From: Ville Syrjälä <[email protected]> Move cursor_base, cursor_cntl, and cursor_size from intel_crtc into intel_plane so that we don't need the crtc for cursor stuff so much.
Also entirely nuke cursor_addr which IMO doesn't provide any benefit since it's not actually used by the cursor code itself. I'm not 100% sure what the SKL+ DDB is code is after by looking at cursor_addr so I just make it do its checks unconditionally. If that's not correct then we should likely replace it with somehting like plane_state->visible. Signed-off-by: Ville Syrjälä <[email protected]> --- drivers/gpu/drm/i915/i915_debugfs.c | 48 +++++----------------- drivers/gpu/drm/i915/intel_display.c | 80 +++++++++++++++--------------------- drivers/gpu/drm/i915/intel_drv.h | 9 ++-- 3 files changed, 47 insertions(+), 90 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index aa2d726b4349..fc20580ecfc3 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -3031,36 +3031,6 @@ static void intel_connector_info(struct seq_file *m, intel_seq_print_mode(m, 2, mode); } -static bool cursor_active(struct drm_i915_private *dev_priv, int pipe) -{ - u32 state; - - if (IS_I845G(dev_priv) || IS_I865G(dev_priv)) - state = I915_READ(CURCNTR(PIPE_A)) & CURSOR_ENABLE; - else - state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE; - - return state; -} - -static bool cursor_position(struct drm_i915_private *dev_priv, - int pipe, int *x, int *y) -{ - u32 pos; - - pos = I915_READ(CURPOS(pipe)); - - *x = (pos >> CURSOR_X_SHIFT) & CURSOR_POS_MASK; - if (pos & (CURSOR_POS_SIGN << CURSOR_X_SHIFT)) - *x = -*x; - - *y = (pos >> CURSOR_Y_SHIFT) & CURSOR_POS_MASK; - if (pos & (CURSOR_POS_SIGN << CURSOR_Y_SHIFT)) - *y = -*y; - - return cursor_active(dev_priv, pipe); -} - static const char *plane_type(enum drm_plane_type type) { switch (type) { @@ -3182,9 +3152,7 @@ static int i915_display_info(struct seq_file *m, void *unused) seq_printf(m, "CRTC info\n"); seq_printf(m, "---------\n"); for_each_intel_crtc(dev, crtc) { - bool active; struct intel_crtc_state *pipe_config; - int x, y; pipe_config = to_intel_crtc_state(crtc->base.state); @@ -3195,14 +3163,18 @@ static int i915_display_info(struct seq_file *m, void *unused) yesno(pipe_config->dither), pipe_config->pipe_bpp); if (pipe_config->base.active) { + struct intel_plane *cursor = + to_intel_plane(crtc->base.cursor); + intel_crtc_info(m, crtc); - active = cursor_position(dev_priv, crtc->pipe, &x, &y); - seq_printf(m, "\tcursor visible? %s, position (%d, %d), size %dx%d, addr 0x%08x, active? %s\n", - yesno(crtc->cursor_base), - x, y, crtc->base.cursor->state->crtc_w, - crtc->base.cursor->state->crtc_h, - crtc->cursor_addr, yesno(active)); + seq_printf(m, "\tcursor visible? %s, position (%d, %d), size %dx%d, addr 0x%08x\n", + yesno(cursor->base.state->visible), + cursor->base.state->crtc_x, + cursor->base.state->crtc_y, + cursor->base.state->crtc_w, + cursor->base.state->crtc_h, + cursor->cursor.base); intel_scaler_info(m, crtc); intel_plane_info(m, crtc); } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index b884c0d5bbb3..191685a37200 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9153,8 +9153,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc, return active; } -static u32 intel_cursor_base(struct intel_crtc *crtc, - struct intel_plane *plane, +static u32 intel_cursor_base(struct intel_plane *plane, const struct intel_plane_state *plane_state) { struct drm_i915_private *dev_priv = to_i915(plane->base.dev); @@ -9167,8 +9166,6 @@ static u32 intel_cursor_base(struct intel_crtc *crtc, else base = intel_plane_ggtt_offset(plane_state); - crtc->cursor_addr = base; - /* ILK+ do this automagically */ if (HAS_GMCH_DISPLAY(dev_priv) && plane_state->base.rotation & DRM_ROTATE_180) @@ -9178,12 +9175,10 @@ static u32 intel_cursor_base(struct intel_crtc *crtc, return base; } -static void i845_update_cursor(struct drm_crtc *crtc, u32 base, +static void i845_update_cursor(struct intel_plane *plane, u32 base, const struct intel_plane_state *plane_state) { - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = to_i915(dev); - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_i915_private *dev_priv = to_i915(plane->base.dev); uint32_t cntl = 0, size = 0; if (plane_state && plane_state->base.visible) { @@ -9212,42 +9207,40 @@ static void i845_update_cursor(struct drm_crtc *crtc, u32 base, size = (height << 12) | width; } - if (intel_crtc->cursor_cntl != 0 && - (intel_crtc->cursor_base != base || - intel_crtc->cursor_size != size || - intel_crtc->cursor_cntl != cntl)) { + if (plane->cursor.cntl != 0 && + (plane->cursor.base != base || + plane->cursor.size != size || + plane->cursor.cntl != cntl)) { /* On these chipsets we can only modify the base/size/stride * whilst the cursor is disabled. */ I915_WRITE(CURCNTR(PIPE_A), 0); POSTING_READ(CURCNTR(PIPE_A)); - intel_crtc->cursor_cntl = 0; + plane->cursor.cntl = 0; } - if (intel_crtc->cursor_base != base) { + if (plane->cursor.base != base) { I915_WRITE(CURBASE(PIPE_A), base); - intel_crtc->cursor_base = base; + plane->cursor.base = base; } - if (intel_crtc->cursor_size != size) { + if (plane->cursor.size != size) { I915_WRITE(CURSIZE, size); - intel_crtc->cursor_size = size; + plane->cursor.size = size; } - if (intel_crtc->cursor_cntl != cntl) { + if (plane->cursor.cntl != cntl) { I915_WRITE(CURCNTR(PIPE_A), cntl); POSTING_READ(CURCNTR(PIPE_A)); - intel_crtc->cursor_cntl = cntl; + plane->cursor.cntl = cntl; } } -static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base, +static void i9xx_update_cursor(struct intel_plane *plane, u32 base, const struct intel_plane_state *plane_state) { - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = to_i915(dev); - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int pipe = intel_crtc->pipe; + struct drm_i915_private *dev_priv = to_i915(plane->base.dev); + enum pipe pipe = plane->pipe; uint32_t cntl = 0; if (plane_state && plane_state->base.visible) { @@ -9276,28 +9269,25 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base, cntl |= CURSOR_ROTATE_180; } - if (intel_crtc->cursor_cntl != cntl) { + if (plane->cursor.cntl != cntl) { I915_WRITE(CURCNTR(pipe), cntl); POSTING_READ(CURCNTR(pipe)); - intel_crtc->cursor_cntl = cntl; + plane->cursor.cntl = cntl; } /* and commit changes on next vblank */ I915_WRITE(CURBASE(pipe), base); POSTING_READ(CURBASE(pipe)); - intel_crtc->cursor_base = base; + plane->cursor.base = base; } /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */ -static void intel_crtc_update_cursor(struct drm_crtc *crtc, - struct intel_plane *plane, +static void intel_crtc_update_cursor(struct intel_plane *plane, const struct intel_plane_state *plane_state) { - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = to_i915(dev); - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int pipe = intel_crtc->pipe; + struct drm_i915_private *dev_priv = to_i915(plane->base.dev); + enum pipe pipe = plane->pipe; u32 pos = 0, base = 0; if (plane_state) { @@ -9316,17 +9306,15 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc, } pos |= y << CURSOR_Y_SHIFT; - base = intel_cursor_base(intel_crtc, plane, plane_state); - } else { - intel_crtc->cursor_addr = 0; + base = intel_cursor_base(plane, plane_state); } I915_WRITE(CURPOS(pipe), pos); if (IS_I845G(dev_priv) || IS_I865G(dev_priv)) - i845_update_cursor(crtc, base, plane_state); + i845_update_cursor(plane, base, plane_state); else - i9xx_update_cursor(crtc, base, plane_state); + i9xx_update_cursor(plane, base, plane_state); } static bool cursor_size_ok(struct drm_i915_private *dev_priv, @@ -11882,7 +11870,7 @@ static void verify_wm_state(struct drm_crtc *crtc, * allocation. In that case since the ddb allocation will be updated * once the plane becomes visible, we can skip this check */ - if (intel_crtc->cursor_addr) { + if (1) { hw_plane_wm = &hw_wm.planes[PLANE_CURSOR]; sw_plane_wm = &sw_wm->planes[PLANE_CURSOR]; @@ -13738,7 +13726,7 @@ static void intel_disable_cursor_plane(struct intel_plane *plane, struct intel_crtc *crtc) { - intel_crtc_update_cursor(&crtc->base, plane, NULL); + intel_crtc_update_cursor(plane, NULL); } static void @@ -13746,9 +13734,7 @@ intel_update_cursor_plane(struct intel_plane *plane, const struct intel_crtc_state *crtc_state, const struct intel_plane_state *state) { - struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); - - intel_crtc_update_cursor(&crtc->base, plane, state); + intel_crtc_update_cursor(plane, state); } static struct intel_plane * @@ -13782,6 +13768,10 @@ intel_cursor_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe) cursor->update_plane = intel_update_cursor_plane; cursor->disable_plane = intel_disable_cursor_plane; + cursor->cursor.base = ~0; + cursor->cursor.cntl = ~0; + cursor->cursor.size = ~0; + ret = drm_universal_plane_init(&dev_priv->drm, &cursor->base, 0, &intel_cursor_plane_funcs, intel_cursor_formats, @@ -13889,10 +13879,6 @@ static int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe) intel_crtc->pipe = pipe; intel_crtc->plane = primary->plane; - intel_crtc->cursor_base = ~0; - intel_crtc->cursor_cntl = ~0; - intel_crtc->cursor_size = ~0; - /* initialize shared scalers */ intel_crtc_init_scalers(intel_crtc, crtc_state); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 54382f1f961c..d954fe458a61 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -757,11 +757,6 @@ struct intel_crtc { int adjusted_x; int adjusted_y; - uint32_t cursor_addr; - uint32_t cursor_cntl; - uint32_t cursor_size; - uint32_t cursor_base; - struct intel_crtc_state *config; /* global reset count when the last flip was submitted */ @@ -802,6 +797,10 @@ struct intel_plane { int max_downscale; uint32_t frontbuffer_bit; + struct { + u32 base, cntl, size; + } cursor; + /* * NOTE: Do not place new plane state fields here (e.g., when adding * new plane properties). New runtime state should now be placed in -- 2.10.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
