Also add new fields in intel_dsi to have all dphy related parameters.
These will be useful even when we go for pure generic MIPI design
Yogesh Mohan Marimuthu <yogesh.mohan.marimu...@intel.com>
Signed-off-by: Shobhit Kumar <shobhit.ku...@intel.com>
---
drivers/gpu/drm/i915/intel_dsi.c | 9 ++++++++-
drivers/gpu/drm/i915/intel_dsi.h | 29 +++++++++++++++++++++++++++++
2 files changed, 37 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 9a2fdd2..34e19b7 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -147,6 +147,9 @@ static void intel_dsi_enable(struct intel_encoder *encoder)
DRM_DEBUG_KMS("\n");
+ if (intel_dsi->dev.dev_ops->panel_reset)
+ intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev);
+
temp = I915_READ(MIPI_DEVICE_READY(pipe));
if ((temp & DEVICE_READY) == 0) {
temp &= ~ULPS_STATE_MASK;
@@ -162,6 +165,9 @@ static void intel_dsi_enable(struct intel_encoder *encoder)
I915_WRITE(MIPI_DEVICE_READY(pipe), temp);
}
+ if (intel_dsi->dev.dev_ops->send_otp_cmds)
+ intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev);
+
if (is_cmd_mode(intel_dsi))
I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(pipe), 8 * 4);
@@ -176,7 +182,8 @@ static void intel_dsi_enable(struct intel_encoder *encoder)
POSTING_READ(MIPI_PORT_CTRL(pipe));
}
- intel_dsi->dev.dev_ops->enable(&intel_dsi->dev);
+ if (intel_dsi->dev.dev_ops->enable)
+ intel_dsi->dev.dev_ops->enable(&intel_dsi->dev);
}
static void intel_dsi_disable(struct intel_encoder *encoder)
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index c7765f3..b71c9b3 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -39,6 +39,13 @@ struct intel_dsi_device {
struct intel_dsi_dev_ops {
bool (*init)(struct intel_dsi_device *dsi);
+ void (*panel_reset)(struct intel_dsi_device *dsi);
+
+ void (*disable_panel_power)(struct intel_dsi_device *dsi);
+
+ /* send one time programmable commands */
+ void (*send_otp_cmds)(struct intel_dsi_device *dsi);
+
/* This callback must be able to assume DSI commands can be sent */
void (*enable)(struct intel_dsi_device *dsi);
@@ -89,6 +96,28 @@ struct intel_dsi {
/* eot for MIPI_EOT_DISABLE register */
u32 eot_disable;
+
+ u16 dsi_clock_freq;
+ u8 video_mode_type;
+ u32 data_width;
+ u8 dither;
+ u32 port_bits;
+ u8 escape_clk_div;
+ u32 lp_rx_timeout;
+ u8 turn_arnd_val;
+ u16 init_count;
+ u16 rst_timer_val;
+ u16 hs_to_lp_count;
+ u16 lp_byte_clk;
+ u32 bw_timer;
+ u16 clk_lp_to_hs_count;
+ u16 clk_hs_to_lp_count;
+ u32 video_frmt_cfg_bits;
+ u32 dphy_reg;
+
+ u8 backlight_off_delay; /*in ms*/
+ bool send_shutdown;
+ u8 shutdown_pkt_delay; /*in ms*/
};
static inline struct intel_dsi *enc_to_intel_dsi(struct drm_encoder *encoder)
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
