On Tue, Oct 13, 2015 at 11:40:23AM +0200, Takashi Iwai wrote:
> On Mon, 12 Oct 2015 10:17:51 +0200,
> David Henningsson wrote:
> >
> >
> >
> > On 2015-10-12 10:07, David Henningsson wrote:
> > > To make kernel-doc happy, the i915_audio_component_audio_ops struct
> > > cannot be nested.
> > >
> > > Signed-off-by: David Henningsson <[email protected]>
> > > ---
> >
> > Changes since v1:
> >
> > * Added a notice about when pin_eld_notify is called
> >
> > * Uses new inline struct member style
> >
> > Verified with "make htmldocs", looks fine to me.
> >
> > Also, applies to Takashi's tree (master branch), maybe we should take it
> > through Takashi's tree to avoid conflicts, especially as there might be
> > more stuff coming that way (dp mst support from Mengdong, and perhaps
> > info retrieval from me).
>
> I'm fine to take it, just let me know (and give acks).
There's other doc patches floating around for this, and I've already
pulled in your branch. Soproabbyl simpler if I pull this into
drm-intel.git
-Daniel
>
>
> thanks,
>
> Takashi
>
>
> >
> >
> > > Documentation/DocBook/drm.tmpl | 1 +
> > > include/drm/i915_component.h | 92
> > > ++++++++++++++++++++++++++++++------------
> > > 2 files changed, 67 insertions(+), 26 deletions(-)
> > >
> > > diff --git a/Documentation/DocBook/drm.tmpl
> > > b/Documentation/DocBook/drm.tmpl
> > > index 9ddf8c6..f16e4e8 100644
> > > --- a/Documentation/DocBook/drm.tmpl
> > > +++ b/Documentation/DocBook/drm.tmpl
> > > @@ -4051,6 +4051,7 @@ int num_ioctls;</synopsis>
> > > <title>High Definition Audio</title>
> > > !Pdrivers/gpu/drm/i915/intel_audio.c High Definition Audio over HDMI
> > > and Display Port
> > > !Idrivers/gpu/drm/i915/intel_audio.c
> > > +!Iinclude/drm/i915_component.h
> > > </sect2>
> > > <sect2>
> > > <title>Panel Self Refresh PSR (PSR/SRD)</title>
> > > diff --git a/include/drm/i915_component.h b/include/drm/i915_component.h
> > > index 89dc7d6..76c10c8 100644
> > > --- a/include/drm/i915_component.h
> > > +++ b/include/drm/i915_component.h
> > > @@ -30,38 +30,78 @@
> > > */
> > > #define MAX_PORTS 5
> > >
> > > +/**
> > > + * struct i915_audio_component_ops - Ops implemented by i915 driver,
> > > called by hda driver
> > > + */
> > > +struct i915_audio_component_ops {
> > > + /**
> > > + * @owner: i915 module
> > > + */
> > > + struct module *owner;
> > > + /**
> > > + * @get_power: Request that power well is to be turned on
> > > + */
> > > + void (*get_power)(struct device *);
> > > + /**
> > > + * @put_power: Allow the power well to be turned off
> > > + */
> > > + void (*put_power)(struct device *);
> > > + /**
> > > + * @codec_wake_override: Force the audio codec to stay awake
> > > + */
> > > + void (*codec_wake_override)(struct device *, bool enable);
> > > + /**
> > > + * @get_cdclk_freq: Query the i915 driver about the current cdclk
> > > frequency
> > > + */
> > > + int (*get_cdclk_freq)(struct device *);
> > > + /**
> > > + * @sync_audio_rate: set n/cts based on the sample rate
> > > + *
> > > + * Called from audio driver. After audio driver sets the
> > > + * sample rate, it will call this function to set n/cts
> > > + */
> > > + int (*sync_audio_rate)(struct device *, int port, int rate);
> > > +};
> > > +
> > > +/**
> > > + * struct i915_audio_component_audio_ops - Ops implemented by hda
> > > driver, called by i915 driver
> > > + */
> > > +struct i915_audio_component_audio_ops {
> > > + /**
> > > + * @audio_ptr: Pointer to be used in call to pin_eld_notify
> > > + */
> > > + void *audio_ptr;
> > > + /**
> > > + * @pin_eld_notify: Notify the HDA driver that pin sense and/or ELD
> > > information has changed
> > > + *
> > > + * Called when the i915 driver has set up audio pipeline or has just
> > > + * begun to tear it down. This allows the HDA driver to update its
> > > + * status accordingly (even when the HDA controller is in power save
> > > + * mode).
> > > + */
> > > + void (*pin_eld_notify)(void *audio_ptr, int port);
> > > +};
> > > +
> > > +/**
> > > + * struct i915_audio_component - Used for direct communication between
> > > i915 and hda drivers
> > > + */
> > > struct i915_audio_component {
> > > + /**
> > > + * @dev: i915 device, used as parameter for ops
> > > + */
> > > struct device *dev;
> > > /**
> > > * @aud_sample_rate: the array of audio sample rate per port
> > > */
> > > int aud_sample_rate[MAX_PORTS];
> > > -
> > > - const struct i915_audio_component_ops {
> > > - struct module *owner;
> > > - void (*get_power)(struct device *);
> > > - void (*put_power)(struct device *);
> > > - void (*codec_wake_override)(struct device *, bool enable);
> > > - int (*get_cdclk_freq)(struct device *);
> > > - /**
> > > - * @sync_audio_rate: set n/cts based on the sample rate
> > > - *
> > > - * Called from audio driver. After audio driver sets the
> > > - * sample rate, it will call this function to set n/cts
> > > - */
> > > - int (*sync_audio_rate)(struct device *, int port, int rate);
> > > - } *ops;
> > > -
> > > - const struct i915_audio_component_audio_ops {
> > > - void *audio_ptr;
> > > - /**
> > > - * Call from i915 driver, notifying the HDA driver that
> > > - * pin sense and/or ELD information has changed.
> > > - * @audio_ptr: HDA driver object
> > > - * @port: Which port has changed (PORTA / PORTB /
> > > PORTC etc)
> > > - */
> > > - void (*pin_eld_notify)(void *audio_ptr, int port);
> > > - } *audio_ops;
> > > + /**
> > > + * @ops: Ops implemented by i915 driver, called by hda driver
> > > + */
> > > + const struct i915_audio_component_ops *ops;
> > > + /**
> > > + * @audio_ops: Ops implemented by hda driver, called by i915 driver
> > > + */
> > > + const struct i915_audio_component_audio_ops *audio_ops;
> > > };
> > >
> > > #endif /* _I915_COMPONENT_H_ */
> > >
> >
> > --
> > David Henningsson, Canonical Ltd.
> > https://launchpad.net/~diwic
> >
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
