On Fri, Jan 31, 2025 at 02:50:04PM +0200, Jani Nikula wrote:
> Just use ints unless there are actual reasons to do otherwise. Here,
> there are not.
> 
> Signed-off-by: Jani Nikula <[email protected]>
> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c 
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index 7a8a4df1bf1e..7c6d277729d0 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -1926,7 +1926,7 @@ static bool intel_dp_dsc_supports_format(const struct 
> intel_connector *connector
>       return drm_dp_dsc_sink_supports_format(connector->dp.dsc_dpcd, 
> sink_dsc_format);
>  }
>  
> -static bool is_bw_sufficient_for_dsc_config(u16 compressed_bppx16, u32 
> link_clock,
> +static bool is_bw_sufficient_for_dsc_config(int dsc_bpp_x16, u32 link_clock,
>                                           u32 lane_count, u32 mode_clock,
>                                           enum intel_output_format 
> output_format,
>                                           int timeslots)
> @@ -1934,7 +1934,7 @@ static bool is_bw_sufficient_for_dsc_config(u16 
> compressed_bppx16, u32 link_cloc
>       u32 available_bw, required_bw;
>  
>       available_bw = (link_clock * lane_count * timeslots * 16)  / 8;
> -     required_bw = compressed_bppx16 * 
> (intel_dp_mode_to_fec_clock(mode_clock));
> +     required_bw = dsc_bpp_x16 * (intel_dp_mode_to_fec_clock(mode_clock));

This reduces the range for dsc_bpp_x16 and mode_clock where the above
multiply won't overflow, but afaics with the current max values of those
this is still ok:

Reviewed-by: Imre Deak <[email protected]>

>  
>       return available_bw > required_bw;
>  }
> @@ -1942,7 +1942,7 @@ static bool is_bw_sufficient_for_dsc_config(u16 
> compressed_bppx16, u32 link_cloc
>  static int dsc_compute_link_config(struct intel_dp *intel_dp,
>                                  struct intel_crtc_state *pipe_config,
>                                  const struct link_config_limits *limits,
> -                                u16 compressed_bppx16,
> +                                int dsc_bpp_x16,
>                                  int timeslots)
>  {
>       const struct drm_display_mode *adjusted_mode = 
> &pipe_config->hw.adjusted_mode;
> @@ -1957,7 +1957,7 @@ static int dsc_compute_link_config(struct intel_dp 
> *intel_dp,
>               for (lane_count = limits->min_lane_count;
>                    lane_count <= limits->max_lane_count;
>                    lane_count <<= 1) {
> -                     if (!is_bw_sufficient_for_dsc_config(compressed_bppx16, 
> link_rate,
> +                     if (!is_bw_sufficient_for_dsc_config(dsc_bpp_x16, 
> link_rate,
>                                                            lane_count, 
> adjusted_mode->clock,
>                                                            
> pipe_config->output_format,
>                                                            timeslots))
> -- 
> 2.39.5
> 

Reply via email to