> -----Original Message----- > From: Nikula, Jani <[email protected]> > Sent: Wednesday, April 19, 2023 12:48 PM > To: Murthy, Arun R <[email protected]>; intel- > [email protected] > Cc: Murthy, Arun R <[email protected]> > Subject: Re: [RESEND PATCHv2] drm/i915/display/dp: 128/132b LT > requirement > > On Wed, 19 Apr 2023, Arun R Murthy <[email protected]> wrote: > > For 128b/132b LT prior to LT DPTX should set power state, DP channel > > coding and then link rate. > > > > v2: added separate function to avoid code duplication(Jani N) > > > > Signed-off-by: Arun R Murthy <[email protected]> > > RESEND for what reason? Typo is sending V2 patch hence corrected and sent it again.
> > Two v2 and neither fixes > https://lore.kernel.org/r/[email protected] This is pointing to the v1 patch. V2 patch addressing review comments can be located @ https://lore.kernel.org/all/[email protected]/ Thanks and Regards, Arun R Murthy -------------------- > > BR, > Jani. > > > > --- > > .../drm/i915/display/intel_dp_link_training.c | 62 > > +++++++++++++------ > > 1 file changed, 44 insertions(+), 18 deletions(-) > > > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c > > b/drivers/gpu/drm/i915/display/intel_dp_link_training.c > > index 6aa4ae5e7ebe..e5809cf7d0c4 100644 > > --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c > > +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c > > @@ -637,6 +637,37 @@ static bool > intel_dp_link_max_vswing_reached(struct intel_dp *intel_dp, > > return true; > > } > > > > +static void > > +intel_dp_update_downspread_ctrl(struct intel_dp *intel_dp, > > + const struct intel_crtc_state *crtc_state) { > > + u8 link_config[2]; > > + > > + link_config[0] = crtc_state->vrr.flipline ? > DP_MSA_TIMING_PAR_IGNORE_EN : 0; > > + link_config[1] = intel_dp_is_uhbr(crtc_state) ? > > + DP_SET_ANSI_128B132B : DP_SET_ANSI_8B10B; > > + drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, > link_config, > > +2); } > > + > > +static void > > +intel_dp_update_link_bw_set(struct intel_dp *intel_dp, > > + const struct intel_crtc_state *crtc_state, > > + u8 link_bw, u8 rate_select) > > +{ > > + u8 link_config[2]; > > + > > + /* Write the link configuration data */ > > + link_config[0] = link_bw; > > + link_config[1] = crtc_state->lane_count; > > + if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) > > + link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; > > + drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, > 2); > > + /* eDP 1.4 rate select method. */ > > + if (!link_bw) > > + drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_RATE_SET, > > + &rate_select, 1); > > +} > > + > > /* > > * Prepare link training by configuring the link parameters. On DDI > platforms > > * also enable the port here. > > @@ -647,7 +678,6 @@ intel_dp_prepare_link_train(struct intel_dp > > *intel_dp, { > > struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; > > struct drm_i915_private *i915 = to_i915(encoder->base.dev); > > - u8 link_config[2]; > > u8 link_bw, rate_select; > > > > if (intel_dp->prepare_link_retrain) > > @@ -686,23 +716,19 @@ intel_dp_prepare_link_train(struct intel_dp > *intel_dp, > > drm_dbg_kms(&i915->drm, > > "[ENCODER:%d:%s] Using LINK_RATE_SET value > %02x\n", > > encoder->base.base.id, encoder->base.name, > rate_select); > > - > > - /* Write the link configuration data */ > > - link_config[0] = link_bw; > > - link_config[1] = crtc_state->lane_count; > > - if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) > > - link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; > > - drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, > 2); > > - > > - /* eDP 1.4 rate select method. */ > > - if (!link_bw) > > - drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_RATE_SET, > > - &rate_select, 1); > > - > > - link_config[0] = crtc_state->vrr.flipline ? > DP_MSA_TIMING_PAR_IGNORE_EN : 0; > > - link_config[1] = intel_dp_is_uhbr(crtc_state) ? > > - DP_SET_ANSI_128B132B : DP_SET_ANSI_8B10B; > > - drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, > link_config, 2); > > + if (intel_dp_is_uhbr(crtc_state)) { > > + /* > > + * Spec DP2.1 Section 3.5.2.16 > > + * Prior to LT DPTX should set 128b/132b DP Channel coding > and then set link rate > > + */ > > + intel_dp_update_downspread_ctrl(intel_dp, crtc_state); > > + intel_dp_update_link_bw_set(intel_dp, crtc_state, link_bw, > > + rate_select); > > + } else { > > + intel_dp_update_link_bw_set(intel_dp, crtc_state, link_bw, > > + rate_select); > > + intel_dp_update_downspread_ctrl(intel_dp, crtc_state); > > + } > > > > return true; > > } > > -- > Jani Nikula, Intel Open Source Graphics Center
