On Fri, Jun 19, 2015 at 03:23:29AM +0530, Gaurav K Singh wrote:
> During disable sequence for MIPI encoder in command mode, disable
> MIPI display self-refresh mode bit in Pipe Ctrl reg.
>
> v2: Use crtc state flag instead of loop over encoders (Daniel)
>
> Signed-off-by: Gaurav K Singh <[email protected]>
> Signed-off-by: Yogesh Mohan Marimuthu <[email protected]>
> Signed-off-by: Shobhit Kumar <[email protected]>
> ---
> drivers/gpu/drm/i915/intel_display.c | 3 +++
> drivers/gpu/drm/i915/intel_drv.h | 3 +++
> drivers/gpu/drm/i915/intel_dsi.c | 3 +++
> 3 files changed, 9 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 067b1de..dd518d6 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2193,6 +2193,9 @@ static void intel_disable_pipe(struct intel_crtc *crtc)
> if ((val & PIPECONF_ENABLE) == 0)
> return;
>
> + if (crtc->config->dsi_self_refresh)
> + val = val & ~PIPECONF_MIPI_DSR_ENABLE;
This shouldn't be required since we just clear all of PIPECONF when
disabling (well when re-enabling too) the crtc.
What's missing though is the hw state readout & cross-check support for
this new state bit. Also the code to set this bit seems to be missing.
-Daniel
> +
> /*
> * Double wide has implications for planes
> * so best keep it disabled when not needed.
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index 14562c6..4298a00 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -444,6 +444,9 @@ struct intel_crtc_state {
> bool double_wide;
>
> bool dp_encoder_is_mst;
> +
> + bool dsi_self_refresh;
> +
> int pbn;
>
> struct intel_crtc_scaler_state scaler_state;
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> b/drivers/gpu/drm/i915/intel_dsi.c
> index 7021591..36d8ad6 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -308,6 +308,9 @@ static bool intel_dsi_compute_config(struct intel_encoder
> *encoder,
>
> DRM_DEBUG_KMS("\n");
>
> + if (is_cmd_mode(intel_dsi))
> + config->dsi_self_refresh = true;
> +
> if (fixed_mode)
> intel_fixed_panel_mode(fixed_mode, adjusted_mode);
>
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
