On Mon, Jul 22, 2013 at 08:05:10AM +0200, Daniel Vetter wrote:
> +static int hdmi_portclock_limit(struct intel_hdmi *hdmi)
> +{
> + struct drm_device *dev = intel_hdmi_to_dev(hdmi);
> +
> + if (IS_G4X(dev))
> + return 165000;
> + else if (IS_HASWELL(dev))
> + return 340000;
I read 300MHz in the BSpec?
> + else
> + return 225000;
> +}
> +
> static int intel_hdmi_mode_valid(struct drm_connector *connector,
> struct drm_display_mode *mode)
> {
> - if (mode->clock > 165000)
> + if (mode->clock > hdmi_portclock_limit(intel_attached_hdmi(connector)))
> return MODE_CLOCK_HIGH;
> if (mode->clock < 20000)
> return MODE_CLOCK_LOW;
> @@ -806,6 +818,7 @@ bool intel_hdmi_compute_config(struct intel_encoder
> *encoder,
> struct drm_device *dev = encoder->base.dev;
> struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
> int clock_12bpc = pipe_config->requested_mode.clock * 3 / 2;
> + int portclock_limit = hdmi_portclock_limit(intel_hdmi);
> int desired_bpp;
>
> if (intel_hdmi->color_range_auto) {
> @@ -829,7 +842,7 @@ bool intel_hdmi_compute_config(struct intel_encoder
> *encoder,
> * outputs. We also need to check that the higher clock still fits
> * within limits.
> */
> - if (pipe_config->pipe_bpp > 8*3 && clock_12bpc <= 225000
> + if (pipe_config->pipe_bpp > 8*3 && clock_12bpc <= portclock_limit
> && HAS_PCH_SPLIT(dev)) {
> DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
> desired_bpp = 12*3;
> @@ -846,7 +859,7 @@ bool intel_hdmi_compute_config(struct intel_encoder
> *encoder,
> pipe_config->pipe_bpp = desired_bpp;
> }
>
> - if (adjusted_mode->clock > 225000) {
> + if (adjusted_mode->clock > portclock_limit) {
> DRM_DEBUG_KMS("too high HDMI clock, rejecting mode\n");
> return false;
> }
> --
> 1.8.3.2
>
--
Damien
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
