On Tue, Jul 16, 2019 at 07:13:16PM -0700, Vivek Kasireddy wrote: > Although, DPLL4 enable and disable is associated with MGPLL1_ENABLE > register, we can use ICL_DPLL_CFGCR0/CR1 macros to access this dpll's > CR0 and CR1 registers by passing an id of 4 to these macros. > > Reported-by: Ville Syrjälä <[email protected]> > Cc: Ville Syrjälä <[email protected]> > Cc: José Roberto de Souza <[email protected]> > Cc: Matt Roper <[email protected]> > Cc: Imre Deak <[email protected]> > Signed-off-by: Vivek Kasireddy <[email protected]> > --- > drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 18 ++++++++++++++---- > 1 file changed, 14 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c > b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c > index 319a26a1ec10..f9bdf8514a53 100644 > --- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c > +++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c > @@ -3127,8 +3127,13 @@ static bool icl_pll_get_hw_state(struct > drm_i915_private *dev_priv, > hw_state->cfgcr0 = I915_READ(TGL_DPLL_CFGCR0(id)); > hw_state->cfgcr1 = I915_READ(TGL_DPLL_CFGCR1(id)); > } else { > - hw_state->cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(id)); > - hw_state->cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(id)); > + if (IS_ELKHARTLAKE(dev_priv) && id == DPLL_ID_EHL_DPLL4) { > + hw_state->cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(4)); > + hw_state->cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(4)); > + } else { > + hw_state->cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(id)); > + hw_state->cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(id)); > + } > } > > ret = true; > @@ -3169,8 +3174,13 @@ static void icl_dpll_write(struct drm_i915_private > *dev_priv, > cfgcr0_reg = TGL_DPLL_CFGCR0(id); > cfgcr1_reg = TGL_DPLL_CFGCR1(id); > } else { > - cfgcr0_reg = ICL_DPLL_CFGCR0(id); > - cfgcr1_reg = ICL_DPLL_CFGCR1(id); > + if (IS_ELKHARTLAKE(dev_priv) && id == DPLL_ID_EHL_DPLL4) { > + cfgcr0_reg = ICL_DPLL_CFGCR0(4); > + cfgcr1_reg = ICL_DPLL_CFGCR1(4); > + } else { > + cfgcr0_reg = ICL_DPLL_CFGCR0(id); > + cfgcr1_reg = ICL_DPLL_CFGCR1(id); > + }
I was a bit worried this would also affect other parts of the code, but at least ICL_DPCLKA_CFGCR0_DDI_CLK_SEL() seems to do the right thing with the id==2, and I couldn't immediately spot other issues. Also surprising that ci didn't get confused by the fact that this was posted as a reply to another series. Generally you should avoid replying with anything except direct replacements for the original patches in the series. Pushed to dinq. Thanks for the patch. > } > > I915_WRITE(cfgcr0_reg, hw_state->cfgcr0); > -- > 2.21.0 -- Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
