On Wed, Apr 18, 2012 at 11:51:15AM -0300, Eugeni Dodonov wrote:
> This moves DRPS, RPS and RC6-related functionality into intel_pm module.
>
> It also removes the linux/cpufreq.h include from intel_display, as its
> only user was the GPU turbo-related functionality in Gen6+ code path.
>
> Acked-by: Jesse Barnes <[email protected]>
> Acked-by: Ben Widawsky <[email protected]>
> Signed-off-by: Eugeni Dodonov <[email protected]>
> @@ -6609,232 +6437,6 @@ void intel_init_emon(struct drm_device *dev)
> dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK);
> }
>
> -int intel_enable_rc6(const struct drm_device *dev)
> -{
> - /*
> - * Respect the kernel parameter if it is set
> - */
> - if (i915_enable_rc6 >= 0)
> - return i915_enable_rc6;
> -
> - /*
> - * Disable RC6 on Ironlake
> - */
> - if (INTEL_INFO(dev)->gen == 5)
> - return 0;
> -
> - /* Sorry Haswell, no RC6 for you for now. */
> - if (IS_HASWELL(dev))
> - return 0;
You remove this line but don't readd it. Not good.
-Daniel
> -
> - /*
> - * Disable rc6 on Sandybridge
> - */
> - if (INTEL_INFO(dev)->gen == 6) {
> - DRM_DEBUG_DRIVER("Sandybridge: deep RC6 disabled\n");
> - return INTEL_RC6_ENABLE;
> - }
> - DRM_DEBUG_DRIVER("RC6 and deep RC6 enabled\n");
> - return (INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE);
> -}
> -
> -void gen6_enable_rps(struct drm_i915_private *dev_priv)
> -{
> - u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
> - u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
> - u32 pcu_mbox, rc6_mask = 0;
> - u32 gtfifodbg;
> - int cur_freq, min_freq, max_freq;
> - int rc6_mode;
> - int i;
> -
> - /* Here begins a magic sequence of register writes to enable
> - * auto-downclocking.
> - *
> - * Perhaps there might be some value in exposing these to
> - * userspace...
> - */
> - I915_WRITE(GEN6_RC_STATE, 0);
> - mutex_lock(&dev_priv->dev->struct_mutex);
> -
> - /* Clear the DBG now so we don't confuse earlier errors */
> - if ((gtfifodbg = I915_READ(GTFIFODBG))) {
> - DRM_ERROR("GT fifo had a previous error %x\n", gtfifodbg);
> - I915_WRITE(GTFIFODBG, gtfifodbg);
> - }
> -
> - gen6_gt_force_wake_get(dev_priv);
> -
> - /* disable the counters and set deterministic thresholds */
> - I915_WRITE(GEN6_RC_CONTROL, 0);
> -
> - I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16);
> - I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30);
> - I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30);
> - I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
> - I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
> -
> - for (i = 0; i < I915_NUM_RINGS; i++)
> - I915_WRITE(RING_MAX_IDLE(dev_priv->ring[i].mmio_base), 10);
> -
> - I915_WRITE(GEN6_RC_SLEEP, 0);
> - I915_WRITE(GEN6_RC1e_THRESHOLD, 1000);
> - I915_WRITE(GEN6_RC6_THRESHOLD, 50000);
> - I915_WRITE(GEN6_RC6p_THRESHOLD, 100000);
> - I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
> -
> - rc6_mode = intel_enable_rc6(dev_priv->dev);
> - if (rc6_mode & INTEL_RC6_ENABLE)
> - rc6_mask |= GEN6_RC_CTL_RC6_ENABLE;
> -
> - if (rc6_mode & INTEL_RC6p_ENABLE)
> - rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE;
> -
> - if (rc6_mode & INTEL_RC6pp_ENABLE)
> - rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE;
> -
> - DRM_INFO("Enabling RC6 states: RC6 %s, RC6p %s, RC6pp %s\n",
> - (rc6_mode & INTEL_RC6_ENABLE) ? "on" : "off",
> - (rc6_mode & INTEL_RC6p_ENABLE) ? "on" : "off",
> - (rc6_mode & INTEL_RC6pp_ENABLE) ? "on" : "off");
> -
> - I915_WRITE(GEN6_RC_CONTROL,
> - rc6_mask |
> - GEN6_RC_CTL_EI_MODE(1) |
> - GEN6_RC_CTL_HW_ENABLE);
> -
> - I915_WRITE(GEN6_RPNSWREQ,
> - GEN6_FREQUENCY(10) |
> - GEN6_OFFSET(0) |
> - GEN6_AGGRESSIVE_TURBO);
> - I915_WRITE(GEN6_RC_VIDEO_FREQ,
> - GEN6_FREQUENCY(12));
> -
> - I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
> - I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
> - 18 << 24 |
> - 6 << 16);
> - I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000);
> - I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000);
> - I915_WRITE(GEN6_RP_UP_EI, 100000);
> - I915_WRITE(GEN6_RP_DOWN_EI, 5000000);
> - I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
> - I915_WRITE(GEN6_RP_CONTROL,
> - GEN6_RP_MEDIA_TURBO |
> - GEN6_RP_MEDIA_HW_MODE |
> - GEN6_RP_MEDIA_IS_GFX |
> - GEN6_RP_ENABLE |
> - GEN6_RP_UP_BUSY_AVG |
> - GEN6_RP_DOWN_IDLE_CONT);
> -
> - if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
> - 500))
> - DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
> -
> - I915_WRITE(GEN6_PCODE_DATA, 0);
> - I915_WRITE(GEN6_PCODE_MAILBOX,
> - GEN6_PCODE_READY |
> - GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
> - if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
> - 500))
> - DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
> -
> - min_freq = (rp_state_cap & 0xff0000) >> 16;
> - max_freq = rp_state_cap & 0xff;
> - cur_freq = (gt_perf_status & 0xff00) >> 8;
> -
> - /* Check for overclock support */
> - if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
> - 500))
> - DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
> - I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_READ_OC_PARAMS);
> - pcu_mbox = I915_READ(GEN6_PCODE_DATA);
> - if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
> - 500))
> - DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
> - if (pcu_mbox & (1<<31)) { /* OC supported */
> - max_freq = pcu_mbox & 0xff;
> - DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency
> max to %dMHz\n", pcu_mbox * 50);
> - }
> -
> - /* In units of 100MHz */
> - dev_priv->max_delay = max_freq;
> - dev_priv->min_delay = min_freq;
> - dev_priv->cur_delay = cur_freq;
> -
> - /* requires MSI enabled */
> - I915_WRITE(GEN6_PMIER,
> - GEN6_PM_MBOX_EVENT |
> - GEN6_PM_THERMAL_EVENT |
> - GEN6_PM_RP_DOWN_TIMEOUT |
> - GEN6_PM_RP_UP_THRESHOLD |
> - GEN6_PM_RP_DOWN_THRESHOLD |
> - GEN6_PM_RP_UP_EI_EXPIRED |
> - GEN6_PM_RP_DOWN_EI_EXPIRED);
> - spin_lock_irq(&dev_priv->rps_lock);
> - WARN_ON(dev_priv->pm_iir != 0);
> - I915_WRITE(GEN6_PMIMR, 0);
> - spin_unlock_irq(&dev_priv->rps_lock);
> - /* enable all PM interrupts */
> - I915_WRITE(GEN6_PMINTRMSK, 0);
> -
> - gen6_gt_force_wake_put(dev_priv);
> - mutex_unlock(&dev_priv->dev->struct_mutex);
> -}
> -
> -void gen6_update_ring_freq(struct drm_i915_private *dev_priv)
> -{
> - int min_freq = 15;
> - int gpu_freq, ia_freq, max_ia_freq;
> - int scaling_factor = 180;
> -
> - max_ia_freq = cpufreq_quick_get_max(0);
> - /*
> - * Default to measured freq if none found, PCU will ensure we don't go
> - * over
> - */
> - if (!max_ia_freq)
> - max_ia_freq = tsc_khz;
> -
> - /* Convert from kHz to MHz */
> - max_ia_freq /= 1000;
> -
> - mutex_lock(&dev_priv->dev->struct_mutex);
> -
> - /*
> - * For each potential GPU frequency, load a ring frequency we'd like
> - * to use for memory access. We do this by specifying the IA frequency
> - * the PCU should use as a reference to determine the ring frequency.
> - */
> - for (gpu_freq = dev_priv->max_delay; gpu_freq >= dev_priv->min_delay;
> - gpu_freq--) {
> - int diff = dev_priv->max_delay - gpu_freq;
> -
> - /*
> - * For GPU frequencies less than 750MHz, just use the lowest
> - * ring freq.
> - */
> - if (gpu_freq < min_freq)
> - ia_freq = 800;
> - else
> - ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
> - ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
> -
> - I915_WRITE(GEN6_PCODE_DATA,
> - (ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT) |
> - gpu_freq);
> - I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY |
> - GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
> - if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) &
> - GEN6_PCODE_READY) == 0, 10)) {
> - DRM_ERROR("pcode write of freq table timed out\n");
> - continue;
> - }
> - }
> -
> - mutex_unlock(&dev_priv->dev->struct_mutex);
> -}
> -
> static void ironlake_init_clock_gating(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -7178,121 +6780,6 @@ static void cpt_init_clock_gating(struct drm_device
> *dev)
> I915_WRITE(TRANS_CHICKEN2(pipe), TRANS_AUTOTRAIN_GEN_STALL_DIS);
> }
>
> -static void ironlake_teardown_rc6(struct drm_device *dev)
> -{
> - struct drm_i915_private *dev_priv = dev->dev_private;
> -
> - if (dev_priv->renderctx) {
> - i915_gem_object_unpin(dev_priv->renderctx);
> - drm_gem_object_unreference(&dev_priv->renderctx->base);
> - dev_priv->renderctx = NULL;
> - }
> -
> - if (dev_priv->pwrctx) {
> - i915_gem_object_unpin(dev_priv->pwrctx);
> - drm_gem_object_unreference(&dev_priv->pwrctx->base);
> - dev_priv->pwrctx = NULL;
> - }
> -}
> -
> -static void ironlake_disable_rc6(struct drm_device *dev)
> -{
> - struct drm_i915_private *dev_priv = dev->dev_private;
> -
> - if (I915_READ(PWRCTXA)) {
> - /* Wake the GPU, prevent RC6, then restore RSTDBYCTL */
> - I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) | RCX_SW_EXIT);
> - wait_for(((I915_READ(RSTDBYCTL) & RSX_STATUS_MASK) ==
> RSX_STATUS_ON),
> - 50);
> -
> - I915_WRITE(PWRCTXA, 0);
> - POSTING_READ(PWRCTXA);
> -
> - I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
> - POSTING_READ(RSTDBYCTL);
> - }
> -
> - ironlake_teardown_rc6(dev);
> -}
> -
> -static int ironlake_setup_rc6(struct drm_device *dev)
> -{
> - struct drm_i915_private *dev_priv = dev->dev_private;
> -
> - if (dev_priv->renderctx == NULL)
> - dev_priv->renderctx = intel_alloc_context_page(dev);
> - if (!dev_priv->renderctx)
> - return -ENOMEM;
> -
> - if (dev_priv->pwrctx == NULL)
> - dev_priv->pwrctx = intel_alloc_context_page(dev);
> - if (!dev_priv->pwrctx) {
> - ironlake_teardown_rc6(dev);
> - return -ENOMEM;
> - }
> -
> - return 0;
> -}
> -
> -void ironlake_enable_rc6(struct drm_device *dev)
> -{
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - int ret;
> -
> - /* rc6 disabled by default due to repeated reports of hanging during
> - * boot and resume.
> - */
> - if (!intel_enable_rc6(dev))
> - return;
> -
> - mutex_lock(&dev->struct_mutex);
> - ret = ironlake_setup_rc6(dev);
> - if (ret) {
> - mutex_unlock(&dev->struct_mutex);
> - return;
> - }
> -
> - /*
> - * GPU can automatically power down the render unit if given a page
> - * to save state.
> - */
> - ret = BEGIN_LP_RING(6);
> - if (ret) {
> - ironlake_teardown_rc6(dev);
> - mutex_unlock(&dev->struct_mutex);
> - return;
> - }
> -
> - OUT_RING(MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN);
> - OUT_RING(MI_SET_CONTEXT);
> - OUT_RING(dev_priv->renderctx->gtt_offset |
> - MI_MM_SPACE_GTT |
> - MI_SAVE_EXT_STATE_EN |
> - MI_RESTORE_EXT_STATE_EN |
> - MI_RESTORE_INHIBIT);
> - OUT_RING(MI_SUSPEND_FLUSH);
> - OUT_RING(MI_NOOP);
> - OUT_RING(MI_FLUSH);
> - ADVANCE_LP_RING();
> -
> - /*
> - * Wait for the command parser to advance past MI_SET_CONTEXT. The HW
> - * does an implicit flush, combined with MI_FLUSH above, it should be
> - * safe to assume that renderctx is valid
> - */
> - ret = intel_wait_ring_idle(LP_RING(dev_priv));
> - if (ret) {
> - DRM_ERROR("failed to enable ironlake power power savings\n");
> - ironlake_teardown_rc6(dev);
> - mutex_unlock(&dev->struct_mutex);
> - return;
> - }
> -
> - I915_WRITE(PWRCTXA, dev_priv->pwrctx->gtt_offset | PWRCTX_EN);
> - I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
> - mutex_unlock(&dev->struct_mutex);
> -}
> -
> void intel_init_clock_gating(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index f1e27ce..c87f29a 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -396,6 +396,7 @@ extern void intel_crtc_fb_gamma_set(struct drm_crtc
> *crtc, u16 red, u16 green,
> extern void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16
> *green,
> u16 *blue, int regno);
> extern void intel_enable_clock_gating(struct drm_device *dev);
> +extern void ironlake_disable_rc6(struct drm_device *dev);
> extern void ironlake_enable_drps(struct drm_device *dev);
> extern void ironlake_disable_drps(struct drm_device *dev);
> extern void gen6_enable_rps(struct drm_i915_private *dev_priv);
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index c5bc4c4..58b26df0 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -25,6 +25,7 @@
> *
> */
>
> +#include <linux/cpufreq.h>
> #include "i915_drv.h"
> #include "intel_drv.h"
>
> @@ -1979,3 +1980,511 @@ void intel_update_sprite_watermarks(struct drm_device
> *dev, int pipe,
> pixel_size);
> }
>
> +static struct drm_i915_gem_object *
> +intel_alloc_context_page(struct drm_device *dev)
> +{
> + struct drm_i915_gem_object *ctx;
> + int ret;
> +
> + WARN_ON(!mutex_is_locked(&dev->struct_mutex));
> +
> + ctx = i915_gem_alloc_object(dev, 4096);
> + if (!ctx) {
> + DRM_DEBUG("failed to alloc power context, RC6 disabled\n");
> + return NULL;
> + }
> +
> + ret = i915_gem_object_pin(ctx, 4096, true);
> + if (ret) {
> + DRM_ERROR("failed to pin power context: %d\n", ret);
> + goto err_unref;
> + }
> +
> + ret = i915_gem_object_set_to_gtt_domain(ctx, 1);
> + if (ret) {
> + DRM_ERROR("failed to set-domain on power context: %d\n", ret);
> + goto err_unpin;
> + }
> +
> + return ctx;
> +
> +err_unpin:
> + i915_gem_object_unpin(ctx);
> +err_unref:
> + drm_gem_object_unreference(&ctx->base);
> + mutex_unlock(&dev->struct_mutex);
> + return NULL;
> +}
> +
> +bool ironlake_set_drps(struct drm_device *dev, u8 val)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + u16 rgvswctl;
> +
> + rgvswctl = I915_READ16(MEMSWCTL);
> + if (rgvswctl & MEMCTL_CMD_STS) {
> + DRM_DEBUG("gpu busy, RCS change rejected\n");
> + return false; /* still busy with another command */
> + }
> +
> + rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
> + (val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
> + I915_WRITE16(MEMSWCTL, rgvswctl);
> + POSTING_READ16(MEMSWCTL);
> +
> + rgvswctl |= MEMCTL_CMD_STS;
> + I915_WRITE16(MEMSWCTL, rgvswctl);
> +
> + return true;
> +}
> +
> +void ironlake_enable_drps(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + u32 rgvmodectl = I915_READ(MEMMODECTL);
> + u8 fmax, fmin, fstart, vstart;
> +
> + /* Enable temp reporting */
> + I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN);
> + I915_WRITE16(TSC1, I915_READ(TSC1) | TSE);
> +
> + /* 100ms RC evaluation intervals */
> + I915_WRITE(RCUPEI, 100000);
> + I915_WRITE(RCDNEI, 100000);
> +
> + /* Set max/min thresholds to 90ms and 80ms respectively */
> + I915_WRITE(RCBMAXAVG, 90000);
> + I915_WRITE(RCBMINAVG, 80000);
> +
> + I915_WRITE(MEMIHYST, 1);
> +
> + /* Set up min, max, and cur for interrupt handling */
> + fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT;
> + fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
> + fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
> + MEMMODE_FSTART_SHIFT;
> +
> + vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
> + PXVFREQ_PX_SHIFT;
> +
> + dev_priv->fmax = fmax; /* IPS callback will increase this */
> + dev_priv->fstart = fstart;
> +
> + dev_priv->max_delay = fstart;
> + dev_priv->min_delay = fmin;
> + dev_priv->cur_delay = fstart;
> +
> + DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
> + fmax, fmin, fstart);
> +
> + I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
> +
> + /*
> + * Interrupts will be enabled in ironlake_irq_postinstall
> + */
> +
> + I915_WRITE(VIDSTART, vstart);
> + POSTING_READ(VIDSTART);
> +
> + rgvmodectl |= MEMMODE_SWMODE_EN;
> + I915_WRITE(MEMMODECTL, rgvmodectl);
> +
> + if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10))
> + DRM_ERROR("stuck trying to change perf mode\n");
> + msleep(1);
> +
> + ironlake_set_drps(dev, fstart);
> +
> + dev_priv->last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) +
> + I915_READ(0x112e0);
> + dev_priv->last_time1 = jiffies_to_msecs(jiffies);
> + dev_priv->last_count2 = I915_READ(0x112f4);
> + getrawmonotonic(&dev_priv->last_time2);
> +}
> +
> +void ironlake_disable_drps(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + u16 rgvswctl = I915_READ16(MEMSWCTL);
> +
> + /* Ack interrupts, disable EFC interrupt */
> + I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
> + I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG);
> + I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT);
> + I915_WRITE(DEIIR, DE_PCU_EVENT);
> + I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT);
> +
> + /* Go back to the starting frequency */
> + ironlake_set_drps(dev, dev_priv->fstart);
> + msleep(1);
> + rgvswctl |= MEMCTL_CMD_STS;
> + I915_WRITE(MEMSWCTL, rgvswctl);
> + msleep(1);
> +
> +}
> +
> +void gen6_set_rps(struct drm_device *dev, u8 val)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + u32 swreq;
> +
> + swreq = (val & 0x3ff) << 25;
> + I915_WRITE(GEN6_RPNSWREQ, swreq);
> +}
> +
> +void gen6_disable_rps(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> +
> + I915_WRITE(GEN6_RPNSWREQ, 1 << 31);
> + I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
> + I915_WRITE(GEN6_PMIER, 0);
> + /* Complete PM interrupt masking here doesn't race with the rps work
> + * item again unmasking PM interrupts because that is using a different
> + * register (PMIMR) to mask PM interrupts. The only risk is in leaving
> + * stale bits in PMIIR and PMIMR which gen6_enable_rps will clean up. */
> +
> + spin_lock_irq(&dev_priv->rps_lock);
> + dev_priv->pm_iir = 0;
> + spin_unlock_irq(&dev_priv->rps_lock);
> +
> + I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR));
> +}
> +
> +int intel_enable_rc6(const struct drm_device *dev)
> +{
> + /*
> + * Respect the kernel parameter if it is set
> + */
> + if (i915_enable_rc6 >= 0)
> + return i915_enable_rc6;
> +
> + /*
> + * Disable RC6 on Ironlake
> + */
> + if (INTEL_INFO(dev)->gen == 5)
> + return 0;
> +
> + /*
> + * Disable rc6 on Sandybridge
> + */
> + if (INTEL_INFO(dev)->gen == 6) {
> + DRM_DEBUG_DRIVER("Sandybridge: deep RC6 disabled\n");
> + return INTEL_RC6_ENABLE;
> + }
> + DRM_DEBUG_DRIVER("RC6 and deep RC6 enabled\n");
> + return (INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE);
> +}
> +
> +void gen6_enable_rps(struct drm_i915_private *dev_priv)
> +{
> + u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
> + u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
> + u32 pcu_mbox, rc6_mask = 0;
> + u32 gtfifodbg;
> + int cur_freq, min_freq, max_freq;
> + int rc6_mode;
> + int i;
> +
> + /* Here begins a magic sequence of register writes to enable
> + * auto-downclocking.
> + *
> + * Perhaps there might be some value in exposing these to
> + * userspace...
> + */
> + I915_WRITE(GEN6_RC_STATE, 0);
> + mutex_lock(&dev_priv->dev->struct_mutex);
> +
> + /* Clear the DBG now so we don't confuse earlier errors */
> + if ((gtfifodbg = I915_READ(GTFIFODBG))) {
> + DRM_ERROR("GT fifo had a previous error %x\n", gtfifodbg);
> + I915_WRITE(GTFIFODBG, gtfifodbg);
> + }
> +
> + gen6_gt_force_wake_get(dev_priv);
> +
> + /* disable the counters and set deterministic thresholds */
> + I915_WRITE(GEN6_RC_CONTROL, 0);
> +
> + I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16);
> + I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30);
> + I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30);
> + I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
> + I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
> +
> + for (i = 0; i < I915_NUM_RINGS; i++)
> + I915_WRITE(RING_MAX_IDLE(dev_priv->ring[i].mmio_base), 10);
> +
> + I915_WRITE(GEN6_RC_SLEEP, 0);
> + I915_WRITE(GEN6_RC1e_THRESHOLD, 1000);
> + I915_WRITE(GEN6_RC6_THRESHOLD, 50000);
> + I915_WRITE(GEN6_RC6p_THRESHOLD, 100000);
> + I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
> +
> + rc6_mode = intel_enable_rc6(dev_priv->dev);
> + if (rc6_mode & INTEL_RC6_ENABLE)
> + rc6_mask |= GEN6_RC_CTL_RC6_ENABLE;
> +
> + if (rc6_mode & INTEL_RC6p_ENABLE)
> + rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE;
> +
> + if (rc6_mode & INTEL_RC6pp_ENABLE)
> + rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE;
> +
> + DRM_INFO("Enabling RC6 states: RC6 %s, RC6p %s, RC6pp %s\n",
> + (rc6_mode & INTEL_RC6_ENABLE) ? "on" : "off",
> + (rc6_mode & INTEL_RC6p_ENABLE) ? "on" : "off",
> + (rc6_mode & INTEL_RC6pp_ENABLE) ? "on" : "off");
> +
> + I915_WRITE(GEN6_RC_CONTROL,
> + rc6_mask |
> + GEN6_RC_CTL_EI_MODE(1) |
> + GEN6_RC_CTL_HW_ENABLE);
> +
> + I915_WRITE(GEN6_RPNSWREQ,
> + GEN6_FREQUENCY(10) |
> + GEN6_OFFSET(0) |
> + GEN6_AGGRESSIVE_TURBO);
> + I915_WRITE(GEN6_RC_VIDEO_FREQ,
> + GEN6_FREQUENCY(12));
> +
> + I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
> + I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
> + 18 << 24 |
> + 6 << 16);
> + I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000);
> + I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000);
> + I915_WRITE(GEN6_RP_UP_EI, 100000);
> + I915_WRITE(GEN6_RP_DOWN_EI, 5000000);
> + I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
> + I915_WRITE(GEN6_RP_CONTROL,
> + GEN6_RP_MEDIA_TURBO |
> + GEN6_RP_MEDIA_HW_MODE |
> + GEN6_RP_MEDIA_IS_GFX |
> + GEN6_RP_ENABLE |
> + GEN6_RP_UP_BUSY_AVG |
> + GEN6_RP_DOWN_IDLE_CONT);
> +
> + if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
> + 500))
> + DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
> +
> + I915_WRITE(GEN6_PCODE_DATA, 0);
> + I915_WRITE(GEN6_PCODE_MAILBOX,
> + GEN6_PCODE_READY |
> + GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
> + if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
> + 500))
> + DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
> +
> + min_freq = (rp_state_cap & 0xff0000) >> 16;
> + max_freq = rp_state_cap & 0xff;
> + cur_freq = (gt_perf_status & 0xff00) >> 8;
> +
> + /* Check for overclock support */
> + if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
> + 500))
> + DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
> + I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_READ_OC_PARAMS);
> + pcu_mbox = I915_READ(GEN6_PCODE_DATA);
> + if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
> + 500))
> + DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
> + if (pcu_mbox & (1<<31)) { /* OC supported */
> + max_freq = pcu_mbox & 0xff;
> + DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency
> max to %dMHz\n", pcu_mbox * 50);
> + }
> +
> + /* In units of 100MHz */
> + dev_priv->max_delay = max_freq;
> + dev_priv->min_delay = min_freq;
> + dev_priv->cur_delay = cur_freq;
> +
> + /* requires MSI enabled */
> + I915_WRITE(GEN6_PMIER,
> + GEN6_PM_MBOX_EVENT |
> + GEN6_PM_THERMAL_EVENT |
> + GEN6_PM_RP_DOWN_TIMEOUT |
> + GEN6_PM_RP_UP_THRESHOLD |
> + GEN6_PM_RP_DOWN_THRESHOLD |
> + GEN6_PM_RP_UP_EI_EXPIRED |
> + GEN6_PM_RP_DOWN_EI_EXPIRED);
> + spin_lock_irq(&dev_priv->rps_lock);
> + WARN_ON(dev_priv->pm_iir != 0);
> + I915_WRITE(GEN6_PMIMR, 0);
> + spin_unlock_irq(&dev_priv->rps_lock);
> + /* enable all PM interrupts */
> + I915_WRITE(GEN6_PMINTRMSK, 0);
> +
> + gen6_gt_force_wake_put(dev_priv);
> + mutex_unlock(&dev_priv->dev->struct_mutex);
> +}
> +
> +void gen6_update_ring_freq(struct drm_i915_private *dev_priv)
> +{
> + int min_freq = 15;
> + int gpu_freq, ia_freq, max_ia_freq;
> + int scaling_factor = 180;
> +
> + max_ia_freq = cpufreq_quick_get_max(0);
> + /*
> + * Default to measured freq if none found, PCU will ensure we don't go
> + * over
> + */
> + if (!max_ia_freq)
> + max_ia_freq = tsc_khz;
> +
> + /* Convert from kHz to MHz */
> + max_ia_freq /= 1000;
> +
> + mutex_lock(&dev_priv->dev->struct_mutex);
> +
> + /*
> + * For each potential GPU frequency, load a ring frequency we'd like
> + * to use for memory access. We do this by specifying the IA frequency
> + * the PCU should use as a reference to determine the ring frequency.
> + */
> + for (gpu_freq = dev_priv->max_delay; gpu_freq >= dev_priv->min_delay;
> + gpu_freq--) {
> + int diff = dev_priv->max_delay - gpu_freq;
> +
> + /*
> + * For GPU frequencies less than 750MHz, just use the lowest
> + * ring freq.
> + */
> + if (gpu_freq < min_freq)
> + ia_freq = 800;
> + else
> + ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
> + ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
> +
> + I915_WRITE(GEN6_PCODE_DATA,
> + (ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT) |
> + gpu_freq);
> + I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY |
> + GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
> + if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) &
> + GEN6_PCODE_READY) == 0, 10)) {
> + DRM_ERROR("pcode write of freq table timed out\n");
> + continue;
> + }
> + }
> +
> + mutex_unlock(&dev_priv->dev->struct_mutex);
> +}
> +
> +static void ironlake_teardown_rc6(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> +
> + if (dev_priv->renderctx) {
> + i915_gem_object_unpin(dev_priv->renderctx);
> + drm_gem_object_unreference(&dev_priv->renderctx->base);
> + dev_priv->renderctx = NULL;
> + }
> +
> + if (dev_priv->pwrctx) {
> + i915_gem_object_unpin(dev_priv->pwrctx);
> + drm_gem_object_unreference(&dev_priv->pwrctx->base);
> + dev_priv->pwrctx = NULL;
> + }
> +}
> +
> +void ironlake_disable_rc6(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> +
> + if (I915_READ(PWRCTXA)) {
> + /* Wake the GPU, prevent RC6, then restore RSTDBYCTL */
> + I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) | RCX_SW_EXIT);
> + wait_for(((I915_READ(RSTDBYCTL) & RSX_STATUS_MASK) ==
> RSX_STATUS_ON),
> + 50);
> +
> + I915_WRITE(PWRCTXA, 0);
> + POSTING_READ(PWRCTXA);
> +
> + I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
> + POSTING_READ(RSTDBYCTL);
> + }
> +
> + ironlake_teardown_rc6(dev);
> +}
> +
> +static int ironlake_setup_rc6(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> +
> + if (dev_priv->renderctx == NULL)
> + dev_priv->renderctx = intel_alloc_context_page(dev);
> + if (!dev_priv->renderctx)
> + return -ENOMEM;
> +
> + if (dev_priv->pwrctx == NULL)
> + dev_priv->pwrctx = intel_alloc_context_page(dev);
> + if (!dev_priv->pwrctx) {
> + ironlake_teardown_rc6(dev);
> + return -ENOMEM;
> + }
> +
> + return 0;
> +}
> +
> +void ironlake_enable_rc6(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + int ret;
> +
> + /* rc6 disabled by default due to repeated reports of hanging during
> + * boot and resume.
> + */
> + if (!intel_enable_rc6(dev))
> + return;
> +
> + mutex_lock(&dev->struct_mutex);
> + ret = ironlake_setup_rc6(dev);
> + if (ret) {
> + mutex_unlock(&dev->struct_mutex);
> + return;
> + }
> +
> + /*
> + * GPU can automatically power down the render unit if given a page
> + * to save state.
> + */
> + ret = BEGIN_LP_RING(6);
> + if (ret) {
> + ironlake_teardown_rc6(dev);
> + mutex_unlock(&dev->struct_mutex);
> + return;
> + }
> +
> + OUT_RING(MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN);
> + OUT_RING(MI_SET_CONTEXT);
> + OUT_RING(dev_priv->renderctx->gtt_offset |
> + MI_MM_SPACE_GTT |
> + MI_SAVE_EXT_STATE_EN |
> + MI_RESTORE_EXT_STATE_EN |
> + MI_RESTORE_INHIBIT);
> + OUT_RING(MI_SUSPEND_FLUSH);
> + OUT_RING(MI_NOOP);
> + OUT_RING(MI_FLUSH);
> + ADVANCE_LP_RING();
> +
> + /*
> + * Wait for the command parser to advance past MI_SET_CONTEXT. The HW
> + * does an implicit flush, combined with MI_FLUSH above, it should be
> + * safe to assume that renderctx is valid
> + */
> + ret = intel_wait_ring_idle(LP_RING(dev_priv));
> + if (ret) {
> + DRM_ERROR("failed to enable ironlake power power savings\n");
> + ironlake_teardown_rc6(dev);
> + mutex_unlock(&dev->struct_mutex);
> + return;
> + }
> +
> + I915_WRITE(PWRCTXA, dev_priv->pwrctx->gtt_offset | PWRCTX_EN);
> + I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
> + mutex_unlock(&dev->struct_mutex);
> +}
> +
> --
> 1.7.10
>
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Mail: [email protected]
Mobile: +41 (0)79 365 57 48
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
