On Mon, Apr 13, 2015 at 03:53:22PM +0530, Jindal, Sonika wrote:
>
>
> On 4/13/2015 3:40 PM, Ville Syrjälä wrote:
> > On Mon, Apr 13, 2015 at 09:36:02AM +0530, Jindal, Sonika wrote:
> >>
> >>
> >> On 4/10/2015 8:14 PM, Ville Syrjälä wrote:
> >>> On Fri, Apr 10, 2015 at 04:17:17PM +0200, Daniel Vetter wrote:
> >>>> On Fri, Apr 10, 2015 at 02:37:29PM +0530, Sonika Jindal wrote:
> >>>>> v2: Moving creation of property in a function, checking for 90/270
> >>>>> rotation simultaneously (Chris)
> >>>>> Letting primary plane to be positioned
> >>>>> v3: Adding if/else for 90/270 and rest params programming, adding check
> >>>>> for
> >>>>> pixel_format, some cleanup (review comments)
> >>>>> v4: Adding right pixel_formats, using src_* params instead of crtc_*
> >>>>> for offset
> >>>>> and size programming (Ville)
> >>>>> v5: Rebased on -nightly and Tvrtko's series for gtt remapping.
> >>>>> v6: Rebased on -nightly (Tvrtko's series merged)
> >>>>> v7: Moving pixel_format check to intel_atomic_plane_check (Matt)
> >>>>>
> >>>>> Signed-off-by: Sonika Jindal <[email protected]>
> >>>>> Reviewed-by: Matt Roper <[email protected]>
> >>>>
> >>>> Patches are missing the Testcase: tag, please add that. Also, are all the
> >>>> igt committed or not yet? Pulled these two in meanwhile.
> >>>
> >>> Things are going somewhat broken because you didn't apply my plane
> >>> state stuff. Hmm. Actually it sort of looks that it might work by luck
> >>> as long as the primary plane doesn't get clipped since this is bashing
> >>> the user state directly into the hardware registers and not the derived
> >>> state (ie. clipped coordinates).
> >>>
> >> I was hoping your changes get merged, but not sure why they are held up.
> >>
> >>> Also I see my review comment about the 90 vs. 270 rotation mixup was
> >>> ignored at least.
> >>>
> >> I never really got the to understand the need of reversing 90 and 270 :)
> >> The last discussion was not concluded, AFAIR.
> >> Things look correct to me and work fine with the testcase also.
> >> Is there something completely different which I am unable to get?
> >
> > BSpec gives me the impression the hw rotation is cw, whereas the drm one
> > is ccw.
> >
> Yes, HW rotation is cw as per bspec. In drm, where do we consider it as
> anti-cw? I assume it is cw because all the macros work as expected, ie cw.
The ccw rule was inherited from XRandR. I'm not sure what macros you
mean, but drm_rect_rotate() will certainly give you wrong results if
you assume cw.
>
> >>
> >> -Sonika
> >>
> >>>> -Daniel
> >>>>
> >>>>> ---
> >>>>> drivers/gpu/drm/i915/i915_reg.h | 2 +
> >>>>> drivers/gpu/drm/i915/intel_atomic_plane.c | 24 ++++++++
> >>>>> drivers/gpu/drm/i915/intel_display.c | 88
> >>>>> ++++++++++++++++++++---------
> >>>>> drivers/gpu/drm/i915/intel_drv.h | 6 ++
> >>>>> drivers/gpu/drm/i915/intel_sprite.c | 52 ++++++++++++-----
> >>>>> 5 files changed, 131 insertions(+), 41 deletions(-)
> >>>>>
> >>>>> diff --git a/drivers/gpu/drm/i915/i915_reg.h
> >>>>> b/drivers/gpu/drm/i915/i915_reg.h
> >>>>> index b522eb6..564bbd5 100644
> >>>>> --- a/drivers/gpu/drm/i915/i915_reg.h
> >>>>> +++ b/drivers/gpu/drm/i915/i915_reg.h
> >>>>> @@ -4854,7 +4854,9 @@ enum skl_disp_power_wells {
> >>>>> #define PLANE_CTL_ALPHA_HW_PREMULTIPLY ( 3 << 4)
> >>>>> #define PLANE_CTL_ROTATE_MASK 0x3
> >>>>> #define PLANE_CTL_ROTATE_0 0x0
> >>>>> +#define PLANE_CTL_ROTATE_90 0x1
> >>>>> #define PLANE_CTL_ROTATE_180 0x2
> >>>>> +#define PLANE_CTL_ROTATE_270 0x3
> >>>>> #define _PLANE_STRIDE_1_A 0x70188
> >>>>> #define _PLANE_STRIDE_2_A 0x70288
> >>>>> #define _PLANE_STRIDE_3_A 0x70388
> >>>>> diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c
> >>>>> b/drivers/gpu/drm/i915/intel_atomic_plane.c
> >>>>> index 976b891..a27ee8c 100644
> >>>>> --- a/drivers/gpu/drm/i915/intel_atomic_plane.c
> >>>>> +++ b/drivers/gpu/drm/i915/intel_atomic_plane.c
> >>>>> @@ -162,6 +162,30 @@ static int intel_plane_atomic_check(struct
> >>>>> drm_plane *plane,
> >>>>> (1 << drm_plane_index(plane));
> >>>>> }
> >>>>>
> >>>>> + if (state->fb && intel_rotation_90_or_270(state->rotation)) {
> >>>>> + if (!(state->fb->modifier[0] == I915_FORMAT_MOD_Y_TILED
> >>>>> ||
> >>>>> + state->fb->modifier[0] ==
> >>>>> I915_FORMAT_MOD_Yf_TILED)) {
> >>>>> + DRM_DEBUG_KMS("Y/Yf tiling required for
> >>>>> 90/270!\n");
> >>>>> + return -EINVAL;
> >>>>> + }
> >>>>> +
> >>>>> + /*
> >>>>> + * 90/270 is not allowed with RGB64 16:16:16:16,
> >>>>> + * RGB 16-bit 5:6:5, and Indexed 8-bit.
> >>>>> + * TBD: Add RGB64 case once its added in supported
> >>>>> format list.
> >>>>> + */
> >>>>> + switch (state->fb->pixel_format) {
> >>>>> + case DRM_FORMAT_C8:
> >>>>> + case DRM_FORMAT_RGB565:
> >>>>> + DRM_DEBUG_KMS("Unsupported pixel format %s for
> >>>>> 90/270!\n",
> >>>>> +
> >>>>> drm_get_format_name(state->fb->pixel_format));
> >>>>> + return -EINVAL;
> >>>>> +
> >>>>> + default:
> >>>>> + break;
> >>>>> + }
> >>>>> + }
> >>>>> +
> >>>>> return intel_plane->check_plane(plane, intel_state);
> >>>>> }
> >>>>>
> >>>>> diff --git a/drivers/gpu/drm/i915/intel_display.c
> >>>>> b/drivers/gpu/drm/i915/intel_display.c
> >>>>> index f0bbc22..4de544c 100644
> >>>>> --- a/drivers/gpu/drm/i915/intel_display.c
> >>>>> +++ b/drivers/gpu/drm/i915/intel_display.c
> >>>>> @@ -2311,13 +2311,6 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view
> >>>>> *view, struct drm_framebuffer *fb,
> >>>>> info->pitch = fb->pitches[0];
> >>>>> info->fb_modifier = fb->modifier[0];
> >>>>>
> >>>>> - if (!(info->fb_modifier == I915_FORMAT_MOD_Y_TILED ||
> >>>>> - info->fb_modifier == I915_FORMAT_MOD_Yf_TILED)) {
> >>>>> - DRM_DEBUG_KMS(
> >>>>> - "Y or Yf tiling is needed for 90/270
> >>>>> rotation!\n");
> >>>>> - return -EINVAL;
> >>>>> - }
> >>>>> -
> >>>>> return 0;
> >>>>> }
> >>>>>
> >>>>> @@ -2919,8 +2912,12 @@ static void skylake_update_primary_plane(struct
> >>>>> drm_crtc *crtc,
> >>>>> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> >>>>> struct drm_i915_gem_object *obj;
> >>>>> int pipe = intel_crtc->pipe;
> >>>>> - u32 plane_ctl, stride_div;
> >>>>> + u32 plane_ctl, stride_div, stride;
> >>>>> + u32 tile_height, plane_offset, plane_size;
> >>>>> + unsigned int rotation;
> >>>>> + int x_offset, y_offset;
> >>>>> unsigned long surf_addr;
> >>>>> + struct drm_plane *plane;
> >>>>>
> >>>>> if (!intel_crtc->primary_enabled) {
> >>>>> I915_WRITE(PLANE_CTL(pipe, 0), 0);
> >>>>> @@ -2981,21 +2978,51 @@ static void skylake_update_primary_plane(struct
> >>>>> drm_crtc *crtc,
> >>>>> }
> >>>>>
> >>>>> plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
> >>>>> - if (crtc->primary->state->rotation == BIT(DRM_ROTATE_180))
> >>>>> +
> >>>>> + plane = crtc->primary;
> >>>>> + rotation = plane->state->rotation;
> >>>>> + switch (rotation) {
> >>>>> + case BIT(DRM_ROTATE_90):
> >>>>> + plane_ctl |= PLANE_CTL_ROTATE_90;
> >>>>> + break;
> >>>>> +
> >>>>> + case BIT(DRM_ROTATE_180):
> >>>>> plane_ctl |= PLANE_CTL_ROTATE_180;
> >>>>> + break;
> >>>>> +
> >>>>> + case BIT(DRM_ROTATE_270):
> >>>>> + plane_ctl |= PLANE_CTL_ROTATE_270;
> >>>>> + break;
> >>>>> + }
> >>>>>
> >>>>> obj = intel_fb_obj(fb);
> >>>>> stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
> >>>>> fb->pixel_format);
> >>>>> - surf_addr =
> >>>>> intel_plane_obj_offset(to_intel_plane(crtc->primary), obj);
> >>>>> + surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj);
> >>>>> +
> >>>>> + if (intel_rotation_90_or_270(rotation)) {
> >>>>> + /* stride = Surface height in tiles */
> >>>>> + tile_height = intel_tile_height(dev, fb->bits_per_pixel,
> >>>>> + fb->modifier[0]);
> >>>>> + stride = DIV_ROUND_UP(fb->height, tile_height);
> >>>>> + x_offset = stride * tile_height - y -
> >>>>> (plane->state->src_h >> 16);
> >>>>> + y_offset = x;
> >>>>> + plane_size = ((plane->state->src_w >> 16) - 1) << 16 |
> >>>>> + ((plane->state->src_h >> 16) -
> >>>>> 1);
> >>>>> + } else {
> >>>>> + stride = fb->pitches[0] / stride_div;
> >>>>> + x_offset = x;
> >>>>> + y_offset = y;
> >>>>> + plane_size = ((plane->state->src_h >> 16) - 1) << 16 |
> >>>>> + ((plane->state->src_w >> 16) - 1);
> >>>>> + }
> >>>>> + plane_offset = y_offset << 16 | x_offset;
> >>>>>
> >>>>> I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
> >>>>> I915_WRITE(PLANE_POS(pipe, 0), 0);
> >>>>> - I915_WRITE(PLANE_OFFSET(pipe, 0), (y << 16) | x);
> >>>>> - I915_WRITE(PLANE_SIZE(pipe, 0),
> >>>>> - (intel_crtc->config->pipe_src_h - 1) << 16 |
> >>>>> - (intel_crtc->config->pipe_src_w - 1));
> >>>>> - I915_WRITE(PLANE_STRIDE(pipe, 0), fb->pitches[0] / stride_div);
> >>>>> + I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset);
> >>>>> + I915_WRITE(PLANE_SIZE(pipe, 0), plane_size);
> >>>>> + I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
> >>>>> I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
> >>>>>
> >>>>> POSTING_READ(PLANE_SURF(pipe, 0));
> >>>>> @@ -12406,23 +12433,32 @@ static struct drm_plane
> >>>>> *intel_primary_plane_create(struct drm_device *dev,
> >>>>> intel_primary_formats, num_formats,
> >>>>> DRM_PLANE_TYPE_PRIMARY);
> >>>>>
> >>>>> - if (INTEL_INFO(dev)->gen >= 4) {
> >>>>> - if (!dev->mode_config.rotation_property)
> >>>>> - dev->mode_config.rotation_property =
> >>>>> - drm_mode_create_rotation_property(dev,
> >>>>> -
> >>>>> BIT(DRM_ROTATE_0) |
> >>>>> -
> >>>>> BIT(DRM_ROTATE_180));
> >>>>> - if (dev->mode_config.rotation_property)
> >>>>> - drm_object_attach_property(&primary->base.base,
> >>>>> - dev->mode_config.rotation_property,
> >>>>> - state->base.rotation);
> >>>>> - }
> >>>>> + if (INTEL_INFO(dev)->gen >= 4)
> >>>>> + intel_create_rotation_property(dev, primary);
> >>>>>
> >>>>> drm_plane_helper_add(&primary->base, &intel_plane_helper_funcs);
> >>>>>
> >>>>> return &primary->base;
> >>>>> }
> >>>>>
> >>>>> +void intel_create_rotation_property(struct drm_device *dev, struct
> >>>>> intel_plane *plane)
> >>>>> +{
> >>>>> + if (!dev->mode_config.rotation_property) {
> >>>>> + unsigned long flags = BIT(DRM_ROTATE_0) |
> >>>>> + BIT(DRM_ROTATE_180);
> >>>>> +
> >>>>> + if (INTEL_INFO(dev)->gen >= 9)
> >>>>> + flags |= BIT(DRM_ROTATE_90) |
> >>>>> BIT(DRM_ROTATE_270);
> >>>>> +
> >>>>> + dev->mode_config.rotation_property =
> >>>>> + drm_mode_create_rotation_property(dev, flags);
> >>>>> + }
> >>>>> + if (dev->mode_config.rotation_property)
> >>>>> + drm_object_attach_property(&plane->base.base,
> >>>>> + dev->mode_config.rotation_property,
> >>>>> + plane->base.state->rotation);
> >>>>> +}
> >>>>> +
> >>>>> static int
> >>>>> intel_check_cursor_plane(struct drm_plane *plane,
> >>>>> struct intel_plane_state *state)
> >>>>> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> >>>>> b/drivers/gpu/drm/i915/intel_drv.h
> >>>>> index 811a1db..d32025a 100644
> >>>>> --- a/drivers/gpu/drm/i915/intel_drv.h
> >>>>> +++ b/drivers/gpu/drm/i915/intel_drv.h
> >>>>> @@ -995,6 +995,12 @@ intel_rotation_90_or_270(unsigned int rotation)
> >>>>> return rotation & (BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270));
> >>>>> }
> >>>>>
> >>>>> +unsigned int
> >>>>> +intel_tile_height(struct drm_device *dev, uint32_t bits_per_pixel,
> >>>>> + uint64_t fb_modifier);
> >>>>> +void intel_create_rotation_property(struct drm_device *dev,
> >>>>> + struct intel_plane *plane);
> >>>>> +
> >>>>> bool intel_wm_need_update(struct drm_plane *plane,
> >>>>> struct drm_plane_state *state);
> >>>>>
> >>>>> diff --git a/drivers/gpu/drm/i915/intel_sprite.c
> >>>>> b/drivers/gpu/drm/i915/intel_sprite.c
> >>>>> index f41e872..83adc9b 100644
> >>>>> --- a/drivers/gpu/drm/i915/intel_sprite.c
> >>>>> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> >>>>> @@ -190,10 +190,13 @@ skl_update_plane(struct drm_plane *drm_plane,
> >>>>> struct drm_crtc *crtc,
> >>>>> struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> >>>>> const int pipe = intel_plane->pipe;
> >>>>> const int plane = intel_plane->plane + 1;
> >>>>> - u32 plane_ctl, stride_div;
> >>>>> + u32 plane_ctl, stride_div, stride;
> >>>>> int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
> >>>>> const struct drm_intel_sprite_colorkey *key =
> >>>>> &intel_plane->ckey;
> >>>>> unsigned long surf_addr;
> >>>>> + u32 tile_height, plane_offset, plane_size;
> >>>>> + unsigned int rotation;
> >>>>> + int x_offset, y_offset;
> >>>>>
> >>>>> plane_ctl = PLANE_CTL_ENABLE |
> >>>>> PLANE_CTL_PIPE_CSC_ENABLE;
> >>>>> @@ -254,8 +257,20 @@ skl_update_plane(struct drm_plane *drm_plane,
> >>>>> struct drm_crtc *crtc,
> >>>>> MISSING_CASE(fb->modifier[0]);
> >>>>> }
> >>>>>
> >>>>> - if (drm_plane->state->rotation == BIT(DRM_ROTATE_180))
> >>>>> + rotation = drm_plane->state->rotation;
> >>>>> + switch (rotation) {
> >>>>> + case BIT(DRM_ROTATE_90):
> >>>>> + plane_ctl |= PLANE_CTL_ROTATE_90;
> >>>>> + break;
> >>>>> +
> >>>>> + case BIT(DRM_ROTATE_180):
> >>>>> plane_ctl |= PLANE_CTL_ROTATE_180;
> >>>>> + break;
> >>>>> +
> >>>>> + case BIT(DRM_ROTATE_270):
> >>>>> + plane_ctl |= PLANE_CTL_ROTATE_270;
> >>>>> + break;
> >>>>> + }
> >>>>>
> >>>>> intel_update_sprite_watermarks(drm_plane, crtc, src_w, src_h,
> >>>>> pixel_size, true,
> >>>>> @@ -283,10 +298,26 @@ skl_update_plane(struct drm_plane *drm_plane,
> >>>>> struct drm_crtc *crtc,
> >>>>>
> >>>>> surf_addr = intel_plane_obj_offset(intel_plane, obj);
> >>>>>
> >>>>> - I915_WRITE(PLANE_OFFSET(pipe, plane), (y << 16) | x);
> >>>>> - I915_WRITE(PLANE_STRIDE(pipe, plane), fb->pitches[0] /
> >>>>> stride_div);
> >>>>> + if (intel_rotation_90_or_270(rotation)) {
> >>>>> + /* stride: Surface height in tiles */
> >>>>> + tile_height = intel_tile_height(dev, fb->bits_per_pixel,
> >>>>> +
> >>>>> fb->modifier[0]);
> >>>>> + stride = DIV_ROUND_UP(fb->height, tile_height);
> >>>>> + plane_size = (src_w << 16) | src_h;
> >>>>> + x_offset = stride * tile_height - y - (src_h + 1);
> >>>>> + y_offset = x;
> >>>>> + } else {
> >>>>> + stride = fb->pitches[0] / stride_div;
> >>>>> + plane_size = (src_h << 16) | src_w;
> >>>>> + x_offset = x;
> >>>>> + y_offset = y;
> >>>>> + }
> >>>>> + plane_offset = y_offset << 16 | x_offset;
> >>>>> +
> >>>>> + I915_WRITE(PLANE_OFFSET(pipe, plane), plane_offset);
> >>>>> + I915_WRITE(PLANE_STRIDE(pipe, plane), stride);
> >>>>> I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x);
> >>>>> - I915_WRITE(PLANE_SIZE(pipe, plane), (crtc_h << 16) | crtc_w);
> >>>>> + I915_WRITE(PLANE_SIZE(pipe, plane), plane_size);
> >>>>> I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
> >>>>> I915_WRITE(PLANE_SURF(pipe, plane), surf_addr);
> >>>>> POSTING_READ(PLANE_SURF(pipe, plane));
> >>>>> @@ -1310,16 +1341,7 @@ intel_plane_init(struct drm_device *dev, enum
> >>>>> pipe pipe, int plane)
> >>>>> goto out;
> >>>>> }
> >>>>>
> >>>>> - if (!dev->mode_config.rotation_property)
> >>>>> - dev->mode_config.rotation_property =
> >>>>> - drm_mode_create_rotation_property(dev,
> >>>>> -
> >>>>> BIT(DRM_ROTATE_0) |
> >>>>> -
> >>>>> BIT(DRM_ROTATE_180));
> >>>>> -
> >>>>> - if (dev->mode_config.rotation_property)
> >>>>> - drm_object_attach_property(&intel_plane->base.base,
> >>>>> -
> >>>>> dev->mode_config.rotation_property,
> >>>>> - state->base.rotation);
> >>>>> + intel_create_rotation_property(dev, intel_plane);
> >>>>>
> >>>>> drm_plane_helper_add(&intel_plane->base,
> >>>>> &intel_plane_helper_funcs);
> >>>>>
> >>>>> --
> >>>>> 1.7.10.4
> >>>>>
> >>>>> _______________________________________________
> >>>>> Intel-gfx mailing list
> >>>>> [email protected]
> >>>>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> >>>>
> >>>> --
> >>>> Daniel Vetter
> >>>> Software Engineer, Intel Corporation
> >>>> http://blog.ffwll.ch
> >>>> _______________________________________________
> >>>> Intel-gfx mailing list
> >>>> [email protected]
> >>>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> >>>
> >
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
