Chris Wilson <[email protected]> writes:

> Always prime the page table registers before starting the ring. Even
> though we will update these to the per-context page tables during
> dispatch, it is prudent to ensure that the registers always point to a
> valid PD.
>
> Signed-off-by: Chris Wilson <[email protected]>
> Cc: Mika Kuoppala <[email protected]>
> ---
>  .../gpu/drm/i915/gt/intel_ring_submission.c   | 40 ++++++++++++-------
>  1 file changed, 26 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/gt/intel_ring_submission.c 
> b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
> index 42168d7cf5b5..f915a63e1110 100644
> --- a/drivers/gpu/drm/i915/gt/intel_ring_submission.c
> +++ b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
> @@ -635,6 +635,27 @@ static bool stop_ring(struct intel_engine_cs *engine)
>       return (ENGINE_READ(engine, RING_HEAD) & HEAD_ADDR) == 0;
>  }
>  
> +static struct i915_address_space *vm_alias(struct i915_address_space *vm)
> +{
> +     if (i915_is_ggtt(vm))
> +             vm = &i915_vm_to_ggtt(vm)->alias->vm;
> +
> +     return vm;
> +}
> +
> +static void set_pp_dir(struct intel_engine_cs *engine)
> +{
> +     struct i915_address_space *vm = vm_alias(engine->gt->vm);
> +
> +     if (vm) {
> +             struct i915_ppgtt *ppgtt = i915_vm_to_ppgtt(vm);
> +
> +             ENGINE_WRITE(engine, RING_PP_DIR_DCLV, PP_DIR_DCLV_2G);

I did think that for setup we set these zero first. But it seems
pointless. They should be zero after reset anywasy.

> +             ENGINE_WRITE(engine, RING_PP_DIR_BASE,
> +                          px_base(ppgtt->pd)->ggtt_offset << 10);

Shift for 16 and then index by cacheline so 16-6 it seems.

> +     }
> +}
> +
>  static int xcs_resume(struct intel_engine_cs *engine)
>  {
>       struct drm_i915_private *dev_priv = engine->i915;
> @@ -693,6 +714,8 @@ static int xcs_resume(struct intel_engine_cs *engine)
>       GEM_BUG_ON(!intel_ring_offset_valid(ring, ring->tail));
>       intel_ring_update_space(ring);
>  
> +     set_pp_dir(engine);
> +

Then rings are off and we start by setting up the pd.
Can't figure out a better spot.

Reviewed-by: Mika Kuoppala <[email protected]>

>       /* First wake the ring up to an empty/idle ring */
>       ENGINE_WRITE(engine, RING_HEAD, ring->head);
>       ENGINE_WRITE(engine, RING_TAIL, ring->head);
> @@ -1169,23 +1192,12 @@ static void ring_context_destroy(struct kref *ref)
>       intel_context_free(ce);
>  }
>  
> -static struct i915_address_space *vm_alias(struct intel_context *ce)
> -{
> -     struct i915_address_space *vm;
> -
> -     vm = ce->vm;
> -     if (i915_is_ggtt(vm))
> -             vm = &i915_vm_to_ggtt(vm)->alias->vm;
> -
> -     return vm;
> -}
> -
>  static int __context_pin_ppgtt(struct intel_context *ce)
>  {
>       struct i915_address_space *vm;
>       int err = 0;
>  
> -     vm = vm_alias(ce);
> +     vm = vm_alias(ce->vm);
>       if (vm)
>               err = gen6_ppgtt_pin(i915_vm_to_ppgtt((vm)));
>  
> @@ -1196,7 +1208,7 @@ static void __context_unpin_ppgtt(struct intel_context 
> *ce)
>  {
>       struct i915_address_space *vm;
>  
> -     vm = vm_alias(ce);
> +     vm = vm_alias(ce->vm);
>       if (vm)
>               gen6_ppgtt_unpin(i915_vm_to_ppgtt(vm));
>  }
> @@ -1553,7 +1565,7 @@ static int switch_context(struct i915_request *rq)
>  
>       GEM_BUG_ON(HAS_EXECLISTS(rq->i915));
>  
> -     ret = switch_mm(rq, vm_alias(ce));
> +     ret = switch_mm(rq, vm_alias(ce->vm));
>       if (ret)
>               return ret;
>  
> -- 
> 2.25.0
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to