On Fri, 11 May 2018, "Kumar, Abhay" <[email protected]> wrote:
> On 5/11/2018 5:33 AM, Ville Syrjälä wrote:
>> On Wed, May 09, 2018 at 06:25:32PM -0700, Abhay Kumar wrote:
>>> From: Ville Syrjälä <[email protected]>
>>>
>>> CDCLK has to be at least twice the BLCK regardless of audio. Audio
>>> driver has to probe using this hook and increase the clock even in
>>> absence of any display.
>>>
>>> v2: Use atomic refcount for get_power, put_power so that we can
>>> call each once(Abhay).
>>>
>>> Signed-off-by: Ville Syrjälä <[email protected]>
>>> Signed-off-by: Abhay Kumar <[email protected]>
>>> ---
>>> drivers/gpu/drm/i915/i915_drv.h | 3 ++
>>> drivers/gpu/drm/i915/intel_audio.c | 66
>>> +++++++++++++++++++++++++++++++++---
>>> drivers/gpu/drm/i915/intel_cdclk.c | 29 +++++-----------
>>> drivers/gpu/drm/i915/intel_display.c | 7 +++-
>>> drivers/gpu/drm/i915/intel_drv.h | 2 ++
>>> 5 files changed, 82 insertions(+), 25 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/i915/i915_drv.h
>>> b/drivers/gpu/drm/i915/i915_drv.h
>>> index 24c5e4765afd..9c4ea767688a 100644
>>> --- a/drivers/gpu/drm/i915/i915_drv.h
>>> +++ b/drivers/gpu/drm/i915/i915_drv.h
>>> @@ -1692,6 +1692,7 @@ struct drm_i915_private {
>>> unsigned int hpll_freq;
>>> unsigned int fdi_pll_freq;
>>> unsigned int czclk_freq;
>>> + atomic_t get_put_refcount;
>>>
>>> struct {
>>> /*
>>> @@ -1709,6 +1710,8 @@ struct drm_i915_private {
>>> struct intel_cdclk_state actual;
>>> /* The current hardware cdclk state */
>>> struct intel_cdclk_state hw;
>>> +
>>> + int force_min_cdclk;
>>> } cdclk;
>>>
>>> /**
>>> diff --git a/drivers/gpu/drm/i915/intel_audio.c
>>> b/drivers/gpu/drm/i915/intel_audio.c
>>> index 3ea566f99450..a1e2c4daae6e 100644
>>> --- a/drivers/gpu/drm/i915/intel_audio.c
>>> +++ b/drivers/gpu/drm/i915/intel_audio.c
>>> @@ -618,7 +618,6 @@ void intel_audio_codec_enable(struct intel_encoder
>>> *encoder,
>>>
>>> if (!connector->eld[0])
>>> return;
>>> -
>>> DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
>>> connector->base.id,
>>> connector->name,
>>> @@ -713,14 +712,73 @@ void intel_init_audio_hooks(struct drm_i915_private
>>> *dev_priv)
>>> }
>>> }
>>>
>>> +static void glk_force_audio_cdclk(struct drm_i915_private *dev_priv,
>>> + bool enable)
>>> +{
>>> + struct drm_modeset_acquire_ctx ctx;
>>> + struct drm_atomic_state *state;
>>> + int ret;
>>> +
>>> + drm_modeset_acquire_init(&ctx, 0);
>>> + state = drm_atomic_state_alloc(&dev_priv->drm);
>>> + if (WARN_ON(!state))
>>> + return;
>>> +
>>> + state->acquire_ctx = &ctx;
>>> +
>>> +retry:
>>> + to_intel_atomic_state(state)->modeset = true;
>>> + to_intel_atomic_state(state)->cdclk.force_min_cdclk =
>>> + enable ? 2 * 96000 : 0;
>>> +
>>> + /*
>>> + * Protects dev_priv->cdclk.force_min_cdclk
>>> + * Need to lock this here in case we have no active pipes
>>> + * and thus wouldn't lock it during the commit otherwise.
>>> + */
>>> + ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,
>>> &ctx);
>>> + if (!ret)
>>> + ret = drm_atomic_commit(state);
>>> +
>>> + if (ret == -EDEADLK) {
>>> + drm_atomic_state_clear(state);
>>> + drm_modeset_backoff(&ctx);
>>> + goto retry;
>>> + }
>>> +
>>> + WARN_ON(ret);
>>> +
>>> + drm_atomic_state_put(state);
>>> +
>>> + drm_modeset_drop_locks(&ctx);
>>> + drm_modeset_acquire_fini(&ctx);
>>> +}
>>> +
>>> static void i915_audio_component_get_power(struct device *kdev)
>>> {
>>> - intel_display_power_get(kdev_to_i915(kdev), POWER_DOMAIN_AUDIO);
>>> + struct drm_i915_private *dev_priv = kdev_to_i915(kdev);
>>> +
>>> + intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO);
>>> + atomic_inc(&dev_priv->get_put_refcount);
>>> +
>>> + /* Force cdclk to 2*BCLK during first time get power call */
>>> + if (atomic_read(&dev_priv->get_put_refcount) == 1)
>> If it needs to be atomic (ie. we have concurrent callers of get/put_power())
>> then you would also need to do the inc+check atomically. But that in itself
>> wouldn't help because only the first caller would do the cdclk change,
>> and the second call would just immediately proceed without waiting for the
>> cdclk to actually have been changed.
>>
>> So the first question we should ask is whether we can even have
>> concurrent callers, or if there's some form of mutual exclusion
>> already on the caller side?
> As per my understanding I don't think we have any concurrent callers as
> these calls will be in sequence.
> Do you prefer to use static instead?
Static what?
BR,
Jani.
>>
>>> + if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
>>> + glk_force_audio_cdclk(dev_priv, true);
>>> }
>>>
>>> static void i915_audio_component_put_power(struct device *kdev)
>>> {
>>> - intel_display_power_put(kdev_to_i915(kdev), POWER_DOMAIN_AUDIO);
>>> + struct drm_i915_private *dev_priv = kdev_to_i915(kdev);
>>> +
>>> + atomic_dec(&dev_priv->get_put_refcount);
>>> +
>>> + /* Force required cdclk during last time put power call */
>>> + if (atomic_read(&dev_priv->get_put_refcount) == 0)
>>> + if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
>>> + glk_force_audio_cdclk(dev_priv, false);
>>> +
>>> + intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO);
>>> }
>>>
>>> static void i915_audio_component_codec_wake_override(struct device *kdev,
>>> @@ -959,7 +1017,7 @@ void i915_audio_component_init(struct drm_i915_private
>>> *dev_priv)
>>> /* continue with reduced functionality */
>>> return;
>>> }
>>> -
>>> + atomic_set(&dev_priv->get_put_refcount, 0);
>>> dev_priv->audio_component_registered = true;
>>> }
>>>
>>> diff --git a/drivers/gpu/drm/i915/intel_cdclk.c
>>> b/drivers/gpu/drm/i915/intel_cdclk.c
>>> index 704ddb4d3ca7..a0c281a90ff4 100644
>>> --- a/drivers/gpu/drm/i915/intel_cdclk.c
>>> +++ b/drivers/gpu/drm/i915/intel_cdclk.c
>>> @@ -2143,19 +2143,8 @@ int intel_crtc_compute_min_cdclk(const struct
>>> intel_crtc_state *crtc_state)
>>> /*
>>> * According to BSpec, "The CD clock frequency must be at least twice
>>> * the frequency of the Azalia BCLK." and BCLK is 96 MHz by default.
>>> - *
>>> - * FIXME: Check the actual, not default, BCLK being used.
>>> - *
>>> - * FIXME: This does not depend on ->has_audio because the higher CDCLK
>>> - * is required for audio probe, also when there are no audio capable
>>> - * displays connected at probe time. This leads to unnecessarily high
>>> - * CDCLK when audio is not required.
>>> - *
>>> - * FIXME: This limit is only applied when there are displays connected
>>> - * at probe time. If we probe without displays, we'll still end up using
>>> - * the platform minimum CDCLK, failing audio probe.
>>> */
>>> - if (INTEL_GEN(dev_priv) >= 9)
>>> + if (crtc_state->has_audio && INTEL_GEN(dev_priv) >= 9)
>>> min_cdclk = max(2 * 96000, min_cdclk);
>>>
>>> /*
>>> @@ -2195,7 +2184,7 @@ static int intel_compute_min_cdclk(struct
>>> drm_atomic_state *state)
>>> intel_state->min_cdclk[i] = min_cdclk;
>>> }
>>>
>>> - min_cdclk = 0;
>>> + min_cdclk = intel_state->cdclk.force_min_cdclk;
>>> for_each_pipe(dev_priv, pipe)
>>> min_cdclk = max(intel_state->min_cdclk[pipe], min_cdclk);
>>>
>>> @@ -2256,7 +2245,7 @@ static int vlv_modeset_calc_cdclk(struct
>>> drm_atomic_state *state)
>>> vlv_calc_voltage_level(dev_priv, cdclk);
>>>
>>> if (!intel_state->active_crtcs) {
>>> - cdclk = vlv_calc_cdclk(dev_priv, 0);
>>> + cdclk = vlv_calc_cdclk(dev_priv,
>>> intel_state->cdclk.force_min_cdclk);
>>>
>>> intel_state->cdclk.actual.cdclk = cdclk;
>>> intel_state->cdclk.actual.voltage_level =
>>> @@ -2289,7 +2278,7 @@ static int bdw_modeset_calc_cdclk(struct
>>> drm_atomic_state *state)
>>> bdw_calc_voltage_level(cdclk);
>>>
>>> if (!intel_state->active_crtcs) {
>>> - cdclk = bdw_calc_cdclk(0);
>>> + cdclk = bdw_calc_cdclk(intel_state->cdclk.force_min_cdclk);
>>>
>>> intel_state->cdclk.actual.cdclk = cdclk;
>>> intel_state->cdclk.actual.voltage_level =
>>> @@ -2361,7 +2350,7 @@ static int skl_modeset_calc_cdclk(struct
>>> drm_atomic_state *state)
>>> skl_calc_voltage_level(cdclk);
>>>
>>> if (!intel_state->active_crtcs) {
>>> - cdclk = skl_calc_cdclk(0, vco);
>>> + cdclk = skl_calc_cdclk(intel_state->cdclk.force_min_cdclk, vco);
>>>
>>> intel_state->cdclk.actual.vco = vco;
>>> intel_state->cdclk.actual.cdclk = cdclk;
>>> @@ -2400,10 +2389,10 @@ static int bxt_modeset_calc_cdclk(struct
>>> drm_atomic_state *state)
>>>
>>> if (!intel_state->active_crtcs) {
>>> if (IS_GEMINILAKE(dev_priv)) {
>>> - cdclk = glk_calc_cdclk(0);
>>> + cdclk =
>>> glk_calc_cdclk(intel_state->cdclk.force_min_cdclk);
>>> vco = glk_de_pll_vco(dev_priv, cdclk);
>>> } else {
>>> - cdclk = bxt_calc_cdclk(0);
>>> + cdclk =
>>> bxt_calc_cdclk(intel_state->cdclk.force_min_cdclk);
>>> vco = bxt_de_pll_vco(dev_priv, cdclk);
>>> }
>>>
>>> @@ -2439,7 +2428,7 @@ static int cnl_modeset_calc_cdclk(struct
>>> drm_atomic_state *state)
>>> cnl_compute_min_voltage_level(intel_state));
>>>
>>> if (!intel_state->active_crtcs) {
>>> - cdclk = cnl_calc_cdclk(0);
>>> + cdclk = cnl_calc_cdclk(intel_state->cdclk.force_min_cdclk);
>>> vco = cnl_cdclk_pll_vco(dev_priv, cdclk);
>>>
>>> intel_state->cdclk.actual.vco = vco;
>>> @@ -2472,7 +2461,7 @@ static int icl_modeset_calc_cdclk(struct
>>> drm_atomic_state *state)
>>> intel_state->cdclk.logical.cdclk = cdclk;
>>>
>>> if (!intel_state->active_crtcs) {
>>> - cdclk = icl_calc_cdclk(0, ref);
>>> + cdclk = icl_calc_cdclk(intel_state->cdclk.force_min_cdclk, ref);
>>> vco = icl_calc_cdclk_pll_vco(dev_priv, cdclk);
>>>
>>> intel_state->cdclk.actual.vco = vco;
>>> diff --git a/drivers/gpu/drm/i915/intel_display.c
>>> b/drivers/gpu/drm/i915/intel_display.c
>>> index cdfe0951d171..0b0e519fe844 100644
>>> --- a/drivers/gpu/drm/i915/intel_display.c
>>> +++ b/drivers/gpu/drm/i915/intel_display.c
>>> @@ -12041,6 +12041,10 @@ static int intel_modeset_checks(struct
>>> drm_atomic_state *state)
>>> return -EINVAL;
>>> }
>>>
>>> + /* keep the current setting */
>>> + if (!intel_state->modeset)
>>> + intel_state->cdclk.force_min_cdclk =
>>> dev_priv->cdclk.force_min_cdclk;
>>> +
>>> intel_state->modeset = true;
>>> intel_state->active_crtcs = dev_priv->active_crtcs;
>>> intel_state->cdclk.logical = dev_priv->cdclk.logical;
>>> @@ -12136,7 +12140,7 @@ static int intel_atomic_check(struct drm_device
>>> *dev,
>>> struct drm_crtc *crtc;
>>> struct drm_crtc_state *old_crtc_state, *crtc_state;
>>> int ret, i;
>>> - bool any_ms = false;
>>> + bool any_ms = intel_state->modeset;
>>>
>>> /* Catch I915_MODE_FLAG_INHERITED */
>>> for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state,
>>> @@ -12684,6 +12688,7 @@ static int intel_atomic_commit(struct drm_device
>>> *dev,
>>> dev_priv->active_crtcs = intel_state->active_crtcs;
>>> dev_priv->cdclk.logical = intel_state->cdclk.logical;
>>> dev_priv->cdclk.actual = intel_state->cdclk.actual;
>>> + dev_priv->cdclk.force_min_cdclk =
>>> intel_state->cdclk.force_min_cdclk;
>>> }
>>>
>>> drm_atomic_state_get(state);
>>> diff --git a/drivers/gpu/drm/i915/intel_drv.h
>>> b/drivers/gpu/drm/i915/intel_drv.h
>>> index 52337f487ebc..7b53f72d7242 100644
>>> --- a/drivers/gpu/drm/i915/intel_drv.h
>>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>>> @@ -461,6 +461,8 @@ struct intel_atomic_state {
>>> * state only when all crtc's are DPMS off.
>>> */
>>> struct intel_cdclk_state actual;
>>> +
>>> + int force_min_cdclk;
>>> } cdclk;
>>>
>>> bool dpll_set, modeset;
>>> --
>>> 2.7.4
>>>
>>> _______________________________________________
>>> Intel-gfx mailing list
>>> [email protected]
>>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
