void g4x_fbc_flip_prepare(struct drm_i915_private *dev_priv)
> > +{
> > + struct intel_crtc *crtc = dev_priv->fbc.crtc;
> > + struct drm_framebuffer *fb = crtc->base.primary->fb;
> > + struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> > + uint32_t val;
> > +
> > + /* Although the documentation suggests we can't change DPFC_CONTROL
> > + * while compression is enabled, the hardware guys said that updating
> > + * the fence register bits during a flip is fine. */
> > + val = I915_READ(DPFC_CONTROL);
> > + val &= ~DPFC_CTL_FENCE_MASK;
> > + val |= obj->fence_reg;
> > + I915_WRITE(DPFC_CONTROL, val);
> > +}
> > +
> > static void g4x_fbc_disable(struct drm_i915_private *dev_priv)
> > {
> > u32 dpfc_ctl;
> > @@ -236,6 +268,31 @@ static void ilk_fbc_enable(struct intel_crtc *crtc)
> > DRM_DEBUG_KMS("enabled fbc on plane %c\n", plane_name(crtc->plane));
> > }
> >
> > +static void ilk_fbc_flip_prepare(struct drm_i915_private *dev_priv)
> > +{
> > + struct intel_crtc *crtc = dev_priv->fbc.crtc;
> > + struct drm_framebuffer *fb = crtc->base.primary->fb;
> > + struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> > + uint32_t val;
> > +
> > + /* Although the documentation suggests we can't change DPFC_CONTROL
> > + * while compression is enabled, the hardware guys said that updating
> > + * the fence register bits during a flip is fine. */
> > + val = I915_READ(ILK_DPFC_CONTROL);
> > + val &= ~ILK_DPFC_FENCE_MASK;
> > + val |= obj->fence_reg;
> > + I915_WRITE(ILK_DPFC_CONTROL, val);
> > +}
> > +
> > +static void snb_fbc_flip_prepare(struct drm_i915_private *dev_priv)
> > +{
> > + struct intel_crtc *crtc = dev_priv->fbc.crtc;
> > + struct drm_framebuffer *fb = crtc->base.primary->fb;
> > + struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> > +
> > + I915_WRITE(SNB_DPFC_CTL_SA, SNB_CPU_FENCE_ENABLE | obj->fence_reg);
> > +}
> > +
> > static void ilk_fbc_disable(struct drm_i915_private *dev_priv)
> > {
> > u32 dpfc_ctl;
> > @@ -1020,14 +1077,44 @@ void intel_fbc_flush(struct drm_i915_private
> > *dev_priv,
> >
> > if (origin == ORIGIN_GTT)
> > return;
> > + if (origin == ORIGIN_FLIP && dev_priv->fbc.enabled)
> > + return;
> >
> > mutex_lock(&dev_priv->fbc.lock);
> >
> > dev_priv->fbc.busy_bits &= ~frontbuffer_bits;
> >
> > if (!dev_priv->fbc.busy_bits) {
> > - __intel_fbc_disable(dev_priv);
> > - __intel_fbc_update(dev_priv);
> > + if (origin == ORIGIN_FLIP) {
> > + __intel_fbc_update(dev_priv);
> > + } else {
> > + __intel_fbc_disable(dev_priv);
> > + __intel_fbc_update(dev_priv);
> > + }
> > + }
> > +
> > + mutex_unlock(&dev_priv->fbc.lock);
> > +}
> > +
> > +void intel_fbc_flip_prepare(struct drm_i915_private *dev_priv,
> > + unsigned int frontbuffer_bits)
> > +{
> > + unsigned int fbc_bits;
> > +
> > + if (!fbc_supported(dev_priv))
> > + return;
> > +
> > + mutex_lock(&dev_priv->fbc.lock);
> > +
> > + if (dev_priv->fbc.enabled) {
> > + fbc_bits = INTEL_FRONTBUFFER_PRIMARY(dev_priv->fbc.crtc->pipe);
> > + if (fbc_bits & frontbuffer_bits)
> > + dev_priv->fbc.flip_prepare(dev_priv);
> > + } else if (dev_priv->fbc.fbc_work) {
> > + fbc_bits = INTEL_FRONTBUFFER_PRIMARY(
> > + dev_priv->fbc.fbc_work->crtc->pipe);
> > + if (fbc_bits & frontbuffer_bits)
> > + __intel_fbc_disable(dev_priv);
> > }
> >
> > mutex_unlock(&dev_priv->fbc.lock);
> > @@ -1063,18 +1150,25 @@ void intel_fbc_init(struct drm_i915_private
> > *dev_priv)
> > dev_priv->fbc.fbc_enabled = ilk_fbc_enabled;
> > dev_priv->fbc.enable_fbc = gen7_fbc_enable;
> > dev_priv->fbc.disable_fbc = ilk_fbc_disable;
> > + dev_priv->fbc.flip_prepare = snb_fbc_flip_prepare;
> > } else if (INTEL_INFO(dev_priv)->gen >= 5) {
> > dev_priv->fbc.fbc_enabled = ilk_fbc_enabled;
> > dev_priv->fbc.enable_fbc = ilk_fbc_enable;
> > dev_priv->fbc.disable_fbc = ilk_fbc_disable;
> > + if (INTEL_INFO(dev_priv)->gen == 5)
> > + dev_priv->fbc.flip_prepare = ilk_fbc_flip_prepare;
> > + else
> > + dev_priv->fbc.flip_prepare = snb_fbc_flip_prepare;
> > } else if (IS_GM45(dev_priv)) {
> > dev_priv->fbc.fbc_enabled = g4x_fbc_enabled;
> > dev_priv->fbc.enable_fbc = g4x_fbc_enable;
> > dev_priv->fbc.disable_fbc = g4x_fbc_disable;
> > + dev_priv->fbc.flip_prepare = g4x_fbc_flip_prepare;
> > } else {
> > dev_priv->fbc.fbc_enabled = i8xx_fbc_enabled;
> > dev_priv->fbc.enable_fbc = i8xx_fbc_enable;
> > dev_priv->fbc.disable_fbc = i8xx_fbc_disable;
> > + dev_priv->fbc.flip_prepare = i8xx_fbc_flip_prepare;
> >
> > /* This value was pulled out of someone's hat */
> > I915_WRITE(FBC_CONTROL, 500 << FBC_CTL_INTERVAL_SHIFT);
> > diff --git a/drivers/gpu/drm/i915/intel_frontbuffer.c
> > b/drivers/gpu/drm/i915/intel_frontbuffer.c
> > index ac85357..31a1ad3 100644
> > --- a/drivers/gpu/drm/i915/intel_frontbuffer.c
> > +++ b/drivers/gpu/drm/i915/intel_frontbuffer.c
> > @@ -192,6 +192,7 @@ void intel_frontbuffer_flip_prepare(struct drm_device
> > *dev,
> > mutex_unlock(&dev_priv->fb_tracking.lock);
> >
> > intel_psr_single_frame_update(dev, frontbuffer_bits);
> > + intel_fbc_flip_prepare(dev_priv, frontbuffer_bits);
>
> I haven't read ahead, but both psr single frame update and this here
> should be converted. Since with this here there's the small (but very
> real) chance that rendering the buffer for this flip will take longer than
> the next vblank, and at least for the psr case we'd then fail to upload
> the changes. For fbc it's less of a problem, since if you page flip then
> userspace shouldn't race frontbuffer rendering.
>
> So I think this is ok (but the PSR case should be fixed by moving the
> register write itself into the atomic update, which means we need to have
> a boolean to decided whether to do that in the intel_crtc_state).
> -Daniel
>
>
> > }
> >
> > /**
> > --
> > 2.6.1
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > [email protected]
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
