>-----Original Message----- >From: Intel-gfx [mailto:[email protected]] On Behalf Of >Manasi Navare >Sent: Tuesday, April 23, 2019 8:49 AM >To: [email protected] >Cc: Nikula, Jani <[email protected]>; Vetter, Daniel ><[email protected]> >Subject: [Intel-gfx] [PATCH v2 2/4] drm/i915/icl: Enable TRANSCODER PORT SYNC >for tiled displays across separate ports > >In case of tiled displays where different tiles are displayed across different >ports, >we need to synchronize the transcoders involved. >This patch implements the transcoder port sync feature for synchronizing one >master transcoder with one or more slave transcoders. This is only enbaled in ^^^typo
Anusha >slave transcoder and the master transcoder is unaware that it is operating in >this >mode. >This has been tested with tiled display connected to ICL. > >v2: >* Do not use RMW, just write to the register in commit (Jani N) > >Cc: Daniel Vetter <[email protected]> >Cc: Ville Syrjälä <[email protected]> >Cc: Maarten Lankhorst <[email protected]> >Cc: Matt Roper <[email protected]> >Cc: Jani Nikula <[email protected]> >Signed-off-by: Manasi Navare <[email protected]> >--- > drivers/gpu/drm/i915/intel_display.c | 58 ++++++++++++++++++++++++++++ > 1 file changed, 58 insertions(+) > >diff --git a/drivers/gpu/drm/i915/intel_display.c >b/drivers/gpu/drm/i915/intel_display.c >index 92dea2231499..81e8cb9fe221 100644 >--- a/drivers/gpu/drm/i915/intel_display.c >+++ b/drivers/gpu/drm/i915/intel_display.c >@@ -4020,6 +4020,61 @@ static void icl_set_pipe_chicken(struct intel_crtc >*crtc) > I915_WRITE(PIPE_CHICKEN(pipe), tmp); > } > >+static void icl_set_transcoder_port_sync(struct intel_atomic_state >*old_intel_state, >+ const struct intel_crtc_state >*crtc_state) { >+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); >+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); >+ struct intel_crtc_state *master_crtc_state = NULL; >+ enum transcoder master_transcoder; >+ u32 trans_ddi_func_ctl2_val; >+ u8 master_select; >+ >+ /* >+ * Port Sync Mode cannot be enabled for DP MST >+ */ >+ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)) >+ return; >+ >+ /* >+ * Configure the master select and enable Transcoder Port Sync for >+ * Slave CRTCs transcoder. >+ */ >+ if (!crtc_state->master_crtc) >+ return; >+ >+ master_crtc_state = intel_atomic_get_new_crtc_state(old_intel_state, >+ crtc_state- >>master_crtc); >+ if (WARN_ON(!master_crtc_state)) >+ return; >+ >+ master_transcoder = master_crtc_state->cpu_transcoder; >+ switch (master_transcoder) { >+ case TRANSCODER_A: >+ master_select = 1; >+ break; >+ case TRANSCODER_B: >+ master_select = 2; >+ break; >+ case TRANSCODER_C: >+ master_select = 3; >+ break; >+ case TRANSCODER_EDP: >+ default: >+ master_select = 0; >+ break; >+ } >+ /* Set the master select bits for Tranascoder Port Sync */ >+ trans_ddi_func_ctl2_val = >(PORT_SYNC_MODE_MASTER_SELECT(master_select) & >+ PORT_SYNC_MODE_MASTER_SELECT_MASK) ><< >+ PORT_SYNC_MODE_MASTER_SELECT_SHIFT; >+ /* Enable Transcoder Port Sync */ >+ trans_ddi_func_ctl2_val |= PORT_SYNC_MODE_ENABLE; >+ >+ I915_WRITE(TRANS_DDI_FUNC_CTL2(crtc_state->cpu_transcoder), >+ trans_ddi_func_ctl2_val); >+} >+ > static void intel_update_pipe_config(const struct intel_crtc_state >*old_crtc_state, > const struct intel_crtc_state >*new_crtc_state) { @@ -5971,6 +6026,9 @@ static void >haswell_crtc_enable(struct intel_crtc_state *pipe_config, > if (!transcoder_is_dsi(cpu_transcoder)) > intel_set_pipe_timings(pipe_config); > >+ if (INTEL_GEN(dev_priv) >= 11) >+ icl_set_transcoder_port_sync(old_intel_state, pipe_config); >+ > intel_set_pipe_src_size(pipe_config); > > if (cpu_transcoder != TRANSCODER_EDP && >-- >2.19.1 > >_______________________________________________ >Intel-gfx mailing list >[email protected] >https://lists.freedesktop.org/mailman/listinfo/intel-gfx _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
