From: Ville Syrjälä <[email protected]> Apparently ICL may hang with an MCE if we write TRANS_VRR_VMAX/FLIPLINE before enabling TRANS_DDI_FUNC_CTL.
Personally I was only able to reproduce a hang (on an Dell XPS 7390 2-in-1) with an external display connected via a dock using a dodgy type-C cable that made the link training fail. After the failed link training the machine would hang. TGL seemed immune to the problem for whatever reason. BSpec does tell us to configure VRR after enabling TRANS_DDI_FUNC_CTL as well. The DMC firmware also does the VRR restore in two stages: - first stage seems to be unconditional and includes TRANS_VRR_CTL and a few other VRR registers, among other things - second stage is conditional on the DDI being enabled, and includes TRANS_DDI_FUNC_CTL and TRANS_VRR_VMAX/VMIN/FLIPLINE, among other things So let's reorder the steps to match to avoid the hang, and toss in an extra WARN to make sure we don't screw this up later. BSpec: 22243 Cc: [email protected] Cc: Ankit Nautiyal <[email protected]> Reported-by: Benjamin Tissoires <[email protected]> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15777 Tested-by: Benjamin Tissoires <[email protected]> Fixes: dda7dcd9da73 ("drm/i915/vrr: Use fixed timings for platforms that support VRR") Signed-off-by: Ville Syrjälä <[email protected]> --- drivers/gpu/drm/i915/display/intel_display.c | 1 - drivers/gpu/drm/i915/display/intel_vrr.c | 14 ++++++++++++++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index 27354585ba92..138ee7dd1977 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -1637,7 +1637,6 @@ static void hsw_configure_cpu_transcoder(const struct intel_crtc_state *crtc_sta } intel_set_transcoder_timings(crtc_state); - intel_vrr_set_transcoder_timings(crtc_state); if (cpu_transcoder != TRANSCODER_EDP) intel_de_write(display, TRANS_MULT(display, cpu_transcoder), diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c index 00ca76dbdd6c..8a957804cb97 100644 --- a/drivers/gpu/drm/i915/display/intel_vrr.c +++ b/drivers/gpu/drm/i915/display/intel_vrr.c @@ -599,6 +599,18 @@ void intel_vrr_set_transcoder_timings(const struct intel_crtc_state *crtc_state) if (!HAS_VRR(display)) return; + /* + * Bspec says: + * "(note: VRR needs to be programmed after + * TRANS_DDI_FUNC_CTL and before TRANS_CONF)." + * + * In practice it turns out that ICL can hang if + * TRANS_VRR_VMAX/FLIPLINE are written before + * enabling TRANS_DDI_FUNC_CTL. + */ + drm_WARN_ON(display->drm, + !(intel_de_read(display, TRANS_DDI_FUNC_CTL(display, cpu_transcoder)) & TRANS_DDI_FUNC_ENABLE)); + /* * This bit seems to have two meanings depending on the platform: * TGL: generate VRR "safe window" for DSB vblank waits @@ -961,6 +973,8 @@ void intel_vrr_transcoder_enable(const struct intel_crtc_state *crtc_state) { struct intel_display *display = to_intel_display(crtc_state); + intel_vrr_set_transcoder_timings(crtc_state); + if (!intel_vrr_possible(crtc_state)) return; -- 2.52.0
