From: Kai Chen <[email protected]> On GEN9LP, raise the RPS FUp Interrupt Limiter above softmax so that the HW won't miss interrupt when requested max_freq is set back to RP0 value.
Signed-off-by: Kai Chen <[email protected]> --- drivers/gpu/drm/i915/intel_pm.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index d99e5fabe93c..bf2494294c9d 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -6276,7 +6276,20 @@ static u32 intel_rps_limits(struct drm_i915_private *dev_priv, u8 val) * frequency, if the down threshold expires in that window we will not * receive a down interrupt. */ if (INTEL_GEN(dev_priv) >= 9) { - limits = (rps->max_freq_softlimit) << 23; + int max_freq = rps->max_freq_softlimit; + int rp0_freq = rps->rp0_freq; + + if (IS_GEN9_LP(dev_priv) && (max_freq == rp0_freq)) + /* + * For GEN9_LP, it is suggested to increase the upper + * interrupt limiter by 1 (16.6MHz) so that the HW will + * generate an interrupt when we are near or just below + * the upper limit. + */ + limits = (rps->max_freq_softlimit + 1) << 23; + else + limits = (rps->max_freq_softlimit) << 23; + if (val <= rps->min_freq_softlimit) limits |= (rps->min_freq_softlimit) << 14; } else { -- 2.17.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
