On Tue, 03 May 2022, Ville Syrjala <[email protected]> wrote: > From: Ville Syrjälä <[email protected]> > > Rename some of the 'pipe_config's to the more modern > 'crtc_state'. > > Signed-off-by: Ville Syrjälä <[email protected]>
Reviewed-by: Jani Nikula <[email protected]> > --- > drivers/gpu/drm/i915/display/intel_display.c | 62 ++++++++++---------- > 1 file changed, 31 insertions(+), 31 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c > b/drivers/gpu/drm/i915/display/intel_display.c > index 4615cf3564eb..ac476976dc0b 100644 > --- a/drivers/gpu/drm/i915/display/intel_display.c > +++ b/drivers/gpu/drm/i915/display/intel_display.c > @@ -5013,10 +5013,10 @@ static void > intel_modeset_update_connector_atomic_state(struct drm_device *dev) > > static int > compute_sink_pipe_bpp(const struct drm_connector_state *conn_state, > - struct intel_crtc_state *pipe_config) > + struct intel_crtc_state *crtc_state) > { > struct drm_connector *connector = conn_state->connector; > - struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev); > + struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); > const struct drm_display_info *info = &connector->display_info; > int bpp; > > @@ -5038,16 +5038,16 @@ compute_sink_pipe_bpp(const struct > drm_connector_state *conn_state, > return -EINVAL; > } > > - if (bpp < pipe_config->pipe_bpp) { > + if (bpp < crtc_state->pipe_bpp) { > drm_dbg_kms(&i915->drm, > "[CONNECTOR:%d:%s] Limiting display bpp to %d > instead of " > "EDID bpp %d, requested bpp %d, max platform bpp > %d\n", > connector->base.id, connector->name, > bpp, 3 * info->bpc, > 3 * conn_state->max_requested_bpc, > - pipe_config->pipe_bpp); > + crtc_state->pipe_bpp); > > - pipe_config->pipe_bpp = bpp; > + crtc_state->pipe_bpp = bpp; > } > > return 0; > @@ -5058,7 +5058,7 @@ compute_baseline_pipe_bpp(struct intel_atomic_state > *state, > struct intel_crtc *crtc) > { > struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); > - struct intel_crtc_state *pipe_config = > + struct intel_crtc_state *crtc_state = > intel_atomic_get_new_crtc_state(state, crtc); > struct drm_connector *connector; > struct drm_connector_state *connector_state; > @@ -5072,7 +5072,7 @@ compute_baseline_pipe_bpp(struct intel_atomic_state > *state, > else > bpp = 8*3; > > - pipe_config->pipe_bpp = bpp; > + crtc_state->pipe_bpp = bpp; > > /* Clamp display bpp to connector max bpp */ > for_each_new_connector_in_state(&state->base, connector, > connector_state, i) { > @@ -5081,7 +5081,7 @@ compute_baseline_pipe_bpp(struct intel_atomic_state > *state, > if (connector_state->crtc != &crtc->base) > continue; > > - ret = compute_sink_pipe_bpp(connector_state, pipe_config); > + ret = compute_sink_pipe_bpp(connector_state, crtc_state); > if (ret) > return ret; > } > @@ -5638,7 +5638,7 @@ intel_modeset_pipe_config(struct intel_atomic_state > *state, > struct intel_crtc *crtc) > { > struct drm_i915_private *i915 = to_i915(crtc->base.dev); > - struct intel_crtc_state *pipe_config = > + struct intel_crtc_state *crtc_state = > intel_atomic_get_new_crtc_state(state, crtc); > struct drm_connector *connector; > struct drm_connector_state *connector_state; > @@ -5646,28 +5646,28 @@ intel_modeset_pipe_config(struct intel_atomic_state > *state, > int base_bpp, ret, i; > bool retry = true; > > - pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe; > + crtc_state->cpu_transcoder = (enum transcoder) crtc->pipe; > > - pipe_config->framestart_delay = 1; > + crtc_state->framestart_delay = 1; > > /* > * Sanitize sync polarity flags based on requested ones. If neither > * positive or negative polarity is requested, treat this as meaning > * negative polarity. > */ > - if (!(pipe_config->hw.adjusted_mode.flags & > + if (!(crtc_state->hw.adjusted_mode.flags & > (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC))) > - pipe_config->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC; > + crtc_state->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC; > > - if (!(pipe_config->hw.adjusted_mode.flags & > + if (!(crtc_state->hw.adjusted_mode.flags & > (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC))) > - pipe_config->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC; > + crtc_state->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC; > > ret = compute_baseline_pipe_bpp(state, crtc); > if (ret) > return ret; > > - base_bpp = pipe_config->pipe_bpp; > + base_bpp = crtc_state->pipe_bpp; > > /* > * Determine the real pipe dimensions. Note that stereo modes can > @@ -5677,9 +5677,9 @@ intel_modeset_pipe_config(struct intel_atomic_state > *state, > * computation to clearly distinguish it from the adjusted mode, which > * can be changed by the connectors in the below retry loop. > */ > - drm_mode_get_hv_timing(&pipe_config->hw.mode, > + drm_mode_get_hv_timing(&crtc_state->hw.mode, > &pipe_src_w, &pipe_src_h); > - drm_rect_init(&pipe_config->pipe_src, 0, 0, > + drm_rect_init(&crtc_state->pipe_src, 0, 0, > pipe_src_w, pipe_src_h); > > for_each_new_connector_in_state(&state->base, connector, > connector_state, i) { > @@ -5700,20 +5700,20 @@ intel_modeset_pipe_config(struct intel_atomic_state > *state, > * hooks so that the hooks can use this information safely. > */ > if (encoder->compute_output_type) > - pipe_config->output_types |= > - BIT(encoder->compute_output_type(encoder, > pipe_config, > + crtc_state->output_types |= > + BIT(encoder->compute_output_type(encoder, > crtc_state, > > connector_state)); > else > - pipe_config->output_types |= BIT(encoder->type); > + crtc_state->output_types |= BIT(encoder->type); > } > > encoder_retry: > /* Ensure the port clock defaults are reset when retrying. */ > - pipe_config->port_clock = 0; > - pipe_config->pixel_multiplier = 1; > + crtc_state->port_clock = 0; > + crtc_state->pixel_multiplier = 1; > > /* Fill in default crtc timings, allow encoders to overwrite them. */ > - drm_mode_set_crtcinfo(&pipe_config->hw.adjusted_mode, > + drm_mode_set_crtcinfo(&crtc_state->hw.adjusted_mode, > CRTC_STEREO_DOUBLE); > > /* Pass our mode to the connectors and the CRTC to give them a chance to > @@ -5727,7 +5727,7 @@ intel_modeset_pipe_config(struct intel_atomic_state > *state, > if (connector_state->crtc != &crtc->base) > continue; > > - ret = encoder->compute_config(encoder, pipe_config, > + ret = encoder->compute_config(encoder, crtc_state, > connector_state); > if (ret == -EDEADLK) > return ret; > @@ -5739,9 +5739,9 @@ intel_modeset_pipe_config(struct intel_atomic_state > *state, > > /* Set default port clock if not overwritten by the encoder. Needs to be > * done afterwards in case the encoder adjusts the mode. */ > - if (!pipe_config->port_clock) > - pipe_config->port_clock = > pipe_config->hw.adjusted_mode.crtc_clock > - * pipe_config->pixel_multiplier; > + if (!crtc_state->port_clock) > + crtc_state->port_clock = crtc_state->hw.adjusted_mode.crtc_clock > + * crtc_state->pixel_multiplier; > > ret = intel_crtc_compute_config(state, crtc); > if (ret == -EDEADLK) > @@ -5764,11 +5764,11 @@ intel_modeset_pipe_config(struct intel_atomic_state > *state, > * only enable it on 6bpc panels and when its not a compliance > * test requesting 6bpc video pattern. > */ > - pipe_config->dither = (pipe_config->pipe_bpp == 6*3) && > - !pipe_config->dither_force_disable; > + crtc_state->dither = (crtc_state->pipe_bpp == 6*3) && > + !crtc_state->dither_force_disable; > drm_dbg_kms(&i915->drm, > "hw max bpp: %i, pipe bpp: %i, dithering: %i\n", > - base_bpp, pipe_config->pipe_bpp, pipe_config->dither); > + base_bpp, crtc_state->pipe_bpp, crtc_state->dither); > > return 0; > } -- Jani Nikula, Intel Open Source Graphics Center
