On Thu, Oct 25, 2018 at 11:47:52PM +0530, Ramalingam C wrote:
> Conceptually user should be knowing the feature status through uAPI.
> So HDCP authentication failure information need not DRM_ERRORS.
> They are needed only for ENG debugging.
>
> And also in HDCP we tolerate the retries for HDCP authentication.
> Hence if we print the failure info initial attempts as ERRORs CI will
> fail the IGT.
>
> So we present the information of the failures in form of DRM_DEBUG
> msgs for debugging purpose.
>
> Signed-off-by: Ramalingam C <[email protected]>
> ---
> drivers/gpu/drm/i915/intel_hdcp.c | 46
> +++++++++++++++++++--------------------
> 1 file changed, 23 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_hdcp.c
> b/drivers/gpu/drm/i915/intel_hdcp.c
> index 5b423a78518d..d92b04c3ed4e 100644
> --- a/drivers/gpu/drm/i915/intel_hdcp.c
> +++ b/drivers/gpu/drm/i915/intel_hdcp.c
> @@ -166,8 +166,8 @@ static int intel_hdcp_load_keys(struct drm_i915_private
> *dev_priv)
> SKL_PCODE_LOAD_HDCP_KEYS, 1);
> mutex_unlock(&dev_priv->pcu_lock);
> if (ret) {
> - DRM_ERROR("Failed to initiate HDCP key load (%d)\n",
> - ret);
> + DRM_DEBUG_KMS("Failed to initiate HDCP key load (%d)\n",
> + ret);
This one indicates an i915 hw failure, not anything wrong with the sink.
So should stay at DRM_ERROR.
Btw I noticed that 2 DRM_DEBUG_KMS in intel_hdcp_validate_v_prime also
indicate programming/i915-side hw errors. So should be upgraded to
DRM_ERROR I think (but in a separate patch).
> return ret;
> }
> } else {
> @@ -195,7 +195,7 @@ static int intel_write_sha_text(struct drm_i915_private
> *dev_priv, u32 sha_text)
> I915_WRITE(HDCP_SHA_TEXT, sha_text);
> if (intel_wait_for_register(dev_priv, HDCP_REP_CTL,
> HDCP_SHA1_READY, HDCP_SHA1_READY, 1)) {
> - DRM_ERROR("Timed out waiting for SHA1 ready\n");
> + DRM_DEBUG_KMS("Timed out waiting for SHA1 ready\n");
Same here.
> return -ETIMEDOUT;
> }
> return 0;
> @@ -219,7 +219,7 @@ u32 intel_hdcp_get_repeater_ctl(struct intel_digital_port
> *intel_dig_port)
> default:
> break;
> }
> - DRM_ERROR("Unknown port %d\n", port);
> + DRM_DEBUG_KMS("Unknown port %d\n", port);
Also a programming error.
> return -EINVAL;
> }
>
> @@ -448,7 +448,7 @@ int intel_hdcp_auth_downstream(struct intel_digital_port
> *intel_dig_port,
>
> ret = intel_hdcp_poll_ksv_fifo(intel_dig_port, shim);
> if (ret) {
> - DRM_ERROR("KSV list failed to become ready (%d)\n", ret);
> + DRM_DEBUG_KMS("KSV list failed to become ready (%d)\n", ret);
This one is a sink issue, so correct to change to DRM_DEBUG_KMS. If I
don't comment, assume that I agree with your change.
> return ret;
> }
>
> @@ -458,7 +458,7 @@ int intel_hdcp_auth_downstream(struct intel_digital_port
> *intel_dig_port,
>
> if (DRM_HDCP_MAX_DEVICE_EXCEEDED(bstatus[0]) ||
> DRM_HDCP_MAX_CASCADE_EXCEEDED(bstatus[1])) {
> - DRM_ERROR("Max Topology Limit Exceeded\n");
> + DRM_DEBUG_KMS("Max Topology Limit Exceeded\n");
> return -EPERM;
> }
>
> @@ -494,7 +494,7 @@ int intel_hdcp_auth_downstream(struct intel_digital_port
> *intel_dig_port,
> }
>
> if (i == tries) {
> - DRM_ERROR("V Prime validation failed.(%d)\n", ret);
> + DRM_DEBUG_KMS("V Prime validation failed.(%d)\n", ret);
> goto err;
> }
>
> @@ -543,7 +543,7 @@ static int intel_hdcp_auth(struct intel_digital_port
> *intel_dig_port,
> if (ret)
> return ret;
> if (!hdcp_capable) {
> - DRM_ERROR("Panel is not HDCP capable\n");
> + DRM_DEBUG_KMS("Panel is not HDCP capable\n");
> return -EINVAL;
> }
> }
> @@ -557,7 +557,7 @@ static int intel_hdcp_auth(struct intel_digital_port
> *intel_dig_port,
> if (intel_wait_for_register(dev_priv, PORT_HDCP_STATUS(port),
> HDCP_STATUS_AN_READY,
> HDCP_STATUS_AN_READY, 1)) {
> - DRM_ERROR("Timed out waiting for An\n");
> + DRM_DEBUG_KMS("Timed out waiting for An\n");
Again this would indicate an i915 hw issue, so better to keep it at
DRM_ERROR.
> return -ETIMEDOUT;
> }
>
> @@ -594,7 +594,7 @@ static int intel_hdcp_auth(struct intel_digital_port
> *intel_dig_port,
> /* Wait for R0 ready */
> if (wait_for(I915_READ(PORT_HDCP_STATUS(port)) &
> (HDCP_STATUS_R0_READY | HDCP_STATUS_ENC), 1)) {
> - DRM_ERROR("Timed out waiting for R0 ready\n");
> + DRM_DEBUG_KMS("Timed out waiting for R0 ready\n");
Same, all the wait_for and wait_for_register indicate i915-side hw issues,
and should stay at DRM_ERROR. Otherwise we just reduce test coverage.
Please leave all of them as DRM_ERROR.
> return -ETIMEDOUT;
> }
>
> @@ -629,15 +629,15 @@ static int intel_hdcp_auth(struct intel_digital_port
> *intel_dig_port,
> }
>
> if (i == tries) {
> - DRM_ERROR("Timed out waiting for Ri prime match (%x)\n",
> - I915_READ(PORT_HDCP_STATUS(port)));
> + DRM_DEBUG_KMS("Timed out waiting for Ri prime match (%x)\n",
> + I915_READ(PORT_HDCP_STATUS(port)));
> return -ETIMEDOUT;
> }
>
> /* Wait for encryption confirmation */
> if (intel_wait_for_register(dev_priv, PORT_HDCP_STATUS(port),
> HDCP_STATUS_ENC, HDCP_STATUS_ENC, 20)) {
> - DRM_ERROR("Timed out waiting for encryption\n");
> + DRM_DEBUG_KMS("Timed out waiting for encryption\n");
> return -ETIMEDOUT;
> }
>
> @@ -666,13 +666,13 @@ static int _intel_hdcp_disable(struct intel_connector
> *connector)
> I915_WRITE(PORT_HDCP_CONF(port), 0);
> if (intel_wait_for_register(dev_priv, PORT_HDCP_STATUS(port), ~0, 0,
> 20)) {
> - DRM_ERROR("Failed to disable HDCP, timeout clearing status\n");
> + DRM_DEBUG_KMS("Failed to disable HDCP, timeout.\n");
> return -ETIMEDOUT;
> }
>
> ret = connector->hdcp_shim->toggle_signalling(intel_dig_port, false);
> if (ret) {
> - DRM_ERROR("Failed to disable HDCP signalling\n");
> + DRM_DEBUG_KMS("Failed to disable HDCP signalling\n");
> return ret;
> }
>
> @@ -689,7 +689,7 @@ static int _intel_hdcp_enable(struct intel_connector
> *connector)
> connector->base.name, connector->base.base.id);
>
> if (!hdcp_key_loadable(dev_priv)) {
> - DRM_ERROR("HDCP key Load is not possible\n");
> + DRM_DEBUG_KMS("HDCP key Load is not possible\n");
> return -ENXIO;
> }
>
> @@ -700,7 +700,7 @@ static int _intel_hdcp_enable(struct intel_connector
> *connector)
> intel_hdcp_clear_keys(dev_priv);
> }
> if (ret) {
> - DRM_ERROR("Could not load HDCP keys, (%d)\n", ret);
> + DRM_DEBUG_KMS("Could not load HDCP keys, (%d)\n", ret);
> return ret;
> }
>
> @@ -717,7 +717,7 @@ static int _intel_hdcp_enable(struct intel_connector
> *connector)
> _intel_hdcp_disable(connector);
> }
>
> - DRM_ERROR("HDCP authentication failed (%d tries/%d)\n", tries, ret);
> + DRM_DEBUG_KMS("HDCP authentication failed (%d tries/%d)\n", tries, ret);
> return ret;
> }
>
> @@ -871,9 +871,9 @@ int intel_hdcp_check_link(struct intel_connector
> *connector)
> goto out;
>
> if (!(I915_READ(PORT_HDCP_STATUS(port)) & HDCP_STATUS_ENC)) {
> - DRM_ERROR("%s:%d HDCP check failed: link is not encrypted,%x\n",
> - connector->base.name, connector->base.base.id,
> - I915_READ(PORT_HDCP_STATUS(port)));
> + DRM_DEBUG_KMS("%s:%d HDCP Link is not encrypted,%x\n",
> + connector->base.name, connector->base.base.id,
> + I915_READ(PORT_HDCP_STATUS(port)));
Again I think this would indicate an i915 hw issue, let's leave at
DRM_ERROR.
> ret = -ENXIO;
> connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_DESIRED;
> schedule_work(&connector->hdcp_prop_work);
> @@ -895,7 +895,7 @@ int intel_hdcp_check_link(struct intel_connector
> *connector)
>
> ret = _intel_hdcp_disable(connector);
> if (ret) {
> - DRM_ERROR("Failed to disable hdcp (%d)\n", ret);
> + DRM_DEBUG_KMS("Failed to disable hdcp (%d)\n", ret);
Disabling hdcp should always succeeds, again let's leave at DRM_ERROR.
> connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_DESIRED;
> schedule_work(&connector->hdcp_prop_work);
> goto out;
> @@ -903,7 +903,7 @@ int intel_hdcp_check_link(struct intel_connector
> *connector)
>
> ret = _intel_hdcp_enable(connector);
> if (ret) {
> - DRM_ERROR("Failed to enable hdcp (%d)\n", ret);
> + DRM_DEBUG_KMS("Failed to enable hdcp (%d)\n", ret);
Yeah, this can fail when the sink is gone.
When you respin this, can you pls include the added patch to make the 2
debug outputs into DRM_ERROR, and the 4 patches you've identified we can
merge already? I want to make sure CI is still approving of all of them,
now that the kms_content_protection testcase has landed.
Thanks, Daniel
> connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_DESIRED;
> schedule_work(&connector->hdcp_prop_work);
> goto out;
> --
> 2.7.4
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
