On Tue, 21 Jan 2020, Ville Syrjala <[email protected]> wrote:
> From: Ville Syrjälä <[email protected]>
>
> Add the missing comma after the last initialized element
> of the hpd[] arrays. Best not give people bad ideas.
>
> Signed-off-by: Ville Syrjälä <[email protected]>

Reviewed-by: Jani Nikula <[email protected]>

> ---
>  drivers/gpu/drm/i915/i915_irq.c | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index afc6aad9bf8c..8091d58f0392 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -79,7 +79,7 @@ static const u32 hpd_ibx[HPD_NUM_PINS] = {
>       [HPD_SDVO_B] = SDE_SDVOB_HOTPLUG,
>       [HPD_PORT_B] = SDE_PORTB_HOTPLUG,
>       [HPD_PORT_C] = SDE_PORTC_HOTPLUG,
> -     [HPD_PORT_D] = SDE_PORTD_HOTPLUG
> +     [HPD_PORT_D] = SDE_PORTD_HOTPLUG,
>  };
>  
>  static const u32 hpd_cpt[HPD_NUM_PINS] = {
> @@ -87,7 +87,7 @@ static const u32 hpd_cpt[HPD_NUM_PINS] = {
>       [HPD_SDVO_B] = SDE_SDVOB_HOTPLUG_CPT,
>       [HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT,
>       [HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT,
> -     [HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT
> +     [HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT,
>  };
>  
>  static const u32 hpd_spt[HPD_NUM_PINS] = {
> @@ -95,7 +95,7 @@ static const u32 hpd_spt[HPD_NUM_PINS] = {
>       [HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT,
>       [HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT,
>       [HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT,
> -     [HPD_PORT_E] = SDE_PORTE_HOTPLUG_SPT
> +     [HPD_PORT_E] = SDE_PORTE_HOTPLUG_SPT,
>  };
>  
>  static const u32 hpd_mask_i915[HPD_NUM_PINS] = {
> @@ -104,7 +104,7 @@ static const u32 hpd_mask_i915[HPD_NUM_PINS] = {
>       [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_EN,
>       [HPD_PORT_B] = PORTB_HOTPLUG_INT_EN,
>       [HPD_PORT_C] = PORTC_HOTPLUG_INT_EN,
> -     [HPD_PORT_D] = PORTD_HOTPLUG_INT_EN
> +     [HPD_PORT_D] = PORTD_HOTPLUG_INT_EN,
>  };
>  
>  static const u32 hpd_status_g4x[HPD_NUM_PINS] = {
> @@ -113,7 +113,7 @@ static const u32 hpd_status_g4x[HPD_NUM_PINS] = {
>       [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_G4X,
>       [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
>       [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
> -     [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
> +     [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS,
>  };
>  
>  static const u32 hpd_status_i915[HPD_NUM_PINS] = {
> @@ -122,21 +122,21 @@ static const u32 hpd_status_i915[HPD_NUM_PINS] = {
>       [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I915,
>       [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
>       [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
> -     [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
> +     [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS,
>  };
>  
>  /* BXT hpd list */
>  static const u32 hpd_bxt[HPD_NUM_PINS] = {
>       [HPD_PORT_A] = BXT_DE_PORT_HP_DDIA,
>       [HPD_PORT_B] = BXT_DE_PORT_HP_DDIB,
> -     [HPD_PORT_C] = BXT_DE_PORT_HP_DDIC
> +     [HPD_PORT_C] = BXT_DE_PORT_HP_DDIC,
>  };
>  
>  static const u32 hpd_gen11[HPD_NUM_PINS] = {
>       [HPD_PORT_C] = GEN11_TC1_HOTPLUG | GEN11_TBT1_HOTPLUG,
>       [HPD_PORT_D] = GEN11_TC2_HOTPLUG | GEN11_TBT2_HOTPLUG,
>       [HPD_PORT_E] = GEN11_TC3_HOTPLUG | GEN11_TBT3_HOTPLUG,
> -     [HPD_PORT_F] = GEN11_TC4_HOTPLUG | GEN11_TBT4_HOTPLUG
> +     [HPD_PORT_F] = GEN11_TC4_HOTPLUG | GEN11_TBT4_HOTPLUG,
>  };
>  
>  static const u32 hpd_gen12[HPD_NUM_PINS] = {
> @@ -145,7 +145,7 @@ static const u32 hpd_gen12[HPD_NUM_PINS] = {
>       [HPD_PORT_F] = GEN11_TC3_HOTPLUG | GEN11_TBT3_HOTPLUG,
>       [HPD_PORT_G] = GEN11_TC4_HOTPLUG | GEN11_TBT4_HOTPLUG,
>       [HPD_PORT_H] = GEN12_TC5_HOTPLUG | GEN12_TBT5_HOTPLUG,
> -     [HPD_PORT_I] = GEN12_TC6_HOTPLUG | GEN12_TBT6_HOTPLUG
> +     [HPD_PORT_I] = GEN12_TC6_HOTPLUG | GEN12_TBT6_HOTPLUG,
>  };
>  
>  static const u32 hpd_icp[HPD_NUM_PINS] = {

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to