HDMI Mode selection on CNL is on CFGCR0 for that PLL, not
on in a global CTRL1 as it was on SKL.
The original patch addressed this difference, but leaving behind
this single entry here. So we were checking the wrong bits during
the PLL initialization and consequently avoiding the CFGCR1 setup
during HDMI initialization. Luckly when only HDMI was in use BIOS
had already setup this for us. But the dual display with hot plug
were messed up.
Fixes: a927c927de34 ("drm/i915/cnl: Initialize PLLs")
Cc: Paulo Zanoni <[email protected]>
Cc: Manasi Navare <[email protected]>
Cc: Kahola, Mika <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
---
drivers/gpu/drm/i915/intel_dpll_mgr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c
b/drivers/gpu/drm/i915/intel_dpll_mgr.c
index 55997389a29f..032fd915e929 100644
--- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
@@ -2000,7 +2000,7 @@ static void cnl_ddi_pll_enable(struct drm_i915_private
*dev_priv,
/* 3. Configure DPLL_CFGCR0 */
/* Avoid touch CFGCR1 if HDMI mode is not enabled */
- if (pll->state.hw_state.cfgcr0 & DPLL_CTRL1_HDMI_MODE(pll->id)) {
+ if (pll->state.hw_state.cfgcr0 & DPLL_CFGCR0_HDMI_MODE) {
val = pll->state.hw_state.cfgcr1;
I915_WRITE(CNL_DPLL_CFGCR1(pll->id), val);
/* 4. Reab back to ensure writes completed */
--
2.13.5
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
