>What precisely does this fix? All our register access is already wrapped in >get/put calls, so I'm a bit confused ... Is this to work around hw issues, or >is this what the bios expects when going into suspend?
Yes Daniel, this was sequence recommended when going into suspend/Resume path. -----Original Message----- From: Daniel Vetter [mailto:[email protected]] On Behalf Of Daniel Vetter Sent: Monday, December 9, 2013 1:31 PM To: S, Deepak Cc: [email protected] Subject: Re: [Intel-gfx] [PATCH 2/3] drm/i915: Bring UP Power Wells before disabling RC6. On Sun, Dec 08, 2013 at 01:52:46PM +0530, [email protected] wrote: > From: Deepak S <[email protected]> > > Instead of waiting for HW to bringup the wells, We force the wells up > before disabling RC6. This is to avoid any register access when wells > are down. > > Signed-off-by: Deepak S <[email protected]> > --- > drivers/gpu/drm/i915/intel_pm.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/gpu/drm/i915/intel_pm.c > b/drivers/gpu/drm/i915/intel_pm.c index 2e1340f..089712a 100644 > --- a/drivers/gpu/drm/i915/intel_pm.c > +++ b/drivers/gpu/drm/i915/intel_pm.c > @@ -3661,6 +3661,12 @@ static void gen6_disable_rps(struct drm_device > *dev) static void valleyview_disable_rps(struct drm_device *dev) { > struct drm_i915_private *dev_priv = dev->dev_private; > + unsigned long irqflags; > + > + /* We need to bring up the wells before disabling the RC6 */ > + spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); > + dev_priv->uncore.funcs.force_wake_get(dev_priv, FORCEWAKE_ALL); > + spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); What precisely does this fix? All our register access is already wrapped in get/put calls, so I'm a bit confused ... Is this to work around hw issues, or is this what the bios expects when going into suspend? -Daniel > > I915_WRITE(GEN6_RC_CONTROL, 0); > > -- > 1.8.4.2 > > _______________________________________________ > Intel-gfx mailing list > [email protected] > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
