From: Ville Syrjälä <[email protected]> If the driver doesn't call pci_save_state() driver/pci will normally save+power manage the device from the _noirq() pm hooks.
We can't let that happen as some old BIOSes fail to hibernate when the device is in D3. However, we can get a bit closer to the standard behaviour by doing our explicit pci_save_state() and pci_set_power_state() stuff from driver provided _noirq() hooks as well. This results in a change of behaviur where we no longer go into D3 at the end of .freeze_late(), so when it comes time to .thaw() we'll already be in D0, and thus we can drop the explicit pci_set_power_state(D0) call. Presumable swictcheroo suspend will want to go into D3 so call the _noirq() stuff from the switcheroo suspend hook, and since we dropped the pci_set_power_state(D0) from .resume_early() we'll need to add one back into the swtcheroo resume hook. Cc: Bjorn Helgaas <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Ville Syrjälä <[email protected]> --- drivers/gpu/drm/i915/i915_driver.c | 76 ++++++++++++++++++++---------- 1 file changed, 51 insertions(+), 25 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_driver.c b/drivers/gpu/drm/i915/i915_driver.c index 1e5abf72dfc4..fe7c34045794 100644 --- a/drivers/gpu/drm/i915/i915_driver.c +++ b/drivers/gpu/drm/i915/i915_driver.c @@ -1097,6 +1097,21 @@ static int i915_drm_suspend_late(struct drm_device *dev, bool hibernation) pci_disable_device(pdev); + return 0; + +fail: + enable_rpm_wakeref_asserts(rpm); + if (!dev_priv->uncore.user_forcewake_count) + intel_runtime_pm_driver_release(rpm); + + return ret; +} + +static int i915_drm_suspend_noirq(struct drm_device *dev, bool hibernation) +{ + struct drm_i915_private *dev_priv = to_i915(dev); + struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); + /* * During hibernation on some platforms the BIOS may try to access * the device even though it's already in D3 and hang the machine. So @@ -1117,13 +1132,6 @@ static int i915_drm_suspend_late(struct drm_device *dev, bool hibernation) pci_set_power_state(pdev, PCI_D3hot); return 0; - -fail: - enable_rpm_wakeref_asserts(rpm); - if (!dev_priv->uncore.user_forcewake_count) - intel_runtime_pm_driver_release(rpm); - - return ret; } int i915_driver_suspend_switcheroo(struct drm_i915_private *i915, @@ -1142,7 +1150,15 @@ int i915_driver_suspend_switcheroo(struct drm_i915_private *i915, if (error) return error; - return i915_drm_suspend_late(&i915->drm, false); + error = i915_drm_suspend_late(&i915->drm, false); + if (error) + return error; + + error = i915_drm_suspend_noirq(&i915->drm, false); + if (error) + return error; + + return 0; } static int i915_drm_resume(struct drm_device *dev) @@ -1246,23 +1262,6 @@ static int i915_drm_resume_early(struct drm_device *dev) * similar so that power domains can be employed. */ - /* - * Note that we need to set the power state explicitly, since we - * powered off the device during freeze and the PCI core won't power - * it back up for us during thaw. Powering off the device during - * freeze is not a hard requirement though, and during the - * suspend/resume phases the PCI core makes sure we get here with the - * device powered on. So in case we change our freeze logic and keep - * the device powered we can also remove the following set power state - * call. - */ - ret = pci_set_power_state(pdev, PCI_D0); - if (ret) { - drm_err(&dev_priv->drm, - "failed to set PCI D0 power state (%d)\n", ret); - return ret; - } - /* * Note that pci_enable_device() first enables any parent bridge * device and only then sets the power state for this device. The @@ -1302,11 +1301,16 @@ static int i915_drm_resume_early(struct drm_device *dev) int i915_driver_resume_switcheroo(struct drm_i915_private *i915) { + struct pci_dev *pdev = to_pci_dev(i915->drm.dev); int ret; if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) return 0; + ret = pci_set_power_state(pdev, PCI_D0); + if (ret) + return ret; + ret = i915_drm_resume_early(&i915->drm); if (ret) return ret; @@ -1363,6 +1367,16 @@ static int i915_pm_suspend_late(struct device *kdev) return i915_drm_suspend_late(&i915->drm, false); } +static int i915_pm_suspend_noirq(struct device *kdev) +{ + struct drm_i915_private *i915 = kdev_to_i915(kdev); + + if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) + return 0; + + return i915_drm_suspend_noirq(&i915->drm, false); +} + static int i915_pm_poweroff_late(struct device *kdev) { struct drm_i915_private *i915 = kdev_to_i915(kdev); @@ -1373,6 +1387,16 @@ static int i915_pm_poweroff_late(struct device *kdev) return i915_drm_suspend_late(&i915->drm, true); } +static int i915_pm_poweroff_noirq(struct device *kdev) +{ + struct drm_i915_private *i915 = kdev_to_i915(kdev); + + if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) + return 0; + + return i915_drm_suspend_noirq(&i915->drm, true); +} + static int i915_pm_resume_early(struct device *kdev) { struct drm_i915_private *i915 = kdev_to_i915(kdev); @@ -1638,6 +1662,7 @@ const struct dev_pm_ops i915_pm_ops = { .prepare = i915_pm_prepare, .suspend = i915_pm_suspend, .suspend_late = i915_pm_suspend_late, + .suspend_noirq = i915_pm_suspend_noirq, .resume_early = i915_pm_resume_early, .resume = i915_pm_resume, .complete = i915_pm_complete, @@ -1663,6 +1688,7 @@ const struct dev_pm_ops i915_pm_ops = { .thaw = i915_pm_thaw, .poweroff = i915_pm_suspend, .poweroff_late = i915_pm_poweroff_late, + .poweroff_noirq = i915_pm_poweroff_noirq, .restore_early = i915_pm_restore_early, .restore = i915_pm_restore, -- 2.44.2
