On Mon, 2014-04-21 at 13:34 +0530, [email protected] wrote: > From: Deepak S <[email protected]> > > v2: Configure PCBR if BIOS fails allocate pcbr (deepak) > > v3: Fix PCBR condition check during CHV RC6 Enable flag set > > Signed-off-by: Deepak S <[email protected]> > --- > drivers/gpu/drm/i915/i915_reg.h | 1 + > drivers/gpu/drm/i915/intel_pm.c | 100 > +++++++++++++++++++++++++++++++++++++++- > 2 files changed, 99 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h > index b951d61..7090b42 100644 > --- a/drivers/gpu/drm/i915/i915_reg.h > +++ b/drivers/gpu/drm/i915/i915_reg.h > @@ -5134,6 +5134,7 @@ enum punit_power_well { > #define GEN6_GT_GFX_RC6 0x138108 > #define GEN6_GT_GFX_RC6p 0x13810C > #define GEN6_GT_GFX_RC6pp 0x138110 > +#define VLV_PCBR_ADDR_SHIFT 12 > > #define GEN6_PCODE_MAILBOX 0x138124 > #define GEN6_PCODE_READY (1<<31) > diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c > index f3c5bce..421a4cc 100644 > --- a/drivers/gpu/drm/i915/intel_pm.c > +++ b/drivers/gpu/drm/i915/intel_pm.c > @@ -3264,6 +3264,18 @@ static void gen6_disable_rps(struct drm_device *dev) > gen6_disable_rps_interrupts(dev); > } > > +static void cherryview_disable_rps(struct drm_device *dev) > +{ > + struct drm_i915_private *dev_priv = dev->dev_private; > + > + I915_WRITE(GEN6_RC_CONTROL, 0); > + > + if (dev_priv->vlv_pctx) { > + drm_gem_object_unreference(&dev_priv->vlv_pctx->base); > + dev_priv->vlv_pctx = NULL; > + } > +} > + > static void valleyview_disable_rps(struct drm_device *dev) > { > struct drm_i915_private *dev_priv = dev->dev_private; > @@ -3642,6 +3654,28 @@ static void valleyview_check_pctx(struct > drm_i915_private *dev_priv) > dev_priv->vlv_pctx->stolen->start); > } > > +static void cherryview_setup_pctx(struct drm_device *dev) > +{ > + struct drm_i915_private *dev_priv = dev->dev_private; > + unsigned long pctx_paddr; > + struct i915_gtt *gtt = &dev_priv->gtt; > + u32 pcbr; > + int pctx_size = 32*1024; > + > + pcbr = I915_READ(VLV_PCBR); > + if ((pcbr >> VLV_PCBR_ADDR_SHIFT) == 0) { > + /* > + * From the Gunit register HAS: > + * The Gfx driver is expected to program this register and > ensure > + * proper allocation within Gfx stolen memory. For example, > this > + * register should be programmed such than the PCBR range does > not > + * overlap with other relevant ranges. > + */ > + pctx_paddr = (dev_priv->mm.stolen_base + gtt->stolen_size - > pctx_size);
This area should be reserved.
> + I915_WRITE(VLV_PCBR, pctx_paddr);
> + }
> +}
> +
> static void valleyview_setup_pctx(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -3697,6 +3731,61 @@ static void valleyview_cleanup_pctx(struct drm_device
> *dev)
> dev_priv->vlv_pctx = NULL;
> }
>
> +static void cherryview_enable_rps(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_ring_buffer *ring;
> + u32 gtfifodbg, rc6_mode = 0, pcbr;
> + int i;
> +
> + WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
> +
> + if ((gtfifodbg = I915_READ(GTFIFODBG))) {
> + DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n",
> + gtfifodbg);
> + I915_WRITE(GTFIFODBG, gtfifodbg);
> + }
> +
> + cherryview_setup_pctx(dev);
This should be called from intel_init_gt_powersave().
> +
> + /* 1a & 1b: Get forcewake during program sequence. Although the driver
> + * hasn't enabled a state yet where we need forcewake, BIOS may have.*/
> + gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
> +
> + /* 2a: Program RC6 thresholds.*/
> + I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
> + I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
> + I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
> +
> + for_each_ring(ring, dev_priv, i)
> + I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
> +
> + I915_WRITE(GEN6_RC6_THRESHOLD, 50000); /* 50/125ms per EI */
> +
> + /* allows RC6 residency counter to work */
> + I915_WRITE(VLV_COUNTER_CONTROL,
> + _MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH |
> + VLV_MEDIA_RC6_COUNT_EN |
> + VLV_RENDER_RC6_COUNT_EN));
> +
> + /* Todo: If BIOS has not configured PCBR
> + * then allocate in BIOS Reserved */
> +
> + /* For now we assume BIOS is allocating and populating the PCBR */
> + pcbr = I915_READ(VLV_PCBR);
> +
> + DRM_DEBUG_DRIVER("PCBR offset : 0x%x\n", pcbr);
> +
> + /* 3: Enable RC6 */
> + if ((intel_enable_rc6(dev) & INTEL_RC6_ENABLE) &&
> + (pcbr >> VLV_PCBR_ADDR_SHIFT))
This may break runtime PM, if PCBR isn't setup, since we assume that if
intel_enable_rc6() returns a non-zero value RC6 will be truly enabled.
So the check for PCBR should be moved to sanitize_rc6_option(). Also
note that for CHV PCBR setup cannot fail atm.
> + rc6_mode = GEN6_RC_CTL_EI_MODE(1) | VLV_RC_CTL_CTX_RST_PARALLEL;
> +
> + I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
> +
> + gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL);
> +}
> +
> static void valleyview_enable_rps(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -4550,7 +4639,9 @@ void intel_disable_gt_powersave(struct drm_device *dev)
> cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
> cancel_work_sync(&dev_priv->rps.work);
> mutex_lock(&dev_priv->rps.hw_lock);
> - if (IS_VALLEYVIEW(dev))
> + if (IS_CHERRYVIEW(dev))
> + cherryview_disable_rps(dev);
> + else if (IS_VALLEYVIEW(dev))
> valleyview_disable_rps(dev);
> else
> gen6_disable_rps(dev);
> @@ -4568,7 +4659,9 @@ static void intel_gen6_powersave_work(struct
> work_struct *work)
>
> mutex_lock(&dev_priv->rps.hw_lock);
>
> - if (IS_VALLEYVIEW(dev)) {
> + if (IS_CHERRYVIEW(dev)) {
> + cherryview_enable_rps(dev);
> + } else if (IS_VALLEYVIEW(dev)) {
> valleyview_enable_rps(dev);
> } else if (IS_BROADWELL(dev)) {
> gen8_enable_rps(dev);
> @@ -4590,6 +4683,8 @@ void intel_enable_gt_powersave(struct drm_device *dev)
> ironlake_enable_rc6(dev);
> intel_init_emon(dev);
> } else if (IS_GEN6(dev) || IS_GEN7(dev)) {
> + if (IS_VALLEYVIEW(dev))
> + valleyview_setup_pctx(dev);
Spurious hunk, as Ben pointed out, and the GEN check will be false for
CherryView. The corresponding GEN check must be updated in
intel_disable_gt_powersave() too.
> /*
> * PCU communication is slow and this doesn't need to be
> * done at any specific time, so do this out of our fast path
> @@ -5175,6 +5270,7 @@ static void valleyview_init_clock_gating(struct
> drm_device *dev)
> dev_priv->mem_freq = 1333;
> break;
> }
> +
> DRM_DEBUG_DRIVER("DDR speed: %d MHz", dev_priv->mem_freq);
>
> dev_priv->vlv_cdclk_freq = valleyview_cur_cdclk(dev_priv);
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
