commit d916b1be94b6dc8d293abed2451f3062f6af7551
Author: Keith Busch <[email protected]>
Date: Thu May 23 09:27:35 2019 -0600
nvme-pci: use host managed power state for suspend
Bisected as cause of suspend failure for gem_eio/suspend on multiple kbl
hosts.
Cc: Rafael J. Wysocki <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Sagi Grimberg <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: [email protected]
---
drivers/nvme/host/pci.c | 95 ++---------------------------------------
1 file changed, 3 insertions(+), 92 deletions(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index db160cee42ad..bdc9e0625bb7 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -18,7 +18,6 @@
#include <linux/mutex.h>
#include <linux/once.h>
#include <linux/pci.h>
-#include <linux/suspend.h>
#include <linux/t10-pi.h>
#include <linux/types.h>
#include <linux/io-64-nonatomic-lo-hi.h>
@@ -111,7 +110,6 @@ struct nvme_dev {
u32 cmbsz;
u32 cmbloc;
struct nvme_ctrl ctrl;
- u32 last_ps;
mempool_t *iod_mempool;
@@ -2831,94 +2829,16 @@ static void nvme_remove(struct pci_dev *pdev)
}
#ifdef CONFIG_PM_SLEEP
-static int nvme_get_power_state(struct nvme_ctrl *ctrl, u32 *ps)
-{
- return nvme_get_features(ctrl, NVME_FEAT_POWER_MGMT, 0, NULL, 0, ps);
-}
-
-static int nvme_set_power_state(struct nvme_ctrl *ctrl, u32 ps)
-{
- return nvme_set_features(ctrl, NVME_FEAT_POWER_MGMT, ps, NULL, 0, NULL);
-}
-
-static int nvme_resume(struct device *dev)
-{
- struct nvme_dev *ndev = pci_get_drvdata(to_pci_dev(dev));
- struct nvme_ctrl *ctrl = &ndev->ctrl;
-
- if (pm_resume_via_firmware() || !ctrl->npss ||
- nvme_set_power_state(ctrl, ndev->last_ps) != 0)
- nvme_reset_ctrl(ctrl);
- return 0;
-}
-
static int nvme_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct nvme_dev *ndev = pci_get_drvdata(pdev);
- struct nvme_ctrl *ctrl = &ndev->ctrl;
- int ret = -EBUSY;
-
- /*
- * The platform does not remove power for a kernel managed suspend so
- * use host managed nvme power settings for lowest idle power if
- * possible. This should have quicker resume latency than a full device
- * shutdown. But if the firmware is involved after the suspend or the
- * device does not support any non-default power states, shut down the
- * device fully.
- */
- if (pm_suspend_via_firmware() || !ctrl->npss) {
- nvme_dev_disable(ndev, true);
- return 0;
- }
-
- nvme_start_freeze(ctrl);
- nvme_wait_freeze(ctrl);
- nvme_sync_queues(ctrl);
-
- if (ctrl->state != NVME_CTRL_LIVE &&
- ctrl->state != NVME_CTRL_ADMIN_ONLY)
- goto unfreeze;
-
- ndev->last_ps = 0;
- ret = nvme_get_power_state(ctrl, &ndev->last_ps);
- if (ret < 0)
- goto unfreeze;
-
- ret = nvme_set_power_state(ctrl, ctrl->npss);
- if (ret < 0)
- goto unfreeze;
-
- if (ret) {
- /*
- * Clearing npss forces a controller reset on resume. The
- * correct value will be resdicovered then.
- */
- nvme_dev_disable(ndev, true);
- ctrl->npss = 0;
- ret = 0;
- goto unfreeze;
- }
- /*
- * A saved state prevents pci pm from generically controlling the
- * device's power. If we're using protocol specific settings, we don't
- * want pci interfering.
- */
- pci_save_state(pdev);
-unfreeze:
- nvme_unfreeze(ctrl);
- return ret;
-}
-
-static int nvme_simple_suspend(struct device *dev)
-{
- struct nvme_dev *ndev = pci_get_drvdata(to_pci_dev(dev));
nvme_dev_disable(ndev, true);
return 0;
}
-static int nvme_simple_resume(struct device *dev)
+static int nvme_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct nvme_dev *ndev = pci_get_drvdata(pdev);
@@ -2926,16 +2846,9 @@ static int nvme_simple_resume(struct device *dev)
nvme_reset_ctrl(&ndev->ctrl);
return 0;
}
+#endif
-static const struct dev_pm_ops nvme_dev_pm_ops = {
- .suspend = nvme_suspend,
- .resume = nvme_resume,
- .freeze = nvme_simple_suspend,
- .thaw = nvme_simple_resume,
- .poweroff = nvme_simple_suspend,
- .restore = nvme_simple_resume,
-};
-#endif /* CONFIG_PM_SLEEP */
+static SIMPLE_DEV_PM_OPS(nvme_dev_pm_ops, nvme_suspend, nvme_resume);
static pci_ers_result_t nvme_error_detected(struct pci_dev *pdev,
pci_channel_state_t state)
@@ -3042,11 +2955,9 @@ static struct pci_driver nvme_driver = {
.probe = nvme_probe,
.remove = nvme_remove,
.shutdown = nvme_shutdown,
-#ifdef CONFIG_PM_SLEEP
.driver = {
.pm = &nvme_dev_pm_ops,
},
-#endif
.sriov_configure = pci_sriov_configure_simple,
.err_handler = &nvme_err_handler,
};
--
2.23.0.rc1
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
